EN IEC 61914:2021

Cable cleats for electrical installations

EN IEC 61914:2021

Name:EN IEC 61914:2021   Standard name:Cable cleats for electrical installations
Standard number:EN IEC 61914:2021   language:English language
Release Date:02-Dec-2021   technical committee:CLC/TC 213 - Cable management systems
Drafting committee:IEC/SC 23A - IEC_SC_23A   ICS number:29.120.20 - Connecting devices

SLOVENSKI STANDARD
01-februar-2022
Nadomešča:
SIST EN 61914:2016
Kabelske objemke za elektroinštalacije (IEC 61914:2021)
Cable cleats for electrical installations (IEC 61914:2021)
Kabelhalter für elektrische Installationen (IEC 61914:2021)
Brides de câbles pour installations électriques (IEC 61914:2021)
Ta slovenski standard je istoveten z: EN IEC 61914:2021
ICS:
29.120.99 Druga električna dodatna Other electrical accessories
oprema
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 61914

NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2021
ICS 29.120.20 Supersedes EN 61914:2016 and all of its amendments
and corrigenda (if any)
English Version
Cable cleats for electrical installations
(IEC 61914:2021)
Brides de câbles pour installations électriques Kabelhalter für elektrische Installationen
(IEC 61914:2021) (IEC 61914:2021)
This European Standard was approved by CENELEC on 2021-11-10. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61914:2021 E
European foreword
The text of document 23A/976/FDIS, future edition 3 of IEC 61914, prepared by SC 23A "Cable
management systems" of IEC/TC 23 "Electrical accessories" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 61914:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-08-10
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-11-10
document have to be withdrawn
This document supersedes EN 61914:2016 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a Standardization Request given to CENELEC by the
European Commission and the European Free Trade Association, and supports essential
requirements of EU Directive(s) / Regulation(s).
For the relationship with EU Directive(s) / Regulation(s), see informative Annex ZZ, which is an
integral part of this document.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61914:2021 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60068-2-75 NOTE Harmonized as EN 60068-2-75
IEC 60364-5-51 NOTE Harmonized as HD 60364-5-51
IEC 60909 (series) NOTE Harmonized as EN 60909 (series)
IEC 60909-0 NOTE Harmonized as EN 60909-0
IEC 61537:2006 NOTE Harmonized as EN 61537:2007 (not modified)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60060-1 2010 High-voltage test techniques – Part 1: General EN 60060-1 2010
definitions and test requirements
IEC 60502-1 2021 Power cables with extruded insulation and their - -
accessories for rated voltages from 1 kV (Um =
1,2 kV) up to 30 kV (Um = 36 kV) - Part 1:
Cables for rated voltages of 1 kV (Um = 1,2 kV)
and 3 kV (Um = 3,6 kV)
IEC 60695-11-5 2016 Fire hazard testing – Part 11-5: Test flames – EN 60695-11-5 2017
Needle-flame test method – Apparatus,
confirmatory test arrangement and guidance
ISO 1461 2009 Hot dip galvanized coatings on fabricated iron EN ISO 1461 2009
and steel articles – Specifications and test
methods
ISO 2081 2018 Metallic and other inorganic coatings – EN ISO 2081 2018
Electroplated coatings of zinc with
supplementary treatments on iron or steel
ISO 3575 2016 Continuous hot dip zinc-coated and zinc-iron - -
alloy-coated carbon steel sheet of commercial
and drawing qualities
ISO 4287 1997 Geometrical product specifications (GPS) – EN ISO 4287 1998
Surface texture: Profile method – Terms,
definitions and surface texture parameters
+ A1 2009
ISO 4892-2 2013 Plastics – Methods of exposure to laboratory EN ISO 4892-2 2013
light sources – Part 2: Xenon-arc lamps
ISO 4998 2014 Continuous hot-dip zinc-coated and zinc-iron - -
alloy-coated carbon sheet steel of structural
quality
ISO 9227 2017 Corrosion tests in artificial atmospheres – Salt EN ISO 9227 2017
spray tests
ISO 14713-1 2017 Zinc coatings - Guidelines and recommendations EN ISO 14713-1 2017
for the protection against corrosion of iron and
Publication Year Title EN/HD Year
steel in structures - Part 1: General principles of
design and corrosion resistance
ISO 14713-2 2019 Zinc coatings - Guidelines and recommendations EN ISO 14713-2 2020
for the protection against corrosion of iron and
steel in structures - Part 2: Hot dip galvanizing
- - Continuously hot-dip coated steel flat products EN 10346 2015
for cold forming - Technical delivery conditions
Annex ZZ
(informative)
Relationship between this European Standard and the safety
objectives of Directive 2014/35/EU [2014 OJ L96] aimed to be
covered
This European Standard has been prepared under a Commission’s standardization request relating to
harmonized standards in the field of the Low Voltage Directive, M/511, to provide one voluntary means
of conforming to safety objectives of Directive 2014/35/EU of the European Parliament and of the
Council of 26 February 2014 on the harmonization of the laws of the Member States relating to the
making available on the market of electrical equipment designed for use within certain voltage limits
[2014 OJ L96].
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZZ.1 confers, within the limits of
the scope of this standard, a presumption of conformity with the corresponding safety objectives of
that Directive, and associated EFTA regulations.
Table ZZ.1 — Correspondence between this European Standard
and Annex I of Directive 2014/35/EU [2014 OJ L96]
Safety objectives of Clause(s) / sub-clause(s) Remarks / Notes
Directive 2014/35/EU of this EN
(1)(a) Clause 7 Marking and
documentation
(1)(b) Clause 4 General requirements
Clause 7 Marking and
documentation
Clause 8 Construction
Clause 9 Mechanical properties
(1)(c) Clause 3 Terms, definitions and
abbreviations
Clause 4 General requirements
(2)(a) Not applicable Cable cleats do not carry current and
are not connected to any live parts.
Risk assessment shows there is no
danger from direct or indirect
contact.
(2)(b) Not applicable Cable cleats do not carry current and
are not connected to any live parts.
Risk assessment shows there is no
danger from temperature, arcs or
radiation.
(2)(c) Clause 4 General requirements
Clause 8 Construction
Clause 9 Mechanical properties
Clause 10 Fire Hazards
Clause 11 Environmental
influences
Clause 12 Electromagnetic
compatibility
(2)(d) Not applicable Cable cleats do not carry current and
are not connected to any live parts.
Risk assessment shows that there is
no need for insulation.
(3)(a) Clause 4 General requirements
Clause 8 Construction
Clause 9 Mechanical properties
(3)(b) Clause 10 Fire Hazards
Clause 11 Environmental
influences
Clause 12 Electromagnetic
compatibility
(3)(c) Subclause 9.5 Test for resistance
to electromagnetic force
WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
Standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.
IEC 61914
Edition 3.0 2021-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Cable cleats for electrical installations

Brides de câbles pour installations électriques

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.120.20 ISBN 978-2-8322-1030-0

– 2 – IEC 61914:2021 © IEC 2021
CONTENTS
FOREWORD . 5
1 Scope . 7
2 Normative references . 7
3 Terms, definitions and abbreviations . 8
4 General requirements . 10
5 General notes on tests . 10
6 Classification . 11
6.1 Classification according to material . 11
6.1.1 Metallic . 11
6.1.2 Non-metallic . 11
6.1.3 Composite . 11
6.2 Classification according to maximum and minimum temperature . 12
6.3 Classification according to resistance to impact . 12
6.3.1 Very light . 12
6.3.2 Light . 12
6.3.3 Medium . 12
6.3.4 Heavy . 12
6.3.5 Very heavy . 12
6.4 Classification according to type of retention or resistance to
electromechanical forces or both . 13
6.4.1 General . 13
6.4.2 With lateral retention . 13
6.4.3 With axial retention . 13
6.4.4 Resistant to electromechanical forces, withstanding one short circuit . 13
6.4.5 Resistant to electromechanical forces, withstanding more than one
short circuit . 13
6.5 Classification according to environmental influences .
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27