EN IEC 63203-204-1:2021

Wearable electronic devices and technologies - Part 204-1: Electronic textile - Test method for assessing washing durability of leisurewear and sportswear e-textile systems

EN IEC 63203-204-1:2021

Name:EN IEC 63203-204-1:2021   Standard name:Wearable electronic devices and technologies - Part 204-1: Electronic textile - Test method for assessing washing durability of leisurewear and sportswear e-textile systems
Standard number:EN IEC 63203-204-1:2021   language:English language
Release Date:24-Jun-2021   technical committee:CLC/SR 124 - Wearable Electronic Devices and Technologies
Drafting committee:IEC/TC 124 - Wearable electronic devices and technologies   ICS number:59.080.01 - Textiles in general

SLOVENSKI STANDARD
01-oktober-2021
Nosljive elektronske naprave in tehnologije - 204-1. del: Elektronski tekstil -
Preskusna metoda za ocenjevanje pralne vzdržljivosti za e-tekstilne sisteme za
prostočasna in športna oblačila (IEC 63203-204-1:2021)
Wearable electronic devices and technologies - Part 204-1: Electronic textile - Test
method for assessing washing durability of leisurewear and sportswear e-textile systems
(IEC 63203-204-1:2021)
Tragbare elektronische Geräte und Technologien - Teil 204-1: Elektronische Textilien -
Prüfverfahren zur Beurteilung der Waschbeständigkeit von E-Textiliensystemen der
Freizeit- und Sportbekleidung (IEC 63203-204-1:2021)
Technologies et dispositifs électroniques prêts-à-porter - Partie 204-1 : Textile
électronique - Méthode d'essai pour l’évaluation de la durabilité au lavage des systèmes
e-textiles des vêtements de sport et de loisirs (IEC 63203-204-1:2021)
Ta slovenski standard je istoveten z: EN IEC 63203-204-1:2021
ICS:
59.080.80 Inteligentne tekstilije Smart textiles
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 63203-204-1

NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2021
ICS 59.080.01; 59.080.80
English Version
Wearable electronic devices and technologies - Part 204-1:
Electronic textile - Test method for assessing washing durability
of leisurewear and sportswear e-textile systems
(IEC 63203-204-1:2021)
Technologies et dispositifs électroniques prêts-à-porter - Tragbare elektronische Geräte und Technologien -
Partie 204-1 : Textile électronique - Méthode d'essai pour Teil 204-1: Elektronische Textilien - Prüfverfahren zur
l'évaluation de la durabilité au lavage des systèmes e- Beurteilung der Waschbeständigkeit von E-
textiles des vêtements de sport et de loisirs Textiliensystemen der Freizeit- und Sportbekleidung
(IEC 63203-204-1:2021) (IEC 63203-204-1:2021)
This European Standard was approved by CENELEC on 2021-06-15. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 63203-204-1:2021 E

European foreword
The text of document 124/139/FDIS, future edition 1 of IEC 63203-204-1, prepared by IEC/TC 124
"Wearable electronic devices and technologies" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 63203-204-1:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-03-15
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-06-15
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 63203-204-1:2021 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
ISO 139 - Textiles - Standard atmospheres for EN ISO 139 -
conditioning and testing
ISO 6330 - Textiles - Domestic washing and drying EN ISO 6330 -
procedures for textile testing
- - Textiles and textile products - Electrically EN 16812 2016
conductive textiles - Determination of the
linear electrical resistance of conductive
tracks
IEC 63203-204-1
Edition 1.0 2021-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Wearable electronic devices and technologies –

Part 204-1: Electronic textile – Test method for assessing washing durability of

leisurewear and sportswear e-textile systems

Technologies et dispositifs électroniques prêts-à-porter –

Partie 204-1: Textile électronique – Méthode d'essai pour l’évaluation de la

durabilité au lavage des systèmes e-textiles des vêtements de sport et de loisirs

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 59.080.01; 59.080.80 ISBN 978-2-8322-9779-7

– 2 – IEC 63203-204-1:2021 © IEC 2021
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Test method – General . 6
4.1 Checklist before washability test . 6
4.2 Washability test conditions . 6
4.3 Check of operation before/after washing test . 6
5 Test procedure . 6
5.1 Pretreatment . 6
5.2 Washing. 6
5.3 Test after washing and drying . 7
6 Test report . 7
Annex A (informative) Result of studies – Resistance measurement . 8
A.1 Test procedure . 8
A.2 Test results . 8

Figure 1 – Flow chart of test procedure . 7
Figure A.1 – Test results of resistance measurement after laundry test . 9

Table A.1 – Test conditions and results . 8

IEC 63203-204-1:2021 © IEC 2021 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
WEARABLE ELECTRONIC DEVICES AND TECHNOLOGIES –

Part 204-1: Electronic textile – Test method for assessing washing
durability of leisurewear and sportswear e-textile systems

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 63203-204-1 has been prepared by IEC technical committee 124:
Wearable electronic devices and technologies.
The text of this International Standard is based on the following documents:
FDIS Report on voting
124/139/FDIS 124/145/RVD
Full information on the voting for the approval of this International Standard can be found in the
report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts in the IEC 63203 series, published under the general title Wearable electronic
devices and technologies, can be found on the IEC website.

– 4 – IEC 63203-204-1:2021 © IEC 2021
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates that it
contains colours which are considered to be useful for the correct understanding of its
contents. Users should therefore print this document using a colour printer.

IEC 63203-204-1:2021 © IEC 2021 – 5 –
WEARABLE ELECTRONIC DEVICES AND TECHNOLOGIES –

Part 204-1: Electronic textile – Test method f
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27