EN IEC 61970-452:2021

Energy management system application program interface (EMS-API) - Part 452: CIM static transmission network model profiles

EN IEC 61970-452:2021

Name:EN IEC 61970-452:2021   Standard name:Energy management system application program interface (EMS-API) - Part 452: CIM static transmission network model profiles
Standard number:EN IEC 61970-452:2021   language:English language
Release Date:02-Dec-2021   technical committee:CLC/TC 57 - Power systems management and associated information exchange
Drafting committee:IEC/TC 57 - IEC_TC_57   ICS number:33.200 - Telecontrol. Telemetering

SLOVENSKI STANDARD
01-februar-2022
Nadomešča:
SIST EN 61970-452:2018
Aplikacijski programski vmesnik za sistem upravljanja z energijo (EMS-API) - 452.
del: Profili CIM za statični model prenosnega omrežja
Energy management system application program interface (EMS-API) - Part 452: CIM
static transmission network model profiles
Schnittstelle für Anwendungsprogramme für Netzführungssysteme (EMS-API) - Teil 452:
CIM-Statische-Übertragungsnetzwerk-Modell-Profile
Interface de programmation d'application pour système de gestion d'énergie (EMS-API) -
Partie 452: Profils du modèle de réseau de transport statique CIM
Ta slovenski standard je istoveten z: EN IEC 61970-452:2021
ICS:
29.240.30 Krmilna oprema za Control equipment for electric
elektroenergetske sisteme power systems
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 61970-452

NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2021
ICS 33.200 Supersedes EN 61970-452:2017 and all of its
amendments and corrigenda (if any)
English Version
Energy management system application program interface
(EMS-API) - Part 452: CIM static transmission network model
profiles
(IEC 61970-452:2021)
Interface de programmation d'application pour système de Schnittstelle für Anwendungsprogramme für
gestion d'énergie (EMS-API) - Partie 452: Profils du modèle Netzführungssysteme (EMS-API) - Teil 452: CIM-Statische-
de réseau de transport statique CIM Übertragungsnetzwerk-Modell-Profile
(IEC 61970-452:2021) (IEC 61970-452:2021)
This European Standard was approved by CENELEC on 2021-12-01. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61970-452:2021 E

European foreword
The text of document 57/2400/FDIS, future edition 4 of IEC 61970-452, prepared by IEC/TC 57
“Power systems management and associated information exchange” was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN IEC 61970-452:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022–09–01
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024–12–01
document have to be withdrawn
This document supersedes EN 61970-452:2017 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61970-452:2021 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 61968-13 NOTE Harmonized as EN IEC 61968-13
IEC 61970-1 NOTE Harmonized as EN 61970-1
IEC/TS 61970-2 NOTE Harmonized as CLC/TS 61970-2
IEC 61970-456 NOTE Harmonized as EN IEC 61970-456
IEC 61970-501 NOTE Harmonized as EN 61970-501
IEC 61970-552 NOTE Harmonized as EN 61970-552
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by
(mod), the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61970-301 2020 Energy management system application EN IEC 61970-301 2020
program interface (EMS-API) - Part 301:
Common information model (CIM) base

IEC 61970-452
Edition 4.0 2021-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Energy management system application program interface (EMS-API) –

Part 452: CIM static transmission network model profiles

Interface de programmation d'application pour système de gestion d'énergie

(EMS-API) –
Partie 452: Profils du modèle de réseau de transport statique CIM

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.200 ISBN 978-2-8322-1032-8

– 2 – IEC 61970-452:2021 © IEC 2021
CONTENTS
FOREWORD . 23
INTRODUCTION . 25
1 Scope . 26
2 Normative references . 26
3 Terms and definitions . 26
4 Application profile specification. 27
4.1 General . 27
4.2 Version information . 27
4.2.1 Core equipment profile . 27
4.2.2 Operation profile . 27
4.2.3 Short-Circuit profile. 28
4.3 Requirements and constraints . 28
4.4 Transformer modelling . 40
4.5 Modelling authorities . 41
4.6 Use of measurement classes . 41
4.6.1 General . 41
4.6.2 ICCP data exchange . 42
4.7 Voltage or active power regulation . 42
4.8 Use of curves . 42
4.8.1 General . 42
4.8.2 Generating unit reactive power limits . 42
4.9 Definition of schedules . 42
5 Detailed profile specification . 43
5.1 General . 43
5.2 Core Equipment Profile . 43
5.2.1 General . 43
5.2.2 (abstract) EarthFaultCompensator . 66
5.2.3 (abstract) EnergyArea . 67
5.2.4 (abstract) EnergyConnection . 67
5.2.5 EnergyConsumer . 68
5.2.6 EnergySchedulingType . 69
5.2.7 TapSchedule . 69
5.2.8 EnergySource . 70
5.2.9 (abstract) Equipment . 71
5.2.10 (abstract) EquipmentContainer . 72
5.2.11 (abstract) ACDCConverter . 72
5.2.12 ACDCConverterDCTerminal . 73
5.2.13 (abstract) ACDCTerminal . 74
5.2.14 ACLineSegment . 75
5.2.15 ActivePowerLimit . 76
5.2.16 ApparentPowerLimit . 76
5.2.17 AsynchronousMachine . 77
5.2.18 (abstract) AuxiliaryEquipment . 78
5.2.19 BaseVoltage . 78
5.2.20 (abstract) BasicIntervalSchedule . 78
5.2.21 BatteryUnit . 79

IEC 61970-452:2021 © IEC 2021 – 3 –
5.2.22 Bay . 79
5.2.23 Breaker. 80
5.2.24 BusbarSection . 81
5.2.25 BusNameMarker . 81
5.2.26 CAESPlant . 82
5.2.27 Clamp . 82
5.2.28 ConformLoadSchedule . 83
5.2.29 CogenerationPlant . 84
5.2.30 CombinedCyclePlant . 84
5.2.31 (abstract) ConductingEquipment . 84
5.2.32 (abstract) Conductor . 85
5.2.33 ConformLoad . 86
5.2.34 ConformLoadGroup . 86
5.2.35 ConnectivityNode . 87
5.2.36 (abstract) ConnectivityNodeContainer . 87
5.2.37 (abstract) Connector .
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27