|
SLOVENSKI STANDARD
01-julij-2021
Nadomešča:
SIST EN 60809:2015
SIST EN 60809:2015/A1:2018
SIST EN 60809:2015/A3:2019
SIST EN IEC 60809:2015/A2:2018
Sijalke in viri svetlobe za cestna vozila - Dimenzijske, električne in svetlobne
zahteve (IEC 60809:2021)
Lamps and light sources for road vehicles - Dimensional, electrical and luminous
requirements (IEC 60809:2021)
Lampen für Straßenfahrzeuge - Maße, elektrische und lichttechnische Anforderungen
(IEC 60809:2021)
Lampes pour véhicules routiers - Exigences dimensionnelles, électriques et lumineuses
(IEC 60809:2021)
Ta slovenski standard je istoveten z: EN IEC 60809:2021
ICS:
29.140.20 Žarnice z žarilno nitko Incandescent lamps
43.040.20 Naprave za osvetlitev, Lighting, signalling and
signalizacijo in opozarjanje warning devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 60809
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2021
ICS 43.040.20; 29.140.20 Supersedes EN 60809:2015 and all of its amendments
and corrigenda (if any)
English Version
Lamps and light sources for road vehicles - Dimensional,
electrical and luminous requirements
(IEC 60809:2021)
Lampes et sources lumineuses pour véhicules routiers - Lampen und Lichtquellen für Straßenfahrzeuge - Maße,
Exigences dimensionnelles, électriques et lumineuses elektrische und lichttechnische Anforderungen
(IEC 60809:2021) (IEC 60809:2021)
This European Standard was approved by CENELEC on 2021-05-12. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60809:2021 E
European foreword
The text of document 34A/2232/FDIS, future edition 4 of IEC 60809, prepared by SC 34A "Electric
light sources" of IEC/TC 34 "Lighting" was submitted to the IEC-CENELEC parallel vote and approved
by CENELEC as EN IEC 60809:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-02-12
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-05-12
document have to be withdrawn
This document supersedes EN 60809:2015 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60809:2021 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60983 NOTE Harmonized as EN 60983
IEC 62504 NOTE Harmonized as EN 62504
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60050-845 - International Electrotechnical Vocabulary. - -
Lighting
IEC 60051-1 - Direct acting indicating analogue electrical EN 60051-1 -
measuring instruments and their
accessories - Part 1: Definitions and
general requirements common to all parts
IEC 60061-1 - Lamp caps and holders together with EN 60061-1 -
gauges for the control ofinterchangeability
and safety. Part 1: Lamp caps
IEC 60810 2017 Lamps, light sources and LED packages EN IEC 60810 2018
for road vehicles - Performance
requirements
+ A1 2019 + A1 2019
CIE 015 - Colorimetry - -
IEC 60809
Edition 4.0 2021-04
INTERNATIONAL
STANDARD
colour
inside
Lamps and light sources for road vehicles – Dimensional, electrical and
luminous requirements
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.140.20; 43.040.20 ISBN 978-2-8322-9634-9
– 2 – IEC 60809:2021 © IEC 2021
CONTENTS
FOREWORD . 8
1 Scope . 10
2 Normative references . 10
3 Terms and definitions . 12
4 Requirements and test conditions for filament lamps . 15
4.1 General requirements . 15
4.2 Lamp marking . 15
4.3 Bulbs . 15
4.4 Colour . 15
4.4.1 Colour of light . 15
4.4.2 Colour endurance . 17
4.4.3 Coated bulb . 17
4.5 Lamp dimensions . 17
4.6 Caps and bases . 18
4.7 Initial electrical and luminous requirements . 18
4.8 Check on optical quality . 18
4.8.1 General . 18
4.8.2 12 V lamps emitting white light . 18
4.8.3 6 V and 24 V lamps emitting white light . 18
4.8.4 Lamps emitting selective-yellow light . 19
4.9 UV radiation . 19
4.10 Standard (étalon) filament lamps . 19
4.11 Non-replaceable filament lamps . 20
4.11.1 General . 20
4.11.2 Fixation . 21
4.11.3 Lifetime . 21
4.11.4 Colour endurance . 22
4.11.5 Luminous flux and colour maintenance . 22
4.11.6 Vibration and shock resistance . 22
5 Requirements and test conditions for discharge lamps . 22
5.1 General requirements . 22
5.2 Lamp marking . 22
5.3 Bulbs . 23
5.4 Caps . 23
5.5 Position and dimensions of electrodes, arc and black stripes . 23
5.5.1 Measurements . 23
5.5.2 Electrodes . 23
5.5.3 Arc . 23
5.5.4 Black stripes . 23
5.6 Starting, run-up and hot-restrike characteristics . 24
5.6.1 Starting . 24
5.6.2 Run-up . 24
5.6.3 Hot-restrike. 24
5.6.4 Compliance . 24
5.7 Electrical and photometric characteristics . 25
5.7.1 Voltage and wattage . 25
5.7.2 Luminous flux . 25
IEC 60809:2021 © IEC 2021 – 3 –
5.7.3 Compliance . 25
5.8 Colour . 25
5.9 UV radiation . 26
5.10 Standard (étalon) discharge lamps . 27
6 Requirements and test conditions for LED light sources . 27
6.1 General requirements . 27
6.2 Light source marking . 27
6.3 Optical surfaces . 27
6.4 Colour of light . 27
6.5 Lamp dimensions . 27
6.6 Caps and bases . 28
6.7 Initial electrical and photometrical requirements . 28
6.8 Red content . 28
6.9 UV radiation . 29
6.10 Standard (étalon) light sources . 29
7 Sampling and conditions of compliance . 29
8 Lamp data sheets . 29
8.1 General . 29
8.2 List of specific lamp types . 30
8.3 Data sheets not transferr
...