EN IEC 60335-2-84:2021

Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilet appliances

EN IEC 60335-2-84:2021

Name:EN IEC 60335-2-84:2021   Standard name:Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilet appliances
Standard number:EN IEC 60335-2-84:2021   language:English language
Release Date:25-Nov-2021   technical committee:CLC/TC 61 - Safety of household and similar electrical appliances
Drafting committee:CLC/TC 61 - Safety of household and similar electrical appliances   ICS number:91.140.70 - Sanitary installations

SLOVENSKI STANDARD
01-februar-2022
Nadomešča:
SIST EN 60335-2-84:2003
SIST EN 60335-2-84:2003/A1:2008
SIST EN 60335-2-84:2003/A2:2019
Gospodinjski in podobni električni aparati - Varnost - 2-84. del: Posebne zahteve
za stranišča
Household and similar electrical appliances - Safety - Part 2-84: Particular requirements
for toilet appliances
Appareils électrodomestiques et analogues - Sécurité - Partie 2-84: Exigences
particulières pour les appareils de toilettes (IEC 60335-2-84:2019)
Ta slovenski standard je istoveten z: EN IEC 60335-2-84:2021
ICS:
13.120 Varnost na domu Domestic safety
91.140.70 Sanitarne naprave Sanitary installations
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 60335-2-84

NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2021
ICS 91.140.70 Supersedes EN 60335-2-84:2003 and all of its
amendments and corrigenda (if any)
English Version
Household and similar electrical appliances - Safety - Part 2-84:
Particular requirements for toilet appliances
(IEC 60335-2-84:2019)
Appareils électrodomestiques et analogues - Sécurité - Sicherheit elektrischer Geräte für den Hausgebrauch und
Partie 2-84: Exigences particulières pour les appareils de ähnliche Zwecke - Teil 2-84: Besondere Anforderungen an
toilettes (IEC 60335-2-84:2019) Geräte für Toiletten
(IEC 60335-2-84:2019) (IEC 60335-2-84:2019)
This European Standard was approved by CENELEC on 2021-10-11. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60335-2-84:2021 E

European foreword
This document EN IEC 60335-2-84:2021 consists of the text of IEC 60335-2-84:2019 prepared by
IEC/TC 61 "Safety of household and similar electrical appliances".
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-10-11
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-10-11
document have to be withdrawn
This document supersedes EN 60335-2-84:2003 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document is read in conjunction with EN IEC 60335-2-84:2021/A11:2021.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60335-2-84:2019 was approved by CENELEC as a
European Standard.
IEC 60335-2-84
Edition 3.0 2019-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Household and similar electrical appliances – Safety –

Part 2-84: Particular requirements for toilet appliances

Appareils électrodomestiques et analogues – Sécurité –

Partie 2-84: Exigences particulières pour les appareils de toilettes

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 91.140.70 ISBN 978-2-8322-7533-7

– 2 – IEC 60335-2-84:2019  IEC 2019
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
4 General requirement . 9
5 General conditions for the tests . 9
6 Classification . 9
7 Marking and instructions . 10
8 Protection against access to live parts . 10
9 Starting of motor-operated appliances . 10
10 Power input and current . 11
11 Heating . 11
12 Void . 11
13 Leakage current and electric strength at operating temperature . 11
14 Transient overvoltages . 12
15 Moisture resistance . 12
16 Leakage current and electric strength . 12
17 Overload protection of transformers and associated circuits . 12
18 Endurance . 12
19 Abnormal operation . 12
20 Stability and mechanical hazards . 13
21 Mechanical strength . 13
22 Construction . 14
23 Internal wiring . 15
24 Components . 16
25 Supply connection and external flexible cords . 16
26 Terminals for external conductors . 16
27 Provision for earthing . 16
28 Screws and connections . 16
29 Clearances, creepage distances and solid insulation . 16
30 Resistance to heat and fire . 17
31 Resistance to rusting . 17
32 Radiation, toxicity and similar hazards . 18
Annexes . 19
Annex R (normative) Software evaluation . 19
Bibliography . 19

Figure 101 – Diagram for leakage current measurement for water heaters having bare
heating elements . 18

IEC 60335-2-84:2019  IEC 2019 – 3 –
Table 101 – Maximum normal temperature rises . 11
Table 102 – Maximum abnormal temperature rises . 13

– 4 – IEC 60335-2-84:2019  IEC 2019
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-84: Particular requirements for toilet appliances

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment
declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard
IEC 60335-2-84 has been prepared by IEC technical committee 61: Safety of household and similar electrical
appliances.
This third edition cancels and replaces the second edition published in 2002,
Amendment 1:2008 and Amendment 2:2013. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
– definitions have been renumbered (Clause 3);
– requirements for installation instructions have been updated to reflect the option in 7.101 of
the label being placed on the applian
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27