|
SLOVENSKI STANDARD
01-september-2018
Preskusne metode za kovinske komunikacijske kable - 4-7. del: Elektromagnetna
združljivost (EMC) - Preskusna metoda za meritve prehodne impedance ZT in
zaslonskega slabljenja aS ali sklopnega slabljenja aC konektorjev in sestavov do
in nad 3 GHz - Metoda "cev v cevi" - Dopolnilo A1 (IEC 62153-4-7:2015/A1:2018)
Metallic communication cable test methods - Part 4-7: Electromagnetic compatibility
(EMC) - Test method for measuring of transfer impedance ZT and screening attenuation
as or coupling attenuation aC of connectors and assemblies up to and above 3 GHz -
Triaxial tube in tube method (IEC 62153-4-7:2015/A1:2018)
Prüfverfahren für metallische Kommunikationskabel - Teil 4-7: Geschirmtes
Prüfverfahren zur Messung von Kopplungswiderstand ZT und von Schirm as- oder
Kopplungsdämpfung ac von HF-Steckverbindern und konfektionierten Kabeln bis zu und
über 3 GHz - Rohr-im-Rohr-Verfahren (IEC 62153-4-7:2015/A1:2018)
Méthodes d'essai des câbles métalliques de communication - Partie 4-7: Compatibilité
électromagnétique (CEM) - Méthode d'essai pour mesurer l'impédance de transfert ZT et
l'affaiblissement d'écrantage as ou l'affaiblissement de couplage aC des connecteurs et
des cordons jusqu'à 3 GHz et au-dessus - Méthode triaxiale en tubes concentriques (IEC
62153-4-7:2015/A1:2018)
Ta slovenski standard je istoveten z: EN 62153-4-7:2016/A1:2018
ICS:
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 62153-4-7:2016/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2018
ICS 33.100.10; 33.120.10
English Version
Metallic communication cable test methods -
Part 4-7: Electromagnetic compatibility (EMC) - Test method for
measuring of transfer impedance Z and screening attenuation
T
a or coupling attenuation a of connectors and assemblies up to
s C
and above 3 GHz - Triaxial tube in tube method
(IEC 62153-4-7:2015/A1:2018)
Méthodes d'essai des câbles métalliques de communication Prüfverfahren für metallische Kommunikationskabel -
- Partie 4-7: Compatibilité électromagnétique (CEM) - Teil 4-7: Geschirmtes Prüfverfahren zur Messung von
Méthode d'essai pour mesurer l'impédance de transfert Z Kopplungswiderstand Z und von Schirm a - oder
T T s
et l'affaiblissement d'écrantage a ou l'affaiblissement de Kopplungsdämpfung a von HF-Steckverbindern und
s c
couplage a des connecteurs et des cordons jusqu'à 3 GHz konfektionierten Kabeln bis zu und über 3 GHz - Rohr-im-
C
et au-dessus - Méthode triaxiale en tubes concentriques Rohr-Verfahren
(IEC 62153-4-7:2015/A1:2018) (IEC 62153-4-7:2015/A1:2018)
This amendment A1 modifies the European Standard EN 62153-4-7:2016; it was approved by CENELEC on 2018-06-13. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62153-4-7:2016/A1:2018 E
European foreword
The text of document 46/679/FDIS, future IEC 62153-4-7:2015/A1, prepared by IEC/TC 46 "Cables,
wires, waveguides, R.F. connectors, R.F. and microwave passive components and accessories" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be (dop) 2019-03-13
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2021-06-13
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62153-4-7:2015/A1:2018 was approved by CENELEC as a
European Standard without any modification.
IEC 62153-4-7
Edition 2.0 2018-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
A MENDMENT 1
AM ENDEMENT 1
Metallic communication cable test methods –
Part 4-7: Electromagnetic compatibility (EMC) – Test method for measuring of
transfer impedance Z and screening attenuation a or coupling attenuation a
T s C
of connectors and assemblies up to and above 3 GHz – Triaxial tube in tube
method
Méthodes d'essai des câbles métalliques de communication –
Parti
...