|
SLOVENSKI STANDARD
01-julij-2021
Pakiranje komponent za avtomatsko obdelavo - 1. del: Trakanje komponent z
osnimi izvodi/priključki na neprekinjenih trakovih - Dopolnilo A1 (IEC 60286-
1:2017/A1:2021)
Packaging of components for automatic handling - Part 1: Tape packaging of
components with axial leads on continuous tapes (IEC 60286-1:2017/A1:2021)
Gurtung und Magazinierung von Bauelementen für automatische Verarbeitung - Teil 1:
Gurtung von Bauelementen mit axialen Anschlüssen (IEC 60286-1:2017/A1:2021)
Amendement 1 - Emballage des composants pour opérations automatisées - Partie 1:
Mise en bande des composants à sorties axiales en bandes continues (IEC 60286-
1:2017/A1:2021)
Ta slovenski standard je istoveten z: EN 60286-1:2017/A1:2021
ICS:
31.020 Elektronske komponente na Electronic components in
splošno general
55.060 Tulci. Vretena Spools. Bobbins
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 60286-1:2017/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2021
ICS 31.020; 31.240
English Version
Packaging of components for automatic handling - Part 1: Tape
packaging of components with axial leads on continuous tapes
(IEC 60286-1:2017/A1:2021)
Emballage des composants pour opérations automatisées - Gurtung und Magazinierung von Bauelementen für
Partie 1: Mise en bande des composants à sorties axiales automatische Verarbeitung - Teil 1: Gurtung von
en bandes continues Bauelementen mit axialen Anschlüssen
(IEC 60286-1:2017/A1:2021) (IEC 60286-1:2017/A1:2021)
This amendment A1 modifies the European Standard EN 60286-1:2017; it was approved by CENELEC on 2021-05-12. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60286-1:2017/A1:2021 E
European foreword
The text of document 40/2822/FDIS, future IEC 60286-1/A1, prepared by IEC/TC 40 "Capacitors and
resistors for electronic equipment" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 60286-1:2017/A1:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-02-12
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-05-12
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60286-1:2017/A1:2021 was approved by CENELEC as a
European Standard without any modification.
IEC 60286-1
Edition 3.0 2021-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 1
AM ENDEMENT 1
Packaging of components for automatic handling –
Part 1: Tape packaging of components with axial leads on continuous tapes
Emballage des composants pour opérations automatisées –
Partie 1: Mise en bande des composants à sorties axiales en bandes continues
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.020 31.240 ISBN 978-2-8322-9653-0
– 2 – IEC 60286-1:2017/AMD1:2021
© IEC 2021
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING –
Part 1: Tape packaging of components
with axial leads on continuous tapes
AMENDMENT 1
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technic
...