|
SLOVENSKI STANDARD
01-oktober-2021
Valovod do koaksialnih adapterjev - 1. del: Splošna specifikacija - Splošne zahteve
in merilne metode (IEC 63249-1:2021)
Waveguide to coaxial adapters - Part 1: Generic specification - General requirements
and test methods (IEC 63249-1:2021)
Hohlleiter - Koax-Übergänge. Teil 1: Grundspezifikation - Allgemeine Anforderungen und
Prüfverfahren (IEC 63249-1:2021)
Adaptateurs coaxiaux pour guide d'ondes - Partie 1: Spécification générique - Exigences
générales et méthodes d'essai (IEC 63249-1:2021)
Ta slovenski standard je istoveten z: EN IEC 63249-1:2021
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 63249-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2021
ICS 33.120.99
English Version
Waveguide to coaxial adapters - Part 1: Generic specification -
General requirements and test methods
(IEC 63249-1:2021)
Adaptateurs coaxiaux pour guide d'ondes - Partie 1: Hohlleiter - Koax-Übergänge. Teil 1: Grundspezifikation -
Spécification générique - Exigences générales et méthodes Allgemeine Anforderungen und Prüfverfahren
d'essai (IEC 63249-1:2021)
(IEC 63249-1:2021)
This European Standard was approved by CENELEC on 2021-07-27. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 63249-1:2021 E
European foreword
The text of document 46F/511/CDV, future edition 1 of IEC 63249-1, prepared by SC 46F “RF and
microwave passive components” of IEC/TC 46 “Cables, wires, waveguides, RF connectors, RF and
microwave passive components and accessories” was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN IEC 63249-1:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022–04–27
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024–07–27
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 63249-1:2021 was approved by CENELEC as a European
Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60050-726 - International Electrotechnical Vocabulary - -
(IEV) – Part 726: Transmission lines and
waveguides
IEC 60068-1 - Environmental testing - Part 1: General EN 60068-1 -
and guidance
IEC 60068-2-6 - Environmental testing - Part 2–6: Tests - EN 60068-2-6 -
Test Fc: Vibration (sinusoidal)
IEC 60068-2-11 - Environmental testing - Part 2–11: Tests - EN IEC 60068-2-11 -
Test Ka: Salt mist
IEC 60068-2-14 - Environmental testing - Part 2–14: Tests - EN 60068-2-14 -
Test N: Change of temperature
IEC 60068-2-27 - Environmental testing - Part 2–27: Tests - EN 60068-2-27 -
Test Ea and guidance: Shock
IEC 60068-2-78 - Environmental testing - Part 2–78: Tests - EN 60068-2-78 -
Test Cab: Damp heat, steady-state
IEC 60153 series Hollow metallic waveguides EN 60153 series
IEC 60154 series Flanges for waveguides EN 60154 series
IEC 60529 - Degrees of protection provided by - -
enclosures (IP Code)
IEC 60617 - Graphical symbols for diagrams - -
IEC 61169 series Radio frequency connectors EN 61169 series
IEC 61169-1 - Radio frequency connectors - Part 1: EN 61169-1 -
Generic specification - General
requirements and measuring methods
IEC 61196 series Coaxial communication cables EN 61196 series
IEC 61726 - Cable assemblies, cables, connectors and EN 61726 -
passive microwave components -
Screening attenuation measurement by the
reverberation chamber method
IEC 63249-1
Edition 1.0 2021-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Waveguide to coaxial adapters –
Part 1: Generic specification – General requirements and test methods
Adaptateurs coaxiaux pour guide d'ondes –
Partie 1: Spécification générique – Exigences générales et méthodes d'essai
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.120.99 ISBN 978-2-8322-9889-3
– 2 – IEC 63249-1:2021 © IEC 2021
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Design and construction . 7
4.1 General . 7
4.2 Material and finishes . 8
4.3 Construction dimensions . 8
4.4 Protection of ends . 8
5 Standards ratings and characteristics . 8
6 Climatic categories . 8
7 IEC type designation . 9
8 Requirements and test methods . 9
8.1 General . 9
8.2 Visual inspection . 9
8.2.1 Requirements . 9
8.2.2 Inspection procedure . 10
8.3 Dimensions . 10
8.3.1 Dimensions of waveguide and flange . 10
8.3.2 Interface dimensions of connector . 10
8.3.3 Dimensions of cable . 10
8.3.4 Outline dimensions . 10
8.4 Electrical tests . 11
8.4.1 Voltage proof (applicable for disconnected adapter) . 11
8.4.2 Insulation resistance (applicable for disconnected adapter) . 11
8.4.3 Voltage standing wave ratio (VSWR) . 12
8.4.4 Insertion loss . 12
8.4.5 RF power handling (if applicable) . 13
8.4.6 Screening effectiveness (if applicable) . 13
8.5 Mechanical test . 14
8.5.1 Interface gauging(applicable for class I and class III adapters) . 14
8.5.2 Mechanical endurance (applicable for class I and class III adapters) . 14
8.5.3 Axial tension (applicable for class II and class III adapters) . 14
8.5.4 Torsion (applicable for class II and class III adapters) . 15
8.5.5 Repeated bending (applicable for class II and class III adapters) . 16
8.5.6 Shock (specified pulse) . 17
8.5.7 Vibration . 17
8.6 Environmental test . 18
8.6.1 Damp heat, steady state . 18
8.6.2 Change of temperature . 18
8.6.3 High temperature endurance. 19
8.6.4 Low temperature endurance . 20
8.6.5 Waterproof (if applicable) . 20
8.6.6 Salt mist . 21
9 Quality assessment . 21
9.1 General . 21
IEC 63249-1:2021 © IEC 2021 – 3 –
9.2 Test condition . 21
9.2.1 Requirements for test mating parts . 21
9.2.2 Test specimen . 21
9.3 Qualification inspection . 22
9.3.1 Test specimens . 22
9.3.2 Inspection procedure . 22
9.3.3 Structurally similar components . 23
9.4 Conformance inspection. 23
9.4.1 General . 23
9.4.2 Lot-by-lot inspection . 23
9.5 Specification structures . 25
9.5.1 General . 25
9.5.2 Sectional specification (SS) . 25
9.5.3 Detail specification (DS) .
...