|
SLOVENSKI STANDARD
01-september-2018
Okoljsko preskušanje - 2-10. del: Preskusi - Preskus J in navodilo: razvoj modela -
Dopolnilo A1 (IEC 60068-2-10:2005/A1:2018)
Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth (IEC 60068
-2-10:2005/A1:2018)
Umgebungseinflüsse - Teil 2-10: Prüfverfahren - Prüfung J und Leitfaden:
Schimmelwachstum (IEC 60068-2-10:2005/A1:2018)
Essais d'environnement - Partie 2-10: Essais - Essai J et guide: Moisissures (IEC 60068-
2-10:2005/A1:2018)
Ta slovenski standard je istoveten z: EN 60068-2-10:2005/A1:2018
ICS:
19.040 Preskušanje v zvezi z Environmental testing
okoljem
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 60068-2-10:2005/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2018
ICS 19.040
English Version
Environmental testing - Part 2-10: Tests - Test J and guidance:
Mould growth
(IEC 60068-2-10:2005/A1:2018)
Essais d'environnement - Partie 2-10: Essais - Essai J et Umgebungseinflüsse - Teil 2-10: Prüfverfahren - Prüfung J
guide: Moisissures und Leitfaden: Schimmelwachstum
(IEC 60068-2-10:2005/A1:2018) (IEC 60068-2-10:2005/A1:2018)
This amendment A1 modifies the European Standard EN 60068-2-10:2005; it was approved by CENELEC on 2018-05-30. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60068-2-10:2005/A1:2018 E
European foreword
The text of document 104/740/CDV, future edition 6 of IEC 60068-2-10:2005/A1, prepared by
IEC/TC 104 "Environmental conditions, classification and methods of test" was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN 60068-2-10:2005/A1:2018.
The following dates are fixed:
• latest date by which the document has (dop) 2019-02-28
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2021-05-30
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60068-2-10:2005/A1:2018 was approved by CENELEC as
a European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60068-1:2013 NOTE Harmonized as EN 60068-1:2014 (not modified).
IEC 60068-2-10
Edition 6.0 2018-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
BA SIC SAFETY PUBLICATION
PU BLICATION FONDAMENTALE DE SÉCURITÉ
AMENDMENT 1
AMENDEMENT 1
Environmental testing –
Part 2-10: Tests – Test J and guidance: Mould growth
Essais d’environnement –
Partie 2-10: Essais – Essai J et guide: Moisissures
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 19.040 ISBN 978-2-8322-5513-1
– 2 – IEC 60068-2-10:2005/AMD1:2018
© IEC 2018
FOREWORD
This amendment has been prepared by IEC technical committee 104: Environmental
conditions, classification and methods of test.
The text of this amendment is based on the following documents:
CDV Report on voting
104/740/CDV 104/790/RVC
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC website under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
_____________
3 General description
Replace the existing Clause 3 with the following new Clause 3:
3 General description
3.1 Background
Under certain climatic and environmental conditions, micro-organisms may settle on and
colonize the surface of electrotechnical equipment. Their presence or their metabolic products
may not only damage the equipment itself, but may also affect the equipment’s operability and
serviceability. The actions of micro-organisms on equipment are influenced by two different
processes: direct action in which the deterioration of material serve as a nutritive substance
for the growth of the
...