|
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Nizkonapetostni stikalni napajalniki z enosmernim (DC) izhodom - 3. del: Elektromagnetna združljivost (EMC) (IEC 61204-3:2016)Stromversorgungsgeräte für Niederspannung mit Gleichstromausgang - Teil 3: Elektromagnetische Verträglichkeit (EMV) (IEC 61204-3:2016)Alimentations basse tension, sortie continue - Partie 3 : Compatibilité électromagnétique (CEM) (IEC 61204-3:2016)Low voltage power supplies, d.c. output - Part 3: Electromagnetic compatibility (EMC) (IEC 61204-3:2016)33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general29.200QDSDMDQMHRectifiers. Convertors. Stabilized power supplyICS:Ta slovenski standard je istoveten z:EN IEC 61204-3:2018SIST EN 61204-3:2018en01-december-2018SIST EN 61204-3:2018SLOVENSKI
STANDARDSIST EN 61204-3:20021DGRPHãþD
SIST EN 61204-3:2018
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN IEC 61204-3
September 2018 ICS 29.200; 33.100
Supersedes
EN 61204-3:2000
English Version
Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC) (IEC 61204-3:2016)
Alimentations à découpage basse tension - Partie 3: Compatibilité électromagnétique (CEM) (IEC 61204-3:2016)
Stromversorgungsgeräte für Niederspannung mit Gleichstromausgang - Teil 3: Elektromagnetische Verträglichkeit (EMV) (IEC 61204-3:2016) This European Standard was approved by CENELEC on 2018-07-09. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23,
B-1040 Brussels © 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61204-3:2018 E SIST EN 61204-3:2018
This document supersedes EN 61204-3:2000. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association. Endorsement notice The text of the International Standard IEC 61204-3:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60364-4-41 NOTE Harmonized as HD 60364-4-41. IEC 60664-1 NOTE Harmonized as EN 60664-1. IEC 61000-1-2 NOTE Harmonized as EN 61000-1-2. IEC 61000-3-11 NOTE Harmonized as EN 61000-3-11. IEC 61558-1 NOTE Harmonized as EN 61558-1. IEC 62040-1 NOTE Harmonized as EN 62040-1. ISO/IEC 17025 NOTE Harmonized as EN ISO/IEC 17025. CISPR 14-1:2005 NOTE Harmonized as EN 55014-1:2006 (not modified). CISPR 15 NOTE Harmonized as EN 55015.
SIST EN 61204-3:2018
Normative references to international publications with their corresponding European publications The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1
Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
NOTE 2
Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu.
Publication Year Title EN/HD Year IEC 60050-121 -
International Electrotechnical Vocabulary (IEV) -- Part 121: Electromagnetism - -
IEC 60050-151 -
International Electrotechnical Vocabulary - Part 151: Electrical and magnetic devices - -
IEC 60050-161 -
International Electrotechnical Vocabulary (IEV) -- Chapter 161: Electromagnetic compatibility - -
IEC 60050-551 -
International Electrotechnical Vocabulary (IEV) -- Part 551: Power electronics - -
IEC 60065 -
Audio, video and similar electronic apparatus - Safety requirements EN 60065 -
IEC 60146-1-1 -
Semiconductor convertors - General requirements and line commutated convertors -- Part 1-1: Specifications of basic requirements - -
IEC 60601-1 -
Medical electrical equipment - Part 1: General requirements for basic safety and essential performance EN 60601-1 -
IEC 60950-1 -
Information technology equipment - Safety - Part 1: General requirements EN 60950-1 -
IEC 61000-3-2 2014
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current - 16 A per phase) EN 61000-3-2 2014
IEC 61000-3-3 -
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current - 16 A per phase and not subject to conditional connection EN 61000-3-3 -
SIST EN 61204-3:2018
Electromagnetic compatibility (EMC) -- Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and <= 75 A per phase EN 61000-3-12 -
IEC 61000-4-2 -
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test EN 61000-4-2 -
IEC 61000-4-3 -
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test - -
IEC 61000-4-4 -
Electromagnetic compatibility (EMC) -- Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test EN 61000-4-4 -
IEC 61000-4-5 -
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test EN 61000-4-5 -
IEC 61000-4-6 -
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields EN 61000-4-6 -
IEC 61000-4-8 -
Electromagnetic compatibility (EMC) -- Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test EN 61000-4-8 -
IEC 61000-4-11 -
Electromagnetic compatibility (EMC) -- Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests EN 61000-4-11 -
IEC 61000-6-1 -
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments EN 61000-6-1 -
IEC 61000-6-2 -
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments EN 61000-6-2 -
IEC 61000-6-3 -
Electromagnetic compatibility (EMC) -- Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments EN 61000-6-3 -
IEC 61000-6-4 -
Electromagnetic compatibility (EMC) – Part 6-4: Generic standards – Emission standard for industrial environments EN IEC 61000-6-4 -
IEC 61010-1 -
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements EN 61010-1 -
IEC 62368-1 -
Audio/video, information and communication technology equipment - Part 1: Safety requirements EN 62368-1 -
SIST EN 61204-3:2018
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement EN 55011 -
CISPR 16-1 series
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus EN 55016-1 series
CISPR 16-1-2 2014
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Coupling devices for conducted disturbance measurements EN 55016-1-2 2014
CISPR 16-1-3 -
Specification for radio disturbance and immunity measuring apparatus and methods -- Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power EN 55016-1-3 -
CISPR 16-2-1 2014
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements EN 55016-2-1 2014
CISPR 16-2-2 -
Specification for radio disturbance and immunity measuring apparatus and methods -- Part 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power EN 55016-2-2 -
CISPR 16-2-3 -
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements EN 55016-2-3 -
SIST EN 61204-3:2018
SIST EN 61204-3:2018
IEC 61204-3 Edition 3.0 2016-10 INTERNATIONAL STANDARD NORME INTERNATIONALE Low-voltage switch mode power supplies –
Part 3: Electromagnetic compatibility (EMC)
Alimentations à découpage basse tension –
Partie 3: Compatibilité électromagnétique (CEM)
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE
ICS 29.200; 33.100
ISBN 978-2-8322-3689-5
– 2 – IEC 61204-3:2016 © IEC 2016 CONTENTS FOREWORD . 4 1 Scope and object . 6 1.1 Scope . 6 1.1.1 Equipment covered by this document . 6 1.1.2 Additional requirements . 6 1.1.3 Exclusions . 6 1.1.4 Types of power supply . 7 1.1.5 Configurations and combinations of power supplies . 7 1.2 Object . 8 2 Normative references . 8 3 Terms and definitions . 10 4 Applicability of tests to different PSU technologies . 13 5 General requirements and test conditions . 14 5.1 General requirements . 14 5.2 Test conditions . 14 6 Emission requirements . 14 6.1 General . 14 6.2 Low frequency phenomena (f
≤ 9 kHz; AC input only) . 14 6.2.1 Commutation notches . 14 6.2.2 Current harmonics and interharmonics . 14 6.2.3 Voltage fluctuations and flicker . 15 6.3 High frequency conducted emission . 15 6.3.1 General . 15 6.3.2 High frequency conducted emission for input power ports . 15 6.3.3 High frequency conducted emission for DC output power ports . 16 6.4 High frequency radiated emission . 16 6.4.1 General . 16 6.4.2 Radiated disturbance measurements . 16 6.4.3 Measurement of disturbance power . 16 6.4.4 Restrictions for the application of interference power measurement . 17 7 Immunity requirements .
...