EN IEC 62868-1:2021

Organic light emitting diode (OLED) Light sources for general lighting - Safety - Part 1: General requirements and tests

EN IEC 62868-1:2021

Name:EN IEC 62868-1:2021   Standard name:Organic light emitting diode (OLED) Light sources for general lighting - Safety - Part 1: General requirements and tests
Standard number:EN IEC 62868-1:2021   language:English language
Release Date:04-Nov-2021   technical committee:CLC/TC 34 - 'Lamps and related equipment
Drafting committee:IEC/SC 34A - IEC_SC_34A   ICS number:29.140.99 - Other standards related to lamps

SLOVENSKI STANDARD
01-januar-2022
Nadomešča:
SIST EN 62868:2016
Organska svetleča dioda (OLED) Svetlobni viri za splošno razsvetljavo - Varnost -
1. del: Splošne zahteve in preskusi (IEC 62868-1:2020)
Organic light emitting diode (OLED) Light sources for general lighting - Safety - Part 1:
General requirements and tests (IEC 62868-1:2020)
Organische Licht emittierende Dioden (OLED) Lichtquellen für die Allgemeinbeleuchtung
- Sicherheit - Teil 1: Allgemeine Anforderungen und Prüfungen (IEC 62868-1:2020)
Sources lumineuses à diodes électroluminescentes organiques (OLED) destinées à
l’éclairage général - Sécurité - Partie 1: Exigences générales et essais (IEC 62868-
1:2020)
Ta slovenski standard je istoveten z: EN IEC 62868-1:2021
ICS:
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62868-1

NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2021
ICS 29.140.99 Supersedes EN 62868:2015 and all of its amendments
and corrigenda (if any)
English Version
Organic light emitting diode (OLED) Light sources for general
lighting - Safety - Part 1: General requirements and tests
(IEC 62868-1:2020)
Sources lumineuses à diodes électroluminescentes Organische Licht emittierende Dioden (OLED) Lichtquellen
organiques (OLED) destinées à l'éclairage général - für die Allgemeinbeleuchtung - Sicherheit - Teil 1:
Sécurité - Partie 1: Exigences générales et essais Allgemeine Anforderungen und Prüfungen
(IEC 62868-1:2020) (IEC 62868-1:2020)
This European Standard was approved by CENELEC on 2021-09-15. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62868-1:2021 E

European foreword
The text of document 34A/2177/FDIS, future edition 1 of IEC 62868-1, prepared by SC 34A "Electric
light sources" of IEC/TC 34 "Lighting" was submitted to the IEC-CENELEC parallel vote and approved
by CENELEC as EN IEC 62868-1:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-05-05
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-11-05
document have to be withdrawn
This document supersedes EN 62868:2015 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a Standardization Request given to CENELEC by the
European Commission and the European Free Trade Association.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62868-1:2020 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60050 (series) NOTE Harmonized as EN IEC 63223 (series)
IEC 60598 (series) NOTE Harmonized as EN 60598 (series)
IEC 62868-2 (series) NOTE Harmonized as EN IEC 62868-2 (series)

To be published. Stage at the time of publication: prEN IEC 63223 (series).
To be published. Stage at the time of publication: FprEN IEC 62868-2 (series).
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60068-2-6 2007 Environmental testing - Part 2-6: Tests - EN 60068-2-6 2008
Test Fc: Vibration (sinusoidal)
IEC 60598-1 (mod) 2014 Luminaires - Part 1: General requirements EN 60598-1 2015
and tests
+ A1 2017 + A1 2018
IEC 62504 - General lighting - Light emitting diode (LED) EN 62504 -
products and related equipment - Terms
and definitions
IEC TR 62854 2014 Sharp edge testing apparatus and test - -
procedure for lighting equipment - Tests for
sharpness of edge
IEC TS 62972 - General lighting - Organic light emitting - -
diode (OLED) products and related
equipment - Terms and definitions
ISO 4046-4 2016 Paper, board, pulps and related terms - - -
Vocabulary - Part 4: Paper and board
grades and converted products
IEC 62868-1
Edition 1.0 2020-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Organic light emitting diode (OLED) light sources for general lighting – Safety –

Part 1: General requirements and tests

Sources lumineuses à diodes électroluminescentes organiques (OLED)

destinées à l’éclairage général – Sécurité –

Partie 1: Exigences générales et essais

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.99 ISBN 978-2-8322-8309-7

– 2 – IEC 62868-1:2020 © IEC 2020
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
4 General . 9
4.1 General requirements . 9
4.2 General test requirements . 9
5 Marking . 10
5.1 Contents and location . 10
5.2 Durability and legibility of marking . 10
6 Construction . 11
6.1 General . 11
6.2 Mechanical strength . 11
6.3 Internal short circuit . 11
6.4 Wireways . 12
6.5 Resistance to dust, solid objects and moisture . 12
7 Mechanical hazard . 12
8 Fault conditions . 12
9 Insulation resistance and electric strength . 13
9.1 Insulation resistance . 13
9.2 Electric strength . 13
10 Thermal stress . 13
11 Creepage distances and clearances . 13
12 Resistance to heat and fire . 13
12.1 Resistance to heat . 13
12.2 Resistance to fire . 14
13 Photobiological safety . 14
14 Terminals . 14
15 Information for luminaire design . 14
Annex A (informative) Construction of OLED panels . 15
Annex B (informative) Information for luminaire design . 17
Annex C (normative) Method of provoking an internal short circuit . 18
C.1 Method for an OLED panel with glass substrates . 18
C.2 Method for an OLED panel with flexible plastic substrates . 18
Annex D (informative) Overview of the OLED lighting system consisting of OLED
panel or module . 19
Annex E (informative) Classification of OLED modules . 20
E.1 Power supply classification . 20
E.2 Installation method classification . 20
Bibliography . 21

IEC 62868-1:2020 © IEC 2020 – 3 –
Figure A.1 – Schematic diagram of OLED tile for lighting . 15
Figure A.2 – Schematic diagram of OLED panel (Example 1) for lighting . 15
Figure A.3 – Schematic diagram of OLED panel (Example 2) for lighting . 16
Figure A.4 – Schematic diagram of OLED panel (Example 3) for lighting . 16
Figure D.1 – Schematic diagram of OLED lighting system consisting of OLED panel or
module . 19

Table 1 – Contents and location of marking . 10

– 4 – IEC 62868-1:2020 © IEC 2020
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ORGANIC LIGHT EMITTING DIODE (OLED) LIGHT
SOURCES FOR GENERAL LIGHTING – SAFETY –

Part 1: General requirements and tests

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specificatio
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27