|
SLOVENSKI STANDARD
01-oktober-2021
Nadomešča:
SIST EN 61784-3-3:2018
Industrijska komunikacijska omrežja - Profili - 3-3. del: Funkciijska varnost
procesnih vodil - Dodatne specifikacije za CPF 3
Industrial communication networks - Profiles - Part 3-3: Functional safety fieldbuses -
Additional specifications for CPF 3
Industrielle Kommunikationsnetze - Profile - Teil 3-3: Funktional sichere Übertragung bei
Feldbussen - Zusätzliche Festlegungen für die Kommunikationsprofilfamilie 3
Réseaux de communication industriels - Profils - Partie 3-3: Bus de terrain de sécurité
fonctionnelle - Spécifications supplémentaires pour CPF 3
Ta slovenski standard je istoveten z: EN IEC 61784-3-3:2021
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.05 Večslojne uporabniške Multilayer applications
rešitve
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 61784-3-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2021
ICS 25.040.40; 35.100.05 Supersedes EN 61784-3-3:2017 and all of its
amendments and corrigenda (if any)
English Version
Industrial communication networks - Profiles - Part 3-3:
Functional safety fieldbuses - Additional specifications for CPF 3
(IEC 61784-3-3:2021)
Réseaux de communication industriels - Profils - Partie 3-3: Industrielle Kommunikationsnetze - Profile - Teil 3-3:
Bus de terrain de sécurité fonctionnelle - Spécifications Funktional sichere Übertragung bei Feldbussen -
supplémentaires pour CPF 3 Zusätzliche Festlegungen für die
(IEC 61784-3-3:2021) Kommunikationsprofilfamilie 3
(IEC 61784-3-3:2021)
This European Standard was approved by CENELEC on 2021-06-09. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61784-3-3:2021 E
European foreword
The text of document 65C/1083/FDIS, future edition 4 of IEC 61784-3-3, prepared by SC 65C
"Industrial networks" of IEC/TC 65 "Industrial-process measurement, control and automation" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61784-3-3:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-03-09
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-06-09
document have to be withdrawn
This document supersedes EN 61784-3-3:2017 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 61784-3-3:2021 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60870-5-1 NOTE Harmonized as EN 60870-5-1
IEC 61000-1-2 NOTE Harmonized as EN 61000-1-2
IEC 61131-6 NOTE Harmonized as EN 61131-6
IEC 61158 (series) NOTE Harmonized as EN 61158 (series)
IEC 61496 (series) NOTE Harmonized as EN IEC 61496 (series)
IEC 61508-1:2010 NOTE Harmonized as EN 61508-1:2010 (not modified)
IEC 61508-4:2010 NOTE Harmonized as EN 61508-4:2010 (not modified)
IEC 61508-5:2010 NOTE Harmonized as EN 61508-5:2010 (not modified)
IEC 61508-6:2010 NOTE Harmonized as EN 61508-6:2010 (not modified)
IEC 61158-3-3 NOTE Harmonized as EN 61158-3-3
IEC 61158-4-3 NOTE Harmonized as EN IEC 61158-4-3
IEC 61158-5 (series) NOTE Harmonized as EN 61158-5 (series)
IEC 61784-3 (series) NOTE Harmonized as EN 61784-3 (series)
IEC 61784-5 (series) NOTE Harmonized as EN IEC 61784-5 (series)
IEC 61800-5-2 NOTE Harmonized as EN 61800-5-2
IEC 61804 (series) NOTE Harmonized as EN IEC 61804 (series)
ISO 10218-1 NOTE Harmonized as EN ISO 10218-1
ISO 13849 (series) NOTE Harmonized as EN ISO 13849 (series)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60204-1 - Safety of machinery - Electrical equipment of EN 60204-1 -
machines - Part 1: General requirements
IEC 61000-6-7 - Electromagnetic compatibility (EMC) - Part 6-7: EN 61000-6-7 -
Generic standards - Immunity requirements for
equipment intended to perform functions in a
safety-related system (functional safety) in
industrial locations
IEC 61010-2-201 2017 Safety requirements for electrical equipment EN IEC 61010-2-201 2018
for measurement, control, and laboratory use -
Part 2-201: Particular requirements for control
equipment
IEC 61158-2 - Industrial communication networks - Fieldbus EN 61158-2 -
specifications - Part 2: Physical layer
specification and service definition
IEC 61158-5-3 - Industrial communication networks - Fieldbus EN 61158-5-3 -
specifications - Part 5-3: Application layer
service definition - Type 3 elements
IEC 61158-5-10 - Industrial communication networks - Fieldbus EN IEC 61158-5-10 -
specifications - Part 5-10: Application layer
service definition - Type 10 elements
IEC 61158-6-3 - Industrial communication networks - Fieldbus EN IEC 61158-6-3 -
specifications - Part 6-3: Application layer
protocol specification - Type 3 elements
IEC 61158-6-10 - Industrial communication networks - Fieldbus EN IEC 61158-6-10 -
specifications - Part 6-10: Application layer
protocol specification - Type 10 elements
IEC 61326-3-1 - Electrical equipment for measurement, control EN 61326-3-1 -
and laboratory use - EMC requirements - Part
3-1: Immunity requirements for safety-related
systems and for equipment intended to
perform safety-related functions (functional
safety) – General industrial applications
Publication Year Title EN/HD Year
IEC 61326-3-2 - Electrical equipment for measurement, control EN IEC 61326-3-2 -
and laboratory use - EMC requirements - Part
3-2: Immunity requirements for safety-related
systems and for equipment intended to
perform safety-related functions (functional
safety) - Industrial applications with specified
electromagnetic environment
IEC 61508 series Functional safety of EN 61508 series
electrical/electronic/programmable electronic
safety-related systems
IEC 61508-2 - Functional safety of EN 61508-2 -
electrical/electronic/programmable electronic
safety-related systems - Part 2: Requirements
for electrical/electronic/programmable
electronic safety-related systems (see
Functional Safety and IEC 61508
IEC 61511 series Functional safety - Safety instrumented EN 61511 series
systems for the process industry sector
IEC 61784-1 - Industrial communication networks - Profiles EN IEC 61784-1 -
Part 1: Fieldbus profiles
IEC 61784-2 - Industrial communication networks - Profiles - EN IEC 61784-2 -
Part 2: Additional fieldbus profiles for real-time
networks based on ISO/IEC/IEEE 8802-3
IEC 61784-3 2021 Industrial communication networks - Profiles - EN IEC 61784-3 2021
Part 3: Functional safety fieldbuses - General
rules and profile definitions
IEC 61784-5-3 - Industrial communication networks – Profiles – EN IEC 61784-5-3 -
Part 5-3: Installation of fieldbuses – Installation
profiles for CPF 3
IEC 61918 2018 Industrial communication networks - EN IEC 61918 2018
Installation of communication networks in
industrial premises
IEC 62061 - Safety of machinery - Functional safety of EN IEC 62061 -
safety-related control systems
IEC 62280 2014 Railway applications - Communication, - -
signalling and processing systems - Safety
related communication in transmission
systems
IEC 62443 series Security for industrial automation and control EN IEC 62443 series
systems
ISO 13849-1 2015 Safety of machinery - Safety-related parts of EN ISO 13849-1 2015
control systems - Part 1: General principles for
design
ISO 13849-2 2012 Safety of machinery - Safety-related parts of EN ISO 13849-2 2012
control systems - Part 2: Validation
IEC 61784-3-3
Edition 4.0 2021-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Industrial communication networks – Profiles –
Part 3-3: Functional safety fieldbuses – Additional specifications for CPF 3
Réseaux de communication industriels – Profils –
Partie 3-3: Bus de terrain de sécurité fonctionnelle – Spécifications
supplémentaires pour CPF 3
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.040.40; 35.100.05 ISBN 978-2-8322-9749-0
– 2 – IEC 61784-3-3:2021 IEC 2021
CONTENTS
FOREWORD . 9
0 Introduction . 11
0.1 General . 11
0.2 Patent declaration . 12
1 Scope . 14
2 Normative references . 14
3 Terms, definitions, symbols, abbreviated terms and conventions . 16
3.1 Terms and definitions . 16
3.1.1 Common terms and definitions . 16
3.1.2 CPF 3: Additional terms and definitions . 22
3.2 Symbols and abbreviated terms . 27
3.2.1 Common symbols and abbreviated terms . 27
3.2.2 CPF 3: Additional symbols and abbreviated terms . 28
3.3 Conventions . 29
4 Overview of FSCP 3/1 (PROFIsafe™). 29
5 General . 32
5.1 External documents providing specifications for the profile . 32
5.2 Safety functional requirements . 32
5.3 Safety measures . 32
5.4 Safety communication layer structure . 33
5.4.1 Principle of FSCP 3/1 safety communications . 33
5.4.2 CPF 3 communication structures . 35
5.5 Relationships with FAL (and DLL, PhL) . 37
5.5.1 Device model . 37
5.5.2 Application and communication relationships . 38
5.5.3 Data types . 38
6 Safety communication layer services .
...