|
SLOVENSKI STANDARD
01-januar-2019
Vznožki in okovi žarnic in sijalk skupaj s kalibri za kontrolo medsebojne
zamenljivosti in varnosti - 2. del: Okovi sijalk - Dopolnilo A54 (IEC 60061-
2:1969/A54:2018)
Lamp caps and holders together with gauges for the control of interchangeability and
safety - Part 2: Lampholders (IEC 60061-2:1969/A54:2018)
Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und
Sicherheit - Teil 2: Lampenfassungen (IEC 60061-2:1969/A54:2018)
Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et
de la sécurité - Partie 2: Douilles (IEC 60061-2:1969/A54:2018)
Ta slovenski standard je istoveten z: EN 60061-2:1993/A54:2018
ICS:
29.140.10 Grla in držala žarnic Lamp caps and holders
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 60061-2:1993/A54
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2018
ICS 29.140.10
English Version
Lamp caps and holders together with gauges for the control of
interchangeability and safety - Part 2: Lampholders
(IEC 60061-2:1969/A54:2018)
Culots de lampes et douilles ainsi que calibres pour le Lampensockel und -fassungen sowie Lehren zur Kontrolle
contrôle de l'interchangeabilité et de la sécurité - Partie 2: der Austauschbarkeit und Sicherheit - Teil 2:
Douilles Lampenfassungen
(IEC 60061-2:1969/A54:2018) (IEC 60061-2:1969/A54:2018)
This amendment A54 modifies the European Standard EN 60061-2:1993; it was approved by CENELEC on 2018-09-27. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60061-2:1993/A54:2018 E
European foreword
The text of document 34B/1994/FDIS, future IEC 60061-2/A54, prepared by SC 34B "Lamp caps and
holders" of IEC/TC 34 "Lamps and related equipment" was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN 60061-2:1993/A54:2018.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2019-06-27
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2021-09-27
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60061-2:1969/A54:2018 was approved by CENELEC as a
European Standard without any modification.
NORME IEC
INTERNATIONALE
INTERNATIONAL 60061-2
STANDARD
AMENDEMENT 54
AMENDMENT 54
2018-08
Amendement 54
Culots de lampes et douilles ainsi que calibres
pour le contrôle de l'interchangeabilité
et de la sécurité –
Partie 2:
Douilles
Amendment 54
Lamp caps and holders together with
gauges for the control of interchangeability
and safety –
Part 2:
Lampholders
Les feuilles de cet amendement sont à insérer dans
l'IEC 60061-2 (1969)
The sheets contained in this amendment are to be inserted
in IEC 60061-2 (1969)
IEC 2018 Droits de reproduction réservés – Copyright - all rights reserved
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: [email protected] Web:
NORME IEC
INTERNATIONALE
INTERNATIONAL 60061-2
Edition 3.54
STANDARD
2018-08
Modifiée selon les compléments/amended in accordance with supplements:
A(1970), B(1971), C(1972), D(1975), E(1977),
F(1980), G(1983), H(1987), J(1989), K(1992), L(1994),
M(1994), N(1995), P(1996), Q(1996), R(1996), S(1997)
et les amendements/and amendments 18(1998), 19(1999), 20(1999), 21(2000),
22(2001), 23(2001), 24(2001), 25(2002), 26(2002), 27(2002), 28(2003), 29(2003),
30(2003), 31(2004), 32(2004), 33(2005), 34(2006) 35(2007), 36(2007), 37(2008),
38(2009), 39(2009), 40(2010), 41(2010), 42(2010), 43(2011), 44(2011), 45(2012),
46(2013), 47(2013), 48(2014), 49(2015), 50(2015), 51(2016), 52(2017),
53(2017) et/and 54(2018)
Culots de lampes et douilles ainsi que calibres
pour le contrôle de l'interchangeabilité
et de la sécurité –
Partie 2:
Douilles
Lamp caps and holders together with
gauges for the control of interchangeability
and safety –
Part 2:
Lampholders
IEC 2018 Droits de reproduction réservés – Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: [email protected] Web:
IEC 60061-2:1969/AMD54:2018 IEC 2018
SOMMAIRE CONTENTS
DOUILLES - SOMMAIRE PAR DÉSIGNATION LAMPHOLDERS - CONTENTS BY DESIGNATION
Feuilles Sheet
Douilles PX26, PY26d-1 … PY26d-7 . 7005-5-4 Lampholders PX26, , PY26d-1 … PY26d-7 . 7005-5-4
Douille E11 . 7005-6-1 Lampholder E11 . 7005-6-1
Douille EY10 . 7005-7-1 Lampholder EY10 . 7005-7-1
Douilles pour culots à baïonnette BAX9s . 7005-8-1 Lampholders for bayonet caps BAX9s . 7005-8-1
Douilles pour culots à baïonnette BAY9s . 7005-9-1 Lampholders for bayonet caps BAY9s . 7005-9-1
Douilles à baïonnette B22d . 7005-10-8 Bayonet lampholders B22d . 7005-10-8
Douilles à baïonnette B22d-3(90°/135°) . 7005-10A-4 Bayonet lampholders B22d-3(90°/135°) . 7005-10A-4
Douilles pour culots à baïonnette Lampholders for bayonet automobile
pour automobiles BA7 . 7005-11-3 caps BA7 . 7005-11-3
Douilles pour culots à baïonnette Lampholders for bayonet automobile
pour automobiles BA9 . 7005-12-2 caps BA9 . 7005-12-2
Douilles BA15, BAU15, BAW15, BAY15 Lampholders BA15, BAU15, BAW15, BAY15
& BAZ15 . 7005-13-5 & BAZ15 . 7005-13-5
Douilles pour culots à baïonnette Lampholders for bayonet automobile
pour automobiles BA20 . 7005-14-2 caps BA20 . 7005-14-2
Douilles pour culots à baïonnette BA21-3 . 7005-15-2 Lampholders for bayonet caps BA21-3 . 7005-15-2
Douilles à baïonnette B15d . 7005-16-4 Bayonet lampholders B15d . 7005-16-4
Douilles à baïonnette BY22d . 7005-17-5 Bayonet lampholders BY22d . 7005-17-5
Douille pour culots à baïonette BAU15s . 7005-19-1 Lampholder for bayonet caps BAU15s . 7005-19-1
Position de la chemise filetée de la douille Edison Position of holder thread in relation to central
par rapport au contact central. 7005-20-6 contact of the Edison lampholder . 7005-20-6
Douilles E26 . 7005-21A-1 Lampholders E26 . 7005-21A-1
Douilles E39 . 7005-24A-3 Lampholders E39 . 7005-24A-3
Douille E12 . 7005-28-1 Lampholder E12 . 7005-28-1
Position de la chemise filetée par rapport aux Position of holder thread in relation to the central
contacts central et intermédiaire de la douille E26d . 7005-29-2 and intermediate contacts of the lampholder E26d . 7005-29-2
Douille préfocus EP10 . 7005-30-1 Prefocus lampholder EP10 . 7005-30-1
Douilles P20, PX20, PY20 & PZ20 . 7005-31-2 Lampholders P20, PX20, PY20 & PZ20 . 7005-31-2
Douilles P22 & PX22 . 7005-32-2 Lampholders P22 & PX22 . 7005-32-2
Douilles 2G13 . 7005-33-1 Lampholders 2G13 . 7005-33-1
Douille PX43t . 7005-34-1 Lampholder PX43t . 7005-34-1
Douille PX13.5s . 7005-35-1 Lampholder PX13.5s . 7005-35-1
Douille P26s . 7005-36-1 Lampholder P26s . 7005-36-1
Douille PKX22s . 7005-37-1 Lampholder PKX22s . 7005-37-1
Douilles P43t . 7005-39-4 Lampholders P43t. 7005-39-4
Douilles préfocus P28s . 7005-42-6 Prefocus lampholders P28s . 7005-42-6
Douille préfocus P40 . 7005-43-3 Prefocus lampholder P40 . 7005-43-3
Douille de précision P30s pour culot Precision holder P30s for prefocus
préfocus P30s-10.3 . 7005-44-2 cap P30s-10.3 . 7005-44-2
Douilles G17q, GX17q & GY17q . 7005-45-2 Lampholders G17q, GX17q & GY17q . 7005-45-2
Douille pour automobiles P14.5s . 7005-46-3 Lampholder for automobile lamps P14.5s . 7005-46-3
Douille PK22s . 7005-47-2 Lampholder PK22s . 7005-47-2
Distance de montage pour ensemble de Mounting of combined pair of inflexible
deux douilles non flexibles G13 . 7005-50-4 lampholders G13 . 7005-50-4
Distance de montage pour ensemble de Mounting distance of a combined pair of inflexible
deux douilles non flexibles G5 . 7005-51-4 lampholders G5 . 7005-51-4
Distance de montage pour ensemble de deux Mounting distance of a combined pair of lampholders
douilles GX5 . 7005-51A-1 GX5 . 7005-51A-1
Combinaisons de deux douilles R7s & RX7s . 7005-53-4 Combined pairs of lampholders R7s & RX7s . 7005-53-4
Douilles R7s & RX7s . 7005-53A-5 Lampholders R7s & RX7s . 7005-53A-5
Douille Fa6 . 7005-55-3 Lampholder Fa6 . 7005-55-3
Douille G10q . 7005-56-2 Lampholder G10q. 7005-56-2
Douille pour culot à deux contacts Lampholder for recessed double-contact
en retrait R17d . 7005-57-1 cap R17d .
...