|
SLOVENSKI STANDARD
01-december-2018
Meritve in krmiljenje v industrijskih procesih - Strukture podatkov in elementi v
katalogih procesne opreme - 92. del: Seznam lastnosti merilne opreme za
elektronsko izmenjavo podatkov - Vidik seznama lastnosti (IEC 61987-92:2018)
Industrial-process measurement and control - Data structures and elements in process
equipment catalogues - Part 92: Lists of properties (LOP) of measuring equipment for
electronic data exchange - Aspect LOPs (IEC 61987-92:2018)
Industrielle Leittechnik - Datenstrukturen und -elemente in Katalogen der
Prozessleittechnik - Teil 92: Merkmalleisten (ML) für Messeinrichtungen für den
elektronischen Datenaustausch - Merkmalleisten für bestimmte Aspekte (IEC 61987-
92:2018)
Mesure et commande dans les processus industriels - Structures de données et
éléments dans les catalogues d'équipements de processus - Partie 92: Listes de
propriétés (LOP) des équipements de mesure pour l'échange électronique de données -
LOP d'aspect (IEC 61987-92:2018)
Ta slovenski standard je istoveten z: EN IEC 61987-92:2018
ICS:
01.110 7HKQLþQDGRNXPHQWDFLMD]D Technical product
L]GHONH documentation
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 61987-92
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2018
ICS 25.040.40, 35.040.50
English Version
Industrial-process measurement and control - Data structures
and elements in process equipment catalogues - Part 92: Lists of
properties (LOP) of measuring equipment for electronic data
exchange - Aspect LOPs
(IEC 61987-92:2018)
Mesure et commande dans les processus industriels - Industrielle Leittechnik - Datenstrukturen und -elemente in
Structures de données et éléments dans les catalogues Katalogen der Prozessleittechnik - Teil 92: Merkmalleisten
d'équipements de processus - Partie 92: Listes de (ML) für Messeinrichtungen für den elektronischen
propriétés (LOP) des équipements de mesure pour Datenaustausch - Merkmalleisten für bestimmte Aspekte
l'échange électronique de données - LOP d'aspect (IEC 61987-92:2018)
(IEC 61987-92:2018)
This European Standard was approved by CENELEC on 2018-07-10. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61987-92:2018 E
European foreword
The text of document 65E/587/FDIS, future edition 1 of IEC 61987-92, prepared by SC 65E "Devices
and integration in enterprise systems" of IEC/TC 65 "Industrial-process measurement, control and
automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2019-04-10
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2021-07-10
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61987-92:2018 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60947-5-6:1999 NOTE Harmonized as EN 60947-5-6:2000 (not modified)
IEC 61298-1:2008 NOTE Harmonized as EN 61298-1:2008 (not modified)
IEC 61298-2:2008 NOTE Harmonized as EN 61298-2:2008 (not modified)
IEC 61298-3:2008 NOTE Harmonized as EN 61298-3:2008 (not modified)
IEC 61360-1 NOTE Harmonized as EN 61360-1
IEC 61360-2 NOTE Harmonized as EN 61360-2
IEC 61784-1 NOTE Harmonized as EN 61784-1
IEC 61784-2 NOTE Harmonized as EN 61784-2
IEC 61804-2 NOTE Harmonized as EN IEC 61804-2
IEC 61987 series NOTE Harmonized as EN 61987 series
IEC 61987-1 NOTE Harmonized as EN 61987-1
IEC 61987-16 NOTE Harmonized as EN 61987-16
IEC 62264-1:2013 NOTE Harmonized as EN 62264-1:2013 (not modified)
IEC 62424:2016 NOTE Harmonized as EN 62424:2016 (not modified)
IEC 62569-1:2017 NOTE Harmonized as EN 62569-1:2017 (not modified)
ISO 5167-2:2003 NOTE Harmonized as EN ISO 5167-2:2003 (not modified)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61355-1 2008 Classification and designation of EN 61355-1 2008
documents for plants, systems and
equipment -- Part 1: Rules and
classification tables
IEC 61360 series Standard data element types with EN 61360 series
associated classification scheme
IEC 61987-10 2009 Industrial-process measurement and EN 61987-10 2009
control - Data structures and elements in
process equipment catalogues - Part 10:
Lists of Properties (LOPs) for Industrial-
Process Measurement and Control for
Electronic Data Exchange - Fundamentals
- - + AC 2011
IEC 61987-11 2016 Industrial-process measurement and EN 61987-11 2017
control - Data structures and elements in
process equipment catalogues - Part 11:
List of properties (LOPs) of measuring
equipment for electronic data exchange -
Generic structures
IEC 61987-92
Edition 1.0 2018-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Industrial-process measurement and control – Data structures and elements in
process equipment catalogues –
Part 92: Lists of properties (LOP) of measuring equipment for electronic data
exchange – Aspect LOPs
Mesure et commande dans les processus industriels – Structures de données et
éléments dans les catalogues d’équipements de processus –
Partie 92: Listes de propriétés (LOP) des équipements de mesure pour l’échange
électronique de données – LOP d’aspect
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.040.40; 35.240.50 ISBN 978-2-8322-5761-6
– 2 – IEC 61987-92:2018 © IEC 2018
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 General . 8
4.1 Overview. 8
4.2 Depiction of aspect LOPs . 8
4.3 Aspect LOPs . 8
4.3.1 Administrative information . 8
4.3.2 Document information . 8
4.3.3 Project information . 8
4.3.4 Device information . 8
4.3.5 Device documents supplied . 9
4.3.6 Calibration and test results . 9
4.3.7 Output signal processing . 9
4.3.8 Packaging and transportation . 10
4.3.9 Storage. 10
4.3.10 Digital communication parameters . 10
4.3.11 Accessories and spare parts . 10
4.3.12 Installation . 10
4.3.13 Commissioning . 10
4.3.14 Decommissioning and disposal . 10
4.3.15 Maintenance/service and repair . 11
4.3.16 Special/further requirements . 11
4.4 Example of an aspect LOP . 11
4.5 Qualifiers . 13
Annex A (normative) Aspect lists of properties . 15
A.1 General . 15
A.2 Administrative information . 15
A.3 Document information . 15
A.4 Project information . 15
A.5 Device information . 15
A.6 Device documents supplied. 15
A.7 Calibration and test results . 16
A.8 Output signal processing . 16
A.9 Packaging and transportation . 16
A.10 Storage . 16
A.11 Digital communication parametrization . 16
A.12 Accessories and spare parts . 16
A.13 Installation . 16
A.14 Commissioning . 17
A.15 Decommissioning and disposal . 17
A.16 Maintenance/service and repair . 17
A.17 Special/further requirements . 17
SIST EN IEC 61987-92:20
...