|
SLOVENSKI STANDARD
01-julij-2023
Gospodinjski in podobni električni aparati - Varnost - 2-75. del: Posebne zahteve
za komercialne dozirne in prodajne avtomate (IEC 60335-2-75:2012)
Household and similar electrical appliances - Safety - Part 2-75: Particular requirements
for commercial dispensing appliances and vending machines (IEC 60335-2-75:2012)
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-75:
Besondere Anforderungen für Ausgabegeräte und Warenautomaten für den
gewerblichen Gebrauch (IEC 60335-2-75:2012)
Appareils électrodomestiques et analogues - Sécurité - Partie 2-75: Exigences
particulières pour les distributeurs commerciaux avec ou sans moyen de paiement (IEC
60335-2-75:2012)
Ta slovenski standard je istoveten z: EN IEC 60335-2-75:2023
ICS:
55.230 Razdelilni in prodajni Distribution and vending
avtomati machines
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN IEC 60335-2-75
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2023
ICS 55.230 Supersedes EN 60335-2-75:2004; EN 60335-2-
75:2004/A1:2005; EN 60335-2-75:2004/A11:2006; EN
60335-2-75:2004/A2:2008; EN 60335-2-
75:2004/A12:2010
English Version
Household and similar electrical appliances - Safety - Part 2-75:
Particular requirements for commercial dispensing appliances
and vending machines
(IEC 60335-2-75:2012)
Appareils électrodomestiques et analogues - Sécurité - Sicherheit elektrischer Geräte für den Hausgebrauch und
Partie 2-75: Exigences particulières pour les distributeurs ähnliche Zwecke - Teil 2-75: Besondere Anforderungen für
commerciaux avec ou sans moyen de paiement Ausgabegeräte und Warenautomaten für den gewerblichen
(IEC 60335-2-75:2012) Gebrauch
(IEC 60335-2-75:2012)
This European Standard was approved by CENELEC on 2020-11-16. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any
alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60335-2-75:2023 E
European foreword
This document (EN IEC 60335-2-75:2023) consists of the text of document IEC 60335-2-75:2012 edition
3.0 prepared by IEC/TC 61 "Safety of household and similar electrical appliances".
The following dates are fixed:
• latest date by which this document has to be (dop) 2023-11-05
implemented at national level by publication of an
identical national standard or by endorsement
• latest date by which the national standards (dow) 2026-05-05
conflicting with this document have to be withdrawn
This document supersedes EN 60335-2-75:2004+A1:2005+A11:2006+A2:2008+A12:2010 when
EN IEC 60335-2-75/A11:2023 is published.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document is read in conjunction with EN IEC 60335-2-75:2023/A1:2023,
This document has been prepared under a Standardization Request given to CENELEC by the European
Commission and the European Free Trade Association.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60335-2-75:2012 was approved by CENELEC as a European
Standard without any modification.
IEC 60335-2-75
Edition 3.0 2012-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Household and similar electrical appliances – Safety –
Part 2-75: Particular requirements for commercial dispensing appliances and
vending machines
Appareils électrodomestiques et analogues – Sécurité –
Partie 2-75: Exigences particulières pour les distributeurs commerciaux avec ou
sans moyen de paiement
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX V
ICS 55.230 ISBN 978-2-83220-513-6
– 2 – 60335-2-75 © IEC:2012
CONTENTS
FOREWORD . 3
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 8
3 Terms and definitions . 8
4 General requirement . 10
5 General conditions for the tests . 10
6 Classification . 11
7 Marking and instructions . 12
8 Protection against access to live parts . 14
9 Starting of motor-operated appliances . 14
10 Power input and current. 14
11 Heating. 14
12 Void . 15
13 Leakage current and electric strength at operating temperature . 15
14 Transient overvoltages . 16
15 Moisture resistance . 16
16 Leakage current and electric strength . 19
17 Overload protection of transformers and associated circuits . 19
18 Endurance . 19
19 Abnormal operation . 19
20 Stability and mechanical hazards. 21
21 Mechanical strength . 21
22 Construction . 21
23 Internal wiring . 24
24 Components . 25
25 Supply connection and external flexible cords . 26
26 Terminals for external conductors . 26
27 Provision for earthing . 26
28 Screws and connections . 26
29 Clearances, creepage distances and solid insulation . 27
30 Resistance to heat and fire . 27
31 Resistance to rusting . 27
32 Radiation, toxicity and similar hazards . 27
Annexes . 29
Annex AA (normative) Aging test for elastomeric parts . 29
Bibliography . 31
Figure 101 – Splash apparatus . 28
60335-2-75 © IEC:2012 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-75: Particular requirements for commercial
dispensing appliances and vending machines
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
This part of International Standard IEC 60335 has been prepared by IEC technical committee 61:
Safety of hous
...