EN IEC 62435-9:2021

Electronic components - Long-term storage of electronic semiconductor devices - Part 9: Special cases

EN IEC 62435-9:2021

Name:EN IEC 62435-9:2021   Standard name:Electronic components - Long-term storage of electronic semiconductor devices - Part 9: Special cases
Standard number:EN IEC 62435-9:2021   language:English language
Release Date:30-Sep-2021   technical committee:CLC/TC 47X - Semiconductor devices and trusted chips
Drafting committee:IEC/TC 47 - IEC_TC_47   ICS number:31.020 - Electronic components in general

SLOVENSKI STANDARD
01-december-2021
Elektronske komponente - Dolgoročno skladiščenje elektronskih polprevodniških
elementov - 9. del: Posebni primeri (IEC 62435-9:2021)
Electronic components - Long-term storage of electronic semiconductor devices - Part 9:
Special Cases (IEC 62435-9:2021)
Elektronische Bauteile - Langzeitlagerung elektronischer Halbleiterbauteile – Teil 9:
Sonderfälle (IEC 62435-9:2021)
Composants électroniques - Stockage de longue durée des dispositifs électroniques à
semiconducteurs - Partie 9: Cas particuliers (IEC 62435-9:2021)
Ta slovenski standard je istoveten z: EN IEC 62435-9:2021
ICS:
31.080.01 Polprevodniški elementi Semiconductor devices in
(naprave) na splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62435-9

NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2021
ICS 31.020
English Version
Electronic components - Long-term storage of electronic
semiconductor devices - Part 9: Special cases
(IEC 62435-9:2021)
Composants électroniques - Stockage de longue durée des Elektronische Bauteile - Langzeitlagerung elektronischer
dispositifs électroniques à semiconducteurs - Partie 9: Cas Halbleiterbauteile - Teil 9: Sonderfälle
particuliers (IEC 62435-9:2021)
(IEC 62435-9:2021)
This European Standard was approved by CENELEC on 2021-09-29. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62435-9:2021 E

European foreword
The text of document 47/2700/FDIS, future edition 1 of IEC 62435-9, prepared by IEC/TC 47
"Semiconductor devices" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 62435-9:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-06-29
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-09-29
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62435-9:2021 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60721 series NOTE Harmonized as EN 60721 series
IEC 60721-3-1 NOTE Harmonized as EN IEC 60721-3-1
IEC 60812 NOTE Harmonized as EN IEC 60812
IEC 62435 series NOTE Harmonized as EN IEC 62435 series
IEC 62435-1 NOTE Harmonized as EN 62435-1
IEC 62435-3 NOTE Harmonized as EN IEC 62435-3
IEC 62435-6 NOTE Harmonized as EN IEC 62435-6
IEC 62435-7 NOTE Harmonized as EN IEC 62435-7

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60050-192 -  International electrotechnical vocabulary - - -
Part 192: Dependability
IEC 62435-9
Edition 1.0 2021-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Electronic components – Long-term storage of electronic semiconductor

devices –
Part 9: Special cases
Composants électroniques – Stockage de longue durée des dispositifs

électroniques à semiconducteurs –

Partie 9: Cas particuliers
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.020 ISBN 978-2-8322-1016-3

– 2 – IEC 62435-9:2021 © IEC 2021
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Component storage cases . 9
5 Storage of memory devices . 9
5.1 General . 9
5.2 Semiconductor memory device types . 9
6 Storage of other devices and partial assembly . 11
6.1 General . 11
6.2 Wafer-level chip-scale packages . 11
6.3 Heterogeneous devices. 12
6.4 Modules . 12
7 Storage in alternative environments . 12
7.1 General . 12
7.2 Alternative environments . 12
7.3 Storage environment effect on use reliability . 13
Annex A (informative)  Customer-supplier interaction . 14
Bibliography . 15

Table 1 – Example failure mechanisms and stimuli for memory devices . 10
Table A.1 – Supplier – customer interaction template. 14

IEC 62435-9:2021 © IEC 2021 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTRONIC COMPONENTS – LONG-TERM STORAGE
OF ELECTRONIC SEMICONDUCTOR DEVICES –

Part 9: Special cases
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC 62435-9 has been prepared by IEC technical committee 47: Semiconductor devices. It is
an International Standard.
The text of this International Standard is based on the following documents:
DRAFT Report on voting
47/2700/FDIS 47/2716/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.

– 4 – IEC 62435-9:2021 © IEC 2021
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at /members_experts/refdocs. The main document types developed by IEC are
described in greater detail at /standardsdev/publications.
A list of all parts in the IEC 62435 series, published under the general title Electronic
components – Long-term storage of electronic semiconductor devices, can be found on the IEC
website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IEC 62435-9:2021 © IEC 2021 – 5 –
INTRODUCTION
This document applies to the long-term storage of electronic components in special cases of
configuration. The custom-client relationship for storage of all cases is also included.
This document deals with the long-term storage (LTS) of elec
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27