|
SLOVENSKI STANDARD
01-julij-2021
Nadomešča:
SIST EN 60384-2:2012
Fiksni kondenzatorji za uporabo v elektronski opremi - 2. del: Področna
specifikacija - Nespremenljivi kondenzatorji z dielektrikom iz metalizirane
polipropilen-tereftalatne folije za enosmerne napetosti (IEC 60384-2:2021)
Fixed capacitors for use in electronic equipment - Part 2: Sectional specification - Fixed
metallized polyethylene-terephthalate film dielectric DC capacitors (IEC 60384-2:2021)
Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 2:
Rahmenspezifikation - Festkondensatoren mit metallisierter Kunststofffolie aus
Polyethylen-Terephthalat für Gleichspannung (IEC 60384-2:2021)
Condensateurs fixes utilisés dans les équipements électroniques - Partie 2: Spécification
intermédiaire - Condensateurs fixes pour courant continu à diélectrique en film de
téréphtalate de polyéthylène métallisé (IEC 60384-2:2021)
Ta slovenski standard je istoveten z: EN IEC 60384-2:2021
ICS:
31.060.10 Fiksni kondenzatorji Fixed capacitors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 60384-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2021
ICS 31.060.30 Supersedes EN 60384-2:2012 and all of its amendments
and corrigenda (if any)
English Version
Fixed capacitors for use in electronic equipment - Part 2:
Sectional specification - Fixed metallized polyethylene-
terephthalate film dielectric DC capacitors
(IEC 60384-2:2021)
Condensateurs fixes utilisés dans les équipements Festkondensatoren zur Verwendung in Geräten der
électroniques - Partie 2: Spécification intermédiaire - Elektronik - Teil 2: Rahmenspezifikation -
Condensateurs fixes pour courant continu à diélectrique en Festkondensatoren mit metallisierter Kunststofffolie aus
film de téréphtalate de polyéthylène métallisé Polyethylen-Terephthalat für Gleichspannung
(IEC 60384-2:2021) (IEC 60384-2:2021)
This European Standard was approved by CENELEC on 2021-05-17. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60384-2:2021 E
European foreword
The text of document 40/2821/FDIS, future edition 5 of IEC 60384-2, prepared by IEC/TC 40
"Capacitors and resistors for electronic equipment" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN IEC 60384-2:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-02-17
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-05-17
document have to be withdrawn
This document supersedes EN 60384-2:2012 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60384-2:2021 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60384-14 NOTE Harmonized as EN 60384-14
IEC 60384-19 NOTE Harmonized as EN 60384-19
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60063 2015 Preferred number series for resistors and EN 60063 2015
capacitors
IEC 60068-1 2013 Environmental testing - Part 1: General and EN 60068-1 2014
guidance
IEC 60384-1 2016 Fixed capacitors for use in electronic EN 60384-1 2016
equipment - Part 1: Generic specification
IEC 61193-2 2007 Quality assessment systems - Part 2: EN 61193-2 2007
Selection and use of sampling plans for
inspection of electronic components and
packages
ISO 3 1973 Preferred numbers - Series of preferred - -
numbers
IEC 60384-2
Edition 5.0 2021-04
INTERNATIONAL
STANDARD
Fixed capacitors for use in electronic equipment –
Part 2: Sectional specification – Fixed metallized polyethylene-terephthalate film
dielectric DC capacitors:
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 31.060.30 ISBN 978-2-8322-9654-7
– 2 – IEC 60384-2:2021 © IEC 2021
CONTENTS
FOREWORD . 5
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Preferred ratings and characteristics . 8
4.1 Preferred characteristics . 8
4.2 Preferred values of ratings . 8
4.2.1 Nominal capacitance (C ) . 8
N
4.2.2 Tolerance on nominal capacitance . 8
4.2.3 Rated voltage (U ) . 9
R
4.2.4 Category voltage (U ) . 9
C
4.2.5 Rated temperature . 9
5 Test and measurement procedures, and performance requirements . 9
5.1 Visual examination and check of dimensions . 9
5.2 Electrical tests . 9
5.2.1 Voltage proof . 9
5.2.2 Capacitance . 10
5.2.3 Tangent of loss angle (tan δ) . 10
5.2.4 Insulation resistance . 11
5.3 Robustness of terminations . 12
5.3.1 General . 12
5.3.2 Initial inspections . 12
5.3.3 Test method . 13
5.3.4 Final inspections and requirements . 13
5.4 Resistance to soldering heat . 13
5.4.1 General . 13
5.4.2 Test conditions . 13
5.4.3 Final inspections and requirements . 13
5.5 Solderability . 13
5.5.1 General . 13
5.5.2 Test conditions . 13
5.5.3 Final requirements . 14
5.6 Rapid change of the temperature . 14
5.6.1 General . 14
5.6.2 Initial inspections . 14
5.6.3 Test conditions . 14
5.6.4 Final inspections . 14
5.7 Vibration . 14
5.7.1 General . 14
5.7.2 Test conditions . 14
5.7.3 Final inspections and requirements . 14
5.8 Bump (repetitive shock) . 14
5.8.1 General . 14
5.8.2 Initial inspections . 14
5.8.3 Test conditions . 15
IEC 60384-2:2021 © IEC 2021 – 3 –
5.8.4 Final inspections and requirements . 15
5.9 Shock . 15
5.9.1 General . 15
5.9.2 Initial inspections . 15
5.9.3 Test conditions . 15
5.9.4 Final inspections and requirements . 15
5.10 Climatic sequence. 16
5.10.1 General . 16
5.10.2 Initial inspections . 16
5.10.3 Dry heat . 16
5.10.4 Damp heat, cyclic, Test Db, first cycle . 16
5.10.5 Cold. 16
5.10.6 Low air pressure . 16
5.10.7 Damp heat, cyclic, Test Db, remaining cycles . 16
5.11 Damp heat, steady state . 17
5.11.1 General . 17
5.11.2 Initial inspections . 17
5.11.3 Test conditions
...