EN 60335-2-21:2021/A1:2021

Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters

EN 60335-2-21:2021/A1:2021

Name:EN 60335-2-21:2021/A1:2021   Standard name:Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters
Standard number:EN 60335-2-21:2021/A1:2021   language:English language
Release Date:28-Oct-2021   technical committee:CLC/TC 61 - Safety of household and similar electrical appliances
Drafting committee:CLC/TC 61 - Safety of household and similar electrical appliances   ICS number:13.120 - Domestic safety

SLOVENSKI STANDARD
01-februar-2022
Gospodinjski in podobni električni aparati - Varnost - 2-21. del: Posebne zahteve
za akumulacijske grelnike vode - Dopolnilo A1
Household and similar electrical appliances - Safety - Part 2-21: Particular requirements
for storage water heaters
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-21:
Besondere Anforderungen für Wassererwärmer (Warmwasserspeicher und
Warmwasserboiler)
Appareils électrodomestiques et analogues - Sécurité - Partie 2-21: Règles particulières
pour les chauffe-eau à accumulation
Ta slovenski standard je istoveten z: EN 60335-2-21:2021/A1:2021
ICS:
13.120 Varnost na domu Domestic safety
91.140.65 Oprema za ogrevanje vode Water heating equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60335-2-21:2021/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM October 2021
ICS 13.120; 91.140.65
English Version
Household and similar electrical appliances - Safety - Part 2-21:
Particular requirements for storage water heaters
(IEC 60335-2-21:2012/A1:2018)
Appareils électrodomestiques et analogues - Sécurité - Sicherheit elektrischer Geräte für den Hausgebrauch und
Partie 2-21: Règles particulières pour les chauffe-eau à ähnliche Zwecke - Teil 2-21: Besondere Anforderungen für
accumulation Wassererwärmer (Warmwasserspeicher und
(IEC 60335-2-21:2012/A1:2018) Warmwasserboiler)
(IEC 60335-2-21:2012/A1:2018)
This amendment A1 modifies the European Standard EN 60335-2-21:2021; it was approved by CENELEC on 2021-10-04. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60335-2-21:2021/A1:2021 E

European foreword
This document (EN 60335-2-21:2021/A1:2021) consists of the text of IEC 60335-2-21:2012/A1:2018
prepared by IEC/TC 61 “Safety of household and similar electrical appliances”.
The following dates is fixed:
• latest date by which this document has to be implemented at (dop) 2022-10-04
national level by publication of an identical national standard or
by endorsement
• latest date by which the national standards conflicting with this (dow) 2024-10-04
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This European Amendment A1 supplements or modifies the corresponding clauses of the standards below:
— EN 60335-1:2012+A11:2014+ A13:2017+A1:2019+A14:2019+A2:2019+A15:2021 (Part 1)
— EN 60335-2-21:2021(Part 2)
This document has been prepared under a Standardization Request given to CENELEC by the European
Commission and the European Free Trade Association, and supports essential requirements of EU
Directive(s) / Regulation(s).
For relationship with EU Directive(s) / Regulation(s), see informative Annex ZZA, which is an integral part of
this document.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Annex ZC
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
The Annex ZC of part 1 is applicable, with the following addition:
Publication Year Title EN/HD Year
IEC 60584-1 2013 Thermocouples – Part 1: EMF specifications and EN 60584-1 2013
tolerances
Replace the Annex ZZA in Part 2 by the following:
Annex ZZA
(informative)
Relationship between this European Standard and the safety objectives
of Directive 2014/35/EU [2014 OJ L96] aimed to be covered
This European Standard has been prepared under a Commission’s standardization request relating to
harmonized standards in the field of the Low Voltage Directive, M/511, to provide one voluntary means of
conforming to safety objectives of Directive 2014/35/EU of the European Parliament and of the Council of
26 February 2014 on the harmonization of the laws of the Member States relating to the making available on
the market of electrical equipment designed for use within certain voltage limits [2014 OJ L96].
Once this standard is cited in the Official Journal of the European Union under that Directive, compliance
with the normative clau
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27