|
SLOVENSKI STANDARD
01-marec-2019
1DGRPHãþD
SIST HD 60364-5-56:2011
SIST HD 60364-5-56:2011/A1:2012
SIST HD 60364-5-56:2011/A11:2013
SIST HD 60364-5-56:2011/A12:2017
1L]NRQDSHWRVWQHHOHNWULþQHLQãWDODFLMHGHO ,]ELUDLQQDPHVWLWHYHOHNWULþQH
RSUHPH9DUQRVWQRQDSDMDQMH
Low-voltage electrical installations - Part 5-56: Selection and erection of electrical
equipment - Safety services
Errichten von Niederspannungsanlagen - Teil 5-56: Auswahl und Errichtung elektrischer
Betriebsmittel - Einrichtungen für Sicherheitszwecke
Installations électriques à basse tension - Partie 5-56: Choix et mise en oeuvre des
matériels - Services de sécurité
Ta slovenski standard je istoveten z: HD 60364-5-56:2018
ICS:
91.140.50 Sistemi za oskrbo z elektriko Electricity supply systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
HARMONIZATION DOCUMENT HD 60364-5-56
DOCUMENT D'HARMONISATION
HARMONISIERUNGSDOKUMENT
December 2018
ICS 91.140.50 Supersedes HD 60364-5-56:2010
HD 60364-5-56:2010/A1:2011
HD 60364-5-56:2010/A11:2013
HD 60364-5-56:2010/A12:2017
English Version
Low-voltage electrical installations - Part 5-56: Selection and
erection of electrical equipment - Safety services
(IEC 60364-5-56:2018)
Installations électriques à basse tension - Partie 5-56: Choix Errichten von Niederspannungsanlagen - Teil 5-56:
et mise en oeuvre des matériels - Installations de sécurité Auswahl und Errichtung elektrischer Betriebsmittel -
(IEC 60364-5-56:2018) Einrichtungen für Sicherheitszwecke
(IEC 60364-5-56:2018)
This Harmonization Document was approved by CENELEC on 2018-12-07. CENELEC members are bound to comply with the
CEN/CENELEC Internal Regulations which stipulate the conditions for implementation of this Harmonization Document at national level.
Up-to-date lists and bibliographical references concerning such national implementations may be obtained on application to the CEN-
CENELEC Management Centre or to any CENELEC member.
This Harmonization Document exists in three official versions (English, French, German).
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. HD 60364-5-56:2018 E
European foreword
The text of document 64/2316/FDIS, future edition 3 of IEC 60364-5-56, prepared by IEC/TC 64
"Electrical installations and protection against electric shock" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as HD 60364-5-56:2018.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2019-09-07
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2021-12-07
document have to be withdrawn
This document supersedes HD 60364-5-56:2010, HD 60364-5-56:2010/A1:2011,
HD 60364‑5‑56:2010/A11:2013, and HD 60364-5-56:2010/A12:2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60364-5-56:2018 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60079-14 NOTE Harmonized as EN 60079-14
IEC 60364-4-43:2008 NOTE Harmonized as HD 60364-4-43:2010 (modified)
IEC 60623 NOTE Harmonized as EN 60623
IEC 60896 (series) NOTE Harmonized as EN 60896 (series)
IEC 61508-4:2010 NOTE Harmonized as EN 61508-4:2010 (not modified)
IEC 62034 NOTE Harmonized as EN 62034
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60331 series Tests for electric cables under fire conditions - - -
Circuit integrity
IEC 60332-1-2 - Tests on electric and optical fibre cables under fire EN 60332-1-2 -
conditions - Part 1-2: Test for vertical flame
propagation for a single insulated wire or cable -
Procedure for 1 kW pre-mixed flame
IEC 60364-4-41 2005 Low-voltage electrical installations - Part 4-41: HD 60364-4-41 2017
(mod) Protection for safety - Protection against electric
shock
- - + A11 2017
IEC 60364-5-52 - Low-voltage electrical installations - Part 5-52: HD 60364-5-52 -
Selection and erection of electrical equipment -
Wiring systems
IEC 60598-2-22 - Luminaires - Part 2-22: Particular requirements - EN 60598-2-22 -
Luminaires for emergency lighting
IEC 60702-1 - Mineral insulated cables and their terminations EN 60702-1 -
with a rated voltage not exceeding 750 V - Part 1:
Cables
IEC 60702-2 - Mineral insulated cables and their terminations EN 60702-2 -
with a rated voltage not exceeding 750 V - Part 2:
Terminations
IEC 62040-1 - Uninterruptible power systems (UPS) - Part 1: - -
Safety requirements
IEC 62040-2 - Uninterruptible power systems (UPS) - Part 2: EN IEC 62040-2 -
Electromagnetic compatibility (EMC) requirements
IEC 62040-3 - Uninterruptible power systems (UPS) - Part 3: EN 62040-3 -
Method of specifying the performance and test
requirements
ISO 8528-12 - Reciprocating internal combustion engine driven - -
alternating current generating sets - Part 12:
Emergency power supply to safety services
ISO 30061 2007 Emergency lighting - -
IEC 60364-5-56
Edition 3.0 2018-11
INTERNATIONAL
STANDARD
Low-voltage electrical installations –
Part 5-56: Selection and erection of electrical equipment – Safety services
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 91.140.50 ISBN 978-2-8322-6180-4
– 2 – IEC 60364-5-56:2018 © IEC 2018
CONTENTS
FOREWORD . 3
560.1 Scope . 5
560.2 Normative references . 5
560.3 Terms and definitions . 6
560.4 Classification . 8
560.5 General . 8
560.6 Electrical sources for safety services . 9
560.7 Electrical circuits of safety services. 10
560.8 Wiring systems . 11
560.9 Emergency lighting applications . 12
560.10 Fire protection applications/equipment . 14
Annex A (informative) Guidance for emergency lighting . 15
Annex B (informative) Guidance for fire protection equipment . 16
Annex C (informative) List of notes concerning certain countries . 17
Annex D (informative) Fire switch . 21
Annex E (informative) Example of installation methods of safety services with cable
management system . 22
Annex F (informative) Wiring systems . 23
F.1 Ambient test temperature rise . 23
F.2 Duration of the safety service. 23
F.3 Expected resistance of feeder conductors . 23
F.4 Protection against electric shock in the event of a failure by means of the
touch voltage reduction . 24
F.5 Conductor resistance in case of fire . 24
F.6 High temperature effects . 25
F.7 Feeder circuits . 25
Annex G (informative) Guidance on suitable locations for electrical sources for safety
services . 26
G.1 Recommendations for a suitable location for an electrical source for safety
services . 26
G.2 Conditions of fire protection . 26
Bibliography . 27
Figure D.1 – Fire switch installation . 21
Figure E.1 – Example of cable installation for safety services . 22
Table A.1 – Guidance for emergency lighting . 15
Table B.1 – Guidance for safety equipment . 16
IEC 60364-5-56:2018 © IEC 2018 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
LOW-VOLTAGE ELECTRICAL INSTALLATIONS –
Part 5-56: Selection and erection of electrical equipment –
Safety services
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IE
...