|
SLOVENSKI STANDARD
01-april-2022
Prenosna multimedijska oprema - Določanje življenjske dobe baterije - 1. del:
Zvočniki z lastnim napajanjem (IEC 63296-1:2021)
Portable multimedia equipment - Determination of battery duration - Part 1: Powered
loudspeaker equipment (IEC 63296-1:2021)
Tragbare Multimedia-Geräte - Bestimmung der Batteriedauer - Teil 1: Lautsprecher mit
eigener Stromversorgung (IEC 63296-1:2021)
Matériel multimédia portable - Détermination de la durée des batteries - Partie 1: Haut-
parleurs alimentés par batteries (IEC 63296-1:2021)
Ta slovenski standard je istoveten z: EN IEC 63296-1:2021
ICS:
33.160.50 Pribor Accessories
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 63296-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2021
ICS 33.160.50
English Version
Portable multimedia equipment - Determination of battery
duration - Part 1: Powered loudspeaker equipment
(IEC 63296-1:2021)
Matériel multimédia portable - Détermination de la durée Tragbare Multimedia-Geräte - Bestimmung der
des batteries - Partie 1: Haut-parleurs alimentés par Batteriedauer - Teil 1: Lautsprecher mit eigener
batteries Stromversorgung
(IEC 63296-1:2021) (IEC 63296-1:2021)
This European Standard was approved by CENELEC on 2021-08-16. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 63296-1:2021 E
European foreword
The text of document 100/3546/CDV, future edition 1 of IEC 63296-1, prepared by IEC/TC 100 “Audio,
video and multimedia systems and equipment” was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 63296-1:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022–05–16
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024–08–16
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 63296-1:2021 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60268-2 NOTE Harmonized as HD 483.2 S2
IEC 60958 (series) NOTE Harmonized as EN IEC 60958 (series)
IEC 62087-6 NOTE Harmonized as EN 62087-6
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60268-1 - Sound system equipment. Part 1: General HD 483.1 S2 -
IEC 60268-5 2003 Sound system equipment - Part 5: EN 60268-5 2003
Loudspeakers
+ A1 2007 + A1 2009
IEC 61672-1 - Electroacoustics - Sound level meters - EN 61672-1 -
Part 1: Specifications
IEC 61938 - Multimedia systems – Guide to the EN IEC 61938 -
recommended characteristics of analogue
interfaces to achieve interoperability (GMT)
IEC 63296-1
Edition 1.0 2021-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Portable multimedia equipment – Determination of battery duration –
Part 1: Powered loudspeaker equipment
Matériel multimédia portable – Détermination de la durée des batteries –
Partie 1: Haut-parleurs alimentés par batteries
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.160.50 ISBN 978-2-8322-9983-8
– 2 – IEC 63296-1:2021 © IEC 2021
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions and abbreviated terms . 6
3.1 Terms and definitions . 6
3.2 Abbreviated terms . 7
4 Measurement conditions . 8
4.1 General . 8
4.2 Environmental conditions . 8
4.3 Acoustical environment . 8
4.4 Input signal . 8
4.4.1 Test signal . 8
4.4.2 Receiver . 8
4.4.3 Other digital equipment . 8
4.5 Sound level meter . 8
4.6 Reproduced sound pressure level . 8
4.7 Background noise . 9
4.8 Measurement accuracy . 9
4.9 Battery . 9
5 Measurement method . 9
5.1 General . 9
5.2 Operating condition . 10
5.3 Adjustment of controls . 10
5.4 Measurement of battery duration . 10
5.5 Characteristics to be specified . 11
Annex A (informative) Location for sound pressure test . 12
A.1 General . 12
A.2 Example test locations . 12
Annex B (informative) Examples of battery duration specifications . 14
B.1 General . 14
B.2 Example 1 of a battery duration specification . 14
B.3 Example 2 of a battery duration specification . 14
Bibliography . 15
Figure 1 – Connection diagram of equipment . 9
Figure 2 – Order of measurement . 10
Figure A.1 – Top view . 12
Figure A.2 – Top and front view . 13
Figure A.3 – Side view . 13
IEC 63296-1:2021 © IEC 2021 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
PORTABLE MULTIMEDIA EQUIPMENT –
DETERMINATION OF BATTERY DURATION –
Part 1: Powered loudspeaker equipment
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8)
...