|
SLOVENSKI STANDARD
01-februar-2022
Nadomešča:
SIST EN 60335-2-25:2012
SIST EN 60335-2-25:2012/A1:2015
SIST EN 60335-2-25:2012/A2:2016
Gospodinjski in podobni električni aparati - Varnost - 2-25. del: Posebne zahteve
za mikrovalovne pečice, vključno s kombiniranimi mikrovalovnimi pečicami
Household and similar electrical appliances - Safety - Part 2-25: Particular requirements
for microwave ovens, including combination microwave ovens
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-25:
Besondere Anforderungen für Mikrowellenkochgeräte und kombinierte
Mikrowellenkochgeräte
Appareils électrodomestiques et analogues - Sécurité - Partie 2-25: Règles particulières
pour les fours à micro-ondes, y compris les fours à micro-ondes combinés
Ta slovenski standard je istoveten z: EN IEC 60335-2-25:2021
ICS:
13.120 Varnost na domu Domestic safety
97.040.20 Štedilniki, delovni pulti, Cooking ranges, working
pečice in podobni aparati tables, ovens and similar
appliances
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 60335-2-25
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2021
ICS 13.120; 97.040.20 Supersedes EN 60335-2-25:2012 and all of its
amendments and corrigenda (if any)
English Version
Household and similar electrical appliances - Safety - Part 2-25:
Particular requirements for microwave ovens, including
combination microwave ovens
(IEC 60335-2-25:2020)
Appareils électrodomestiques et analogues - Sécurité - Sicherheit elektrischer Geräte für den Hausgebrauch und
Partie 2-25: Exigences particulières pour les fours à micro- ähnliche Zwecke - Teil 2-25: Besondere Anforderungen für
ondes, y compris les fours à micro-ondes combinés Mikrowellenkochgeräte und kombinierte
(IEC 60335-2-25:2020) Mikrowellenkochgeräte
(IEC 60335-2-25:2020)
This European Standard was approved by CENELEC on 2021-09-27. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60335-2-25:2021 E
European foreword
This document EN IEC 60335-2-25:2021 consists of the text of IEC 60335-2-25:2020 prepared by
IEC/TC 61 "Safety of household and similar electrical appliances".
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-09-27
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-09-27
document have to be withdrawn
This document supersedes EN 60335-2-25:2012 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document is read in conjunction with EN IEC 60335-2-25:2021/A11:2021.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directives see informative Annex ZZA, which is an integral part of
Endorsement notice
The text of the International Standard IEC 60335-2-25:2020 was approved by CENELEC as a
European Standard.
IEC 60335-2-25
Edition 7.0 2020-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Household and similar electrical appliances – Safety–
Part 2-25: Particular requirements for microwave ovens, including combination
microwave ovens
Appareils électrodomestiques et analogues – Sécurité –
Partie 2-25: Exigences particulières pour les fours à micro-ondes, y compris
les fours à micro-ondes combinés
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 13.120; 97.040.20 ISBN 978-2-8322-7725-6
– 2 – IEC 60335-2-25:2020 © IEC 2020
CONTENTS
FOREWORD . 4
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 9
3 Terms and definitions . 9
4 General requirement . 10
5 General conditions for the tests . 10
6 Classification . 10
7 Marking and instructions . 10
8 Protection against access to live parts . 12
9 Starting of motor-operated appliances . 13
10 Power input and current . 13
11 Heating . 13
12 Void . 13
13 Leakage current and electric strength at operating temperature . 13
14 Transient overvoltages . 13
15 Moisture resistance . 14
16 Leakage current and electric strength . 15
17 Overload protection of transformers and associated circuits . 16
18 Endurance . 16
19 Abnormal operation . 16
20 Stability and mechanical hazards . 18
21 Mechanical strength . 18
22 Construction . 20
23 Internal wiring . 26
24 Components . 26
25 Supply connection and external flexible cords . 27
26 Terminals for external conductors . 27
27 Provision for earthing . 27
28 Screws and connections . 27
29 Clearances, creepage distances and solid insulation . 27
30 Resistance to heat and fire . 27
31 Resistance to rusting . 27
32 Radiation, toxicity and similar hazards . 27
Annexes . 30
Annex A (informative) Routine tests . 30
Annex AA (normative) Combination microwave ovens . 32
Annex BB (normative) Microwave ovens intended to be used on board ships . 34
Bibliography . 36
Figure 101 – Test rod for interlock concealment . 28
IEC 60335-2-25:2020 © IEC 2020 – 3 –
Figure 102 – Test cabinet including working surface, position of funnel and example
for direction of tilt . 28
Figure 103 – Test cabinet including separation board, position of funnel and example
for direction of tilt . 29
– 4 – IEC 60335-2-25:2020 © IEC 2020
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-25: Particular requirements for microwave ovens,
including combination microwave ovens
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors,
...