|
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sistemi z neprekinjenim napajanjem - 2. del: Zahteve za elektromagnetno združljivost (EMC) (IEC 62040-2:2016)Unterbrechungsfreie Stromversorgungssysteme (USV) - Teil 2: Anforderungen an die elektromagnetische Verträglichkeit (EMV) (IEC 62040-2:2016)Alimentations sans interruption (ASI) - Partie 2 : exigences pour la compatibilité électromagnétique (CEM) (IEC 62040-2:2016)Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements (IEC 62040-2:2016)33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general29.200QDSDMDQMHRectifiers. Convertors. Stabilized power supplyICS:Ta slovenski standard je istoveten z:EN IEC 62040-2:2018SIST EN 62040-2:2018en01-december-2018SIST EN 62040-2:2018SLOVENSKI
STANDARDSIST EN 62040-2:20061DGRPHãþD
SIST EN 62040-2:2018
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN IEC 62040-2
September 2018 ICS 33.100.10; 17.220; 29.200
Supersedes
EN 62040-2:2006
English Version
Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements (IEC 62040-2:2016)
Alimentations sans interruption (ASI) - Partie 2: Exigences pour la compatibilité électromagnétique (CEM) (IEC 62040-2:2016)
Unterbrechungsfreie Stromversorgungssysteme (USV) - Teil 2: Anforderungen an die elektromagnetische Verträglichkeit (EMV) (IEC 62040-2:2016) This European Standard was approved by CENELEC on 2018-07-09. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23,
B-1040 Brussels © 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62040-2:2018 E SIST EN 62040-2:2018
This document supersedes EN 62040-2:2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association. Endorsement notice The text of the International Standard IEC 62040-2:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61000-4 series NOTE Harmonized as EN 61000-4 series. IEC 61204 series NOTE Harmonized as EN 61204 series. CISPR 15:2013 NOTE Harmonized as EN 55015:2013 (not modified). CISPR 15:2013/A1:2015 NOTE Harmonized as EN 55015:2013/A1:2015 (not modified).
SIST EN 62040-2:2018
Normative references to international publications with their corresponding European publications The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1
Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
NOTE 2
Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu.
Publication Year Title EN/HD Year IEC 61000-2-2 2002
Electromagnetic compatibility (EMC) -
Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems EN 61000-2-2 2002
IEC 61000-3-2 2014
Electromagnetic compatibility (EMC) -
Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase) EN 61000-3-2 2014
IEC 61000-3-12 2011
Electromagnetic compatibility (EMC) -
Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and ≤ 75 A per phase EN 61000-3-12 2011
IEC 61000-4-2 2008
Electromagnetic compatibility (EMC) -
Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test EN 61000-4-2 2009
IEC 61000-4-3 2006
Electromagnetic compatibility (EMC) -
Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test EN 61000-4-3 2006
IEC 61000-4-4 2012
Electromagnetic compatibility (EMC) -
Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test EN 61000-4-4 2012
IEC 61000-4-5 2014
Electromagnetic compatibility (EMC) -
Part 4-5: Testing and measurement techniques - Surge immunity test EN 61000-4-5 2014
IEC 61000-4-6 2013
Electromagnetic compatibility (EMC) -
Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields EN 61000-4-6 2014
SIST EN 62040-2:2018
Electromagnetic compatibility (EMC) -
Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test EN 61000-4-8 2010
IEC 62040-3 2011
Uninterruptible power systems (UPS) -
Part 3: Method of specifying the performance and test requirements EN 62040-3 2011
CISPR 11 (mod) 2015
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement EN 55011 2016
CISPR 16-1-1 2015
Specification for radio disturbance and immunity measuring apparatus and methods -
Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus - - CISPR 16-1-2 2014
Specification for radio disturbance and immunity measuring apparatus and methods -
Part 1-2: Radio disturbance and immunity measuring apparatus - Coupling devices for conducted disturbance measurements EN 55016-1-2 2014
CISPR 16-1-4 2010
Specification for radio disturbance and immunity measuring apparatus and methods -
Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements EN 55016-1-4 2010
+A1 2012
+A1 2012
CISPR 16-2-1 2014
Specification for radio disturbance and immunity measuring apparatus and methods -
Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements EN 55016-2-1 2014
CISPR 16-2-3 2010
Specification for radio disturbance and immunity measuring apparatus and methods -
Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements EN 55016-2-3 +AC 2010 2013 +A1 2010
+A1 2010 +A2 2014
+A2 2014 CISPR 22 (mod) 2008
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement EN 55022 +AC 2010
SIST EN 62040-2:2018
IEC 62040-2 Edition 3.0 2016-11 INTERNATIONAL STANDARD NORME INTERNATIONALE Uninterruptible power systems (UPS) –
Part 2: Electromagnetic compatibility (EMC) requirements
Alimentations sans interruption (ASI) –
Partie 2: Exigences pour la compatibilité électromagnétique (CEM)
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE
ICS 17.220; 29.200; 33.100.10
ISBN 978-2-8322-3753-3
IEC 62040-2:2016/ISH1:2018 IEC 2018 – 1 –
ICS 17.220; 29.200; 33.100.10
INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
IEC 62040-2 Edition 3.0
2016-11
UNINTERRUPTIBLE POWER SYSTEMS (UPS) –
Part 2: Electromagnetic compatibility (EMC) requirements
INTERPRETATION SHEET 1
This interpretation sheet has been prepared by subcommittee 22H: Uninterruptible power systems (UPS), of IEC technical committee 22: Power electronic systems and equipment. The text of this interpretation sheet is based on the following documents: FDIS Report on voting 22H/232/FDIS 22H/236/RVD
Full information on the voting for the approval of this interpretation sheet can be found in the report on voting indicated in the above table.
___________
Interpretation of 5.3.2.4, Limits at the network ports Introduction Sub-clause 5.3.2.4 states that the network port limits applicable to UPS of category C1, C2 and C3 are located in Table 1, Table 2 and Annex C. It was not clear whether 5.3.2.4 applies to network ports that originate and terminate within the enclosure port of the UPS (i.e. to network ports connected exclusively to circuits or devices forming an integral part of the UPS). Interpretation The network port limits in Table 1, Table 2 and Annex C apply only to network ports for which connection to circuits or devices external to the enclosure port of the UPS is allowed. This includes, without limitation, connection to PSTN, ISDN, xDSL and Ethernet networks.
The limits in Table 1, Table 2 and Annex C do not apply to network ports that originate and terminate within the enclosure port of the UPS (i.e. to network ports connected exclusively to circuits or devices forming an integral part of the UPS).
IEC 62040-2:2016-11/ISH1:2018-06(en-fr)
SIST EN 62040-2:2018
SIST EN 62040-2:2018
– 2 – IEC 62040-2:2016 © IEC 2016 CONTENTS FOREWORD . 5 1 Scope . 7 2 Normative references . 7 3 Terms, definitions and abbreviated terms . 9 3.1 Terms and definitions . 9 3.2 Abbreviated terms . 11 4 UPS categories . 11 4.1 Category C1 UPS. 11 4.2 Category C2 UPS. 11 4.3 Category C3 UPS. 11 4.4 Category C4 UPS. 12 4.5 Categories and environment . 12 4.6 Documentation . 12 5 Emission. 12 5.1 General . 12 5.2 General test requirements . 13 5.3 Measurement requirements . 13 5.3.1 General . 13 5.3.2 Conducted emission . 13 5.3.3 Radiated emission . 15 6 Immunity. 16 6.1 General . 16 6.2 General requirements and performance criteria . 16 6.3 Basic immunity requirements . 17 6.3.1 General . 17 6.3.2 Category C1 UPS . 17 6.3.3 Category C2 and C3 UPS . 18 6.4 Immunity to voltage dips, short interruptions and voltage variations . 19 Annex A (normative)
Electromagnetic emission – Test methods . 20 A.1 General . 20 A.2 Measuring equipment .
...