|
SLOVENSKI STANDARD
01-november-2021
Magnetni materiali - 6. del: Metode merjenja magnetnih lastnosti mehkomagnetnih
kovinskih in praškastih materialov s frekvencami v območju 20 Hz do 100 kHz z
uporabo obročastih vzorcev - Dopolnilo A1 (IEC 60404-6:2018/AMD1:2021)
Magnetic materials - Part 6: Methods of measurement of the magnetic properties of
magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100
kHz by the use of ring specimens (IEC 60404-6:2018/AMD1:2021)
Magnetische Werkstoffe - Teil 6: Verfahren zur Messung der magnetischen
Eigenschaften weichmagnetischer metallischer und pulverförmiger Werkstoffe bei
Frequenzen im Bereich 20 Hz bis 100 kHz mittels Ringproben (IEC 60404-
6:2018/AMD1:2021)
Matériaux magnétiques - Partie 6: Méthodes de mesure des propriétés magnétiques des
matériaux métalliques et des matériaux en poudre magnétiquement doux, aux
fréquences comprises entre 20 Hz et 100 kHz, sur des éprouvettes en forme de tore
(IEC 60404-6:2018/AMD1:2021)
Ta slovenski standard je istoveten z: EN IEC 60404-6:2018/A1:2021
ICS:
17.220.20 Merjenje električnih in Measurement of electrical
magnetnih veličin and magnetic quantities
29.030 Magnetni materiali Magnetic materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 60404-6:2018/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2021
ICS 29.030; 17.220.20
English Version
Magnetic materials - Part 6: Methods of measurement of the
magnetic properties of magnetically soft metallic and powder
materials at frequencies in the range 20 Hz to 100 kHz by the
use of ring specimens
(IEC 60404-6:2018/AMD1:2021)
Matériaux magnétiques - Partie 6: Méthodes de mesure des Magnetische Werkstoffe - Teil 6: Verfahren zur Messung
propriétés magnétiques des matériaux métalliques et des der magnetischen Eigenschaften weichmagnetischer
matériaux en poudre magnétiquement doux, aux metallischer und pulverförmiger Werkstoffe bei Frequenzen
fréquences comprises entre 20 Hz et 100 kHz, sur des im Bereich 20 Hz bis 100 kHz mittels Ringproben
éprouvettes en forme de tore (IEC 60404-6:2018/AMD1:2021)
(IEC 60404-6:2018/AMD1:2021)
This amendment A1 modifies the European Standard EN IEC 60404-6:2018; it was approved by CENELEC on 2021-08-09. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60404-6:2018/A1:2021 E
European foreword
The text of document 68/669/CDV, future IEC 60404-6/AMD1, prepared by IEC/TC 68 “Magnetic
alloys and steels” was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022–05–09
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024–08–09
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60404-6:2018/AMD1:2021 was approved by CENELEC as
a European Standard without any modification.
IEC 60404-6
Edition 3.0 2021-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 1
AM ENDEMENT 1
Magnetic materials –
Part 6: Methods of measurement of the magnetic properties of magnetically soft
metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by
the use of ring specimens
Matériaux magnétiques –
Partie 6: Méthodes de mesure des propriétés magnétiques des matériaux
métalliques et des matériaux en poudre magnétiquemen
...