EN IEC 61375-2-6:2018

Electronic railway equipment - Train communication network (TCN) - Part 2-6: On-board to ground communication

EN IEC 61375-2-6:2018

Name:EN IEC 61375-2-6:2018   Standard name:Electronic railway equipment - Train communication network (TCN) - Part 2-6: On-board to ground communication
Standard number:EN IEC 61375-2-6:2018   language:English language
Release Date:15-Nov-2018   technical committee:CLC/TC 9X - Electrical and electronic applications for railways
Drafting committee:IEC/TC 9 - IEC_TC_9   ICS number:45.060.01 - Railway rolling stock in general

SLOVENSKI STANDARD
01-september-2019
Železniške elektronske naprave - Komunikacijsko omrežje vlaka - 2-6. del:
Komunikacija vlak-tla
Electronic railway equipment - Train communication network - Part 2-6: On-board to
ground communication
Ta slovenski standard je istoveten z: EN IEC 61375-2-6:2018
ICS:
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 61375-2-6

NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2018
ICS 45.060.01
English Version
Electronic railway equipment - Train communication network
(TCN) - Part 2-6: On-board to ground communication
(IEC 61375-2-6:2018)
Matériel électronique ferroviaire - Réseau embarqué de Elektronische Betriebsmittel für Bahnen - Zug-
train (TCN) - Partie 2-6: Communication train-sol Kommunikations-Netzwerk (TCN) - Teil 2-6: Kommunikation
(IEC 61375-2-6:2018) vom Zug zur Landseite
(IEC 61375-2-6:2018)
This European Standard was approved by CENELEC on 2018-06-18. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61375-2-6:2018 E

European foreword
The text of document 9/2374/FDIS, future edition 1 of IEC 61375-2-6, prepared by IEC/TC 9 "Electrical
equipment and systems for railways" was submitted to the IEC-CENELEC parallel vote and approved
by CENELEC as EN IEC 61375-2-6:2018.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2019-05-16
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2021-11-16
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this
document.
Endorsement notice
The text of the International Standard IEC 61375-2-6:2018 was approved by CENELEC as a
European Standard without any modification.

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61375-1 2012 Electronic railway equipment - Train EN 61375-1 2012
communication network (TCN) - Part 1:
General architecture
IEC 61375-2-3 2015 Electronic railway equipment - Train EN 61375-2-3 2015
communication network (TCN) - Part 2-3:
TCN communication profile
- -  + A11 2017
IEC 61375-3-4 -  Electronic railway equipment - Train EN 61375-3-4 2014
communication network (TCN) - Part 3-4:
Ethernet Consist Network (ECN)
+A11 2017
IEC 62280 2014* Railway applications - Communication, - -
signalling and processing systems - Safety
related communication in transmission
systems
IEC 62443 series Industrial communication networks - EN 62443 series
Network and system security - Part 2-1:
Establishing an industrial automation and
control system security program
IEC 62443-3-3 2013* Industrial communication networks - - -
Network and system security - Part 3-3:
System security requirements and security
levels
IEC 62580-1 -  Electronic railway equipment - On-board EN 62580-1 2016
multimedia and telematic subsystems for
railways - Part 1: General architecture
+A11 2017
* Dated as no equivalent European Standard exists
ISO/IEC 20922 2016 Information technology - Message Queuing - -
Telemetry Transport (MQTT) v3.1.1
IEEE 802.3 2015* IEEE Standard for Information technology - - -
Specific requirements - Part 3: Carrier
Sense Multiple Access with Collision
Detection (CMSA/CD) Access Method and
Physical Layer Specifications
IEEE 802.11 2016 IEEE Standard for Information technology - - -
Telecommunications and information
exchange between systems Local and
metropolitan area networks - Specific
requirements - Part 11: Wireless LAN
Medium Access Control (MAC) and
Physical Layer (PHY) Specifications
IEEE 802.1X 2010 IEEE Standard for Local and metropolitan - -
area networks - Port-Based Network
Access Control
RFC 2136 1997* Dynamic Updates in the Domain Name - -
System (DNS UPDATE)
RFC 2616 1999* Hypertext Transfer Protocol -- HTTP/1.1 - -
RFC 2818 2000* HTTP Over TLS - -
RFC 3986 2005*  Uniform Resource Identifier (URI): Generic - -
Syntax
RFC 4627 2006* The application/json Media Type for - -
JavaScript Object Notation (JSON)
RFC 7159 2014* The JavaScript Object Notation (JSON) - -
Data Interchange Format
* Dated as no equivalent European Standard exists
Annex ZZ
(informative)
Relationship between this European standard and the essential requirements
of EU Directive 2016/797/EU [2016 OJ L138] aimed to be covered
This European Standard has been prepared under a Commission’s standardization request relating to
harmonized standards in the field of the Interoperability of the rail system within the European Union,
M/483, to provide one voluntary means of conforming to essential requirements of Directive
2016/797/EU of the European Parliament and of the Council of 11 May 2016 on the harmonization of
the laws of the Member States relating to the interoperability of the rail system within the European
Union [2016 OJ L138/44].
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZZ.1 for “Locomotives and
Passenger Rolling Stock”, Table ZZ.2 for “Energy”, Table ZZ.3 for “Telematics Applications for
Passenger Services”, confers, within the limits of the scope of this standard, a presumption of
conformity with the corresponding essential requirements of that Directive, and associated EFTA
regulations.
Table ZZ.1 - Correspondence between this European Standard, the TSI “Locomotives and
Passenger Rolling Stock” (REGULATION (EU) No 1302/2014 of 18 November 2014) and
Directive 2016/797/EU [2016 OJ L138]

Essential Chapter / § / points / Clause(s) / sub- Remarks / Notes
Requirements of of LOC & PAS TSI clause(s) of this EN
Directive 2016/797/EU
Clause 4 The TSI does not
1.5 Technical 4.2.8.2.8 On-board Clause 5 impose any technical
compatibility energy measurement Clause 6 solution regarding
2. Requirements system physical interfaces
specific to each 4.2.12.2 General between units.
subsubsystem documentation: - Annex A
2.4. Rolling Stock description of Annex B This standard offers a
2.4.2. Reliability and computerised on board general multi-purpose
availability systems solution for the digital
2.4.3. Technical Appendix D - On-board communication
compatibility energy measurement between on-board
system networked applications
and ground
applications, so it is
relevant to equipment
and train
interoperability.
This standard closes
an Open Point in the
TSI
Table ZZ.2 - Correspondence between this European Standard, the TSI “Energy”
(REGULATION (EU) No 1301/2014 of 18 November 2014) and Directive 2016/797/EU [2016 OJ
L138]
Essential Chapter / § / points / Clause(s) / sub- Remarks / Notes
Requirements of of ENE TSI clause(s) of this EN
Directive 2016/797/EU
1.5 Technical 4.2.17. On-ground Clause 4 This standard closes
compatibility energy data collecting an Open Point in the
Clause 5
system TSI
Clause 7
Annex A
Annex B
Table ZZ.3 - Correspondence between this European Standard, the TSI “Telematics
Applications for Passenger Services” (published in the Official Journal L 123 on 12 May 2011,
p. 11) and Directive 2016/797/EU [2016 OJ L138]

Essential Chapter / § / points / Clause(s) / sub- Remarks / Notes
Requirements of of ENE TSI clause(s) of this EN
Directive 2016/797/EU
1.2 Reliability and 4.2.21. Networking and Clause 4 The solution specified
availability communication in this standard can be
Clause 5
part of the general
2. Requirements 4.2.21.1. General
Clause 6 Information Exchange
specific to each architecture
Architecture
subsubsystem
Clause 7
2.7. Telematics Annex A
applications for freight
and passengers
2.7.1. Technical
compatibility
2.7.2. Reliability and
availability
WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.
IEC 61375-2-6
Edition 1.0 2018-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Electronic railway equipment – Train communication network (TCN) –

Part 2-6: On-board to ground communication

Matériel électronique ferroviaire – Réseau embarqué de train (TCN) –

Partie 2-6: Communication train-sol

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 45.060.01 ISBN 978-2-8322-5611-4

– 2 – IEC 61375-2-6:2018 © IEC 2018
CONTENTS
FOREWORD . 8
INTRODUCTION . 10
1 Scope . 11
2 Normative references . 11
3 Terms, definitions, symbols, abbreviated terms and conventions . 12
3.1 Terms and definitions . 12
3.2 Symbols and abbreviated terms . 19
3.3 State diagram conventions . 21
4 Board to Ground Communication system architecture . 21
4.1 General . 21
4.2 Requirements . 21
4.3 Mobile communication network architecture . 23
4.3.1 General . 23
4.3.2 On-board network interface . 23
4.4 System breakdown structure . 24
4.4.1 General .
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27