Hello, after calculation, the total weight of the 10 MW generator is 800 tons. A large wind turbine weighs between 400 and 500 tonnes. The blades of a 6 MW wind turbine weigh approximately 70 tonnes, the generator rotor weighs approximately 100 tonnes, and the generator stator weighs approximately 140 tonnes. Including the weight of the cabin and tower, it's about 460 tonnes, so it's 800 tonnes.
A 60 m wind turbine blade weighs three tonnes. A friend of mine drives a cart, and they often use carts to pull 200-foot wind blades. Once they encountered a large bumper along the way, they drove the car to the floor pump and weighed it. The result showed that it weighed three tons. Everyone knows that 60 m wind turbine blades are part of the three piles. I saw someone ask this question here, so I'll answer it here.
“The most difficult part of transporting wind energy equipment is transportingort the blades of the wind turbine. The blades are 50 to 60 meters long and weigh around 12 tonnes each. On this winding mountain road, it is really difficult. for transport workers. This is a huge challenge, which is why we use special vehicles such as blade lifting trucks to transport wind turbine blades, which can adjust the blades according to road conditions. "
Recently, at Dongfang Electric Dechang County Wind Power Company Liangshan) Co., Ltd., met the transport truck that was loading wind turbine blades and was about to Seeing that the wind blades that had been loaded on the vehicle could actually rotate and adjust their direction, Zhang Yong from the General Management Department Office answered the reporter's questions.