There are many types of power plants, the most common include thermal power plants, hydroelectric power plants, atomic power plants, solar power plants, wind farms, tidal power plants, biomass power plants, etc. Except for solar power plants, the basic principle of other power plants is that the main engine converts various natural energies into kinetic energy, drives the generator to rotate, and conductors are used to cut the magnetic lines in the generator to produce electricity. It is then delivered to electricity consumers via transmission lines.
The diameter of the 95 meter tower is 156 meters. The wind tower is the center of wind energy production. It mainly plays a supporting role in the wind turbine and absorbs the vibrations of the unit. The production process of wind towers is managedgenerally the following: cutting by CNC cutting machine, thick plates should be beveled, plate rolling mill after rolling and forming, spot welding, positioning, after confirmation, welding of internal and external longitudinal seams, after roundness. inspection, if problems occur, perform secondary rounding. After the single-section cylinder is welded, a hydraulic unit is used to perform spot welding on the roller frame. After welding the inner and outer circumferential seams, the straightness and other tolerances are inspected. Once the flange is welded, the welds are carried out. After non-destructive testing and flatness inspection, sandblasting and painting, the installation of internal parts and inspection of the finished product are completed, and then transported to the installation site.