Hello, the following information is for your reference. The size of wind power base mold is mainly 10m to 20m, and the depth is mainly 2m to 3m. Due to its large size, it is mainly made of multiple steel. plates, so that it can be easily carried during transportation. And the steel plate can be disassembled into sheets during storage, which is convenient for transportation and saves space. The basic molds for wind power are generally round and square. In order to meet engineering needs, they can usually be customized and produced. Customers can choose a suitable model or directly provide mold drawings to the factory. by the customer. The wind power foundation that guarantees production can fully meet the needs of power generation projects. This type of mold is mainly produced by production cast on site. It is installed as a base in the foundation dug for pouring and plays the role of fixing the wind power generation equipment above. This can form the foundation base for the wind energy produced. More closely. Connect with the ground to achieve sufficient fixing effect. The wind power foundation base mold is a little different from most cast-in-place molds used. The main reason is that to ensure the strength of the foundation base, it is often necessary to first attach the cap steel bars and then put them together. the mold inside and outside the steel bars. Therefore, it is usually necessary to tie them well. The steel bars are then spliced piece by piece with the molds painted with a release agent. sprayed with release agent, it will easily stick to steel bars, resulting in loose connectione steel bars to concrete.
I don't know what your wind power foundation refers to
If it is the wind turbine foundation, there is no need to divide it . At least that's what I know. only one foundation, and there was never any need for a base for dividing the pits.
If it is the wind farm transmission line or on-site power collection line, it is no different from ordinary transmission lines;