Wind energy in a sentence

Introduction Wind power in one sentence: Wind power in one sentence is as follows: 1. Tonight, Typhoon “Racoon” landed in Zhongshan. The wind strength in the center of the typhoon reached level 12. When the typhoon arrived, it rained heavily and the sky turned into

Wind energy in a sentence

The sentences relating to the strength of the wind are as follows:

1 Tonight, Typhoon “Raccoon” made landfall in Zhongshan. The strength of the wind in the center of the typhoon has reached its level. 12. When the typhoon came, the rain There was heavy rain and the sky turned gray, as if it wanted to devour me.

2. Winter has just arrived and the wind is not so cold yet, but the wind is very strong. The tall trees beside the road were swayed from left to right by the wind, emitting moaning sounds from time to time. The dust on the street was flying, and the shredded paper scattered on the ground was carried to the sky by the wind, floating. high in the gray sky.

3. This is how the dandelion spreads its seeds in all directions with the help of the wind. Each seed will multiply and grow in every corner far from its mother. Of course, before long, the dandelions will be growing one after the other.

4. Use eo energylink to generate electricity can not only save energy, but also protect the environment.

5. The wind is blowing in the sky and the waves are starting, so you just have to smile and not worry. Yang Wanli?

6. This moving wind is so gentle and caring. The wind was not strong, but the poplar trees on both sides of the avenue not far away were stirred to produce a pleasant rustling sound. The fusion of touch and hearing becomes more and more intoxicating.

7. Strong winds stir up a large amount of floating sand, forming fierce wind and sand flow, which continuously erode the soil and cause drastic changes in the landscape.

8. The result of the experiment is that the wind-powered Chang'an ants are more intelligent, the water-powered Chang'an ants are stronger, and the human-powered Chang'an ants are stronger. and are the most law-abiding. This rThe result proved the wisdom of the emperor.

9. Spring is the beginning of a year's life cycle: in spring, the wind is strong, the climate is dry, and health care should focus on nutrition and protection of the liver. . Drink more water to replenish body fluids and promote metabolism, I wish you good health in spring!

10. You feed your children with your milk, you grow old with your hard work, you fight against the wind with your weakness, you turn the spring breeze into rain with your true love, you support the world. with your hands, and you only forget one person, it's yourself! Mother's Day, take care of yourself, Mom!

How to use electricity safely

1. Why does the light switch need to be connected to the live wire?

If the light switch is installed on the neutral line, even if the light does not turn onnot when it is off, the phase line of the lamp head will still be connected and people will wrongly think that the light does not light up and is out of power. In fact, the ground voltage at each point of the lamp is always a dangerous 220 volts. If people touch these live parts when the lights are off, an electric shock accident will occur. Therefore, various small-capacity single-phase light switches or electrical equipment switches can only ensure safety if connected in series on the live wire.

2. How to properly install the three-hole single-phase socket? For what?

Generally, single-phase electrical equipment, especially mobile electrical equipment, should use three-conductor plugs and corresponding three-hole sockets. There is a dedicated protective zero (earth) socket on the socket atthree holes. When using zero protection, some people often simply place this hole at the bottom of the socket. The terminal head is directly connected to the neutral wire of the socket, which is extremely dangerous. Because if the neutral wire of the power supply is disconnected, or the live wire (phase) and the neutral wire of the power supply are connected backwards, the metal parts such as the case will also carry the same voltage as power supply, causing an electric shock.

Therefore, the dedicated earth socket must be connected to the dedicated protective earth wire when wiring. When using zero connection protection, the neutral wire must be specially routed from the power end instead of using the neutral wire fed into the nearby outlet.

3. Why is it strictly forbidden to bury plastic insulated wires directly into walls?

(1) After along-term use of plastic insulated wires, the plastic will age and crack, and the insulation level will be significantly reduced when the line is overloaded or short-circuited for a short time. it is easier to accelerate damage to the insulation.

(2) Once the wall becomes wet, it will cause large area leakage and endanger personal safety.

(3) Plastic insulated wires are directly buried, which is not conducive to line inspection and maintenance.

4. Why Use a Leak Protector?

Leakage protector, also known as leakage protection switch, is a new type of electrical safety device. Its main uses are:

(1) Preventing electrical leaks caused by electrical equipment. and electrical circuits.

(2) Prevent mono electric shock accidentsphased during electricity use.

(3) Timely cut off single-phase ground faults during the operation of electrical equipment to avoid electrical fires caused by leakage.

(4) With the improvement of people's living standards and the continuous increase in the number of household appliances, when using electricity, personal electric shock and accidents are caused by defects in the electrical equipment itself, improper use. and unfavorable technical security measures. Fire accidents led to unjustified losses of life and property, and the emergence of leakage protection devices provided reliable and effective technology to prevent the occurrence of various accidents, cut off the power supply at time and protect equipment and equipment. personal safety.

5. What are the main causes of accidentsteeth linked to electric shock?

Statistics show that the main reasons for electrocution accidents are:

(1) Lack of knowledge of electrical safety, flying kites near high voltage lines, climbing high voltage poles. and dig the bird's nest; after the low-voltage overhead line is disconnected, the power is not cut off, and the live wire is picked up by hand; the damaged rubber cover of the knife switch is touched by hand; touched by hand.

(2) Violating operating procedures, connecting live electrical lines or equipment without taking necessary safety measures; touching damaged equipment or wires; connect live lighting devices; Energized mobile electrical equipment; Use wet hands to twist bulbs, etc.

(3) The equipment is notqualified and the safety distance is not sufficient; the grounding resistance of the two-wire-one-ground system is too large; the ground wire is not qualified or the insulation is disconnected; the wire is exposed, etc.

(4) The equipment is in poor condition. Strong winds cut lines or toppled poles and they were not repaired in time; the bakelite of the rubber cover of the knife was damaged and was not changed. time ; the motor wires were damaged, which stretched the case.It is loaded during the period; the porcelain bottle is damaged, causing the phase wire and traction wire to short circuit, and the equipment shell is charged.

(5) Other accidental reasons, walking at night and touching broken live wires on the ground.

6. What emergency measures should be taken in case of electric shock?

When an electric shock accident occurs, while ensuring safetyurity of the rescuer himself, he must first try to quickly turn off the power to the person who received the electric shock, then carry out the following emergency intervention. repairs.

(1) Remove tight clothing that restricts the electrocuted person's breathing.

(2) Check the mouth of the person who received an electric shock, clean the mucus in the mouth, and remove dentures if there are any.

(3) Immediate rescue on site. If breathing stops, use mouth-to-mouth artificial respiration. If the heart stops beating or shakes irregularly, artificial chest compression may be used. It should not be interrupted without reason.

If there is a second person present on the scene in addition to the first aid worker, the following work must be carried out immediately:

1) Provide first aid tools and equipment.

2) Dissuade the personthe inactive to leave the premises.

3) Keep the site with adequate lighting and air circulation.

4) Report to the leader and ask for a doctor to come to the rescue.

Experimental research and statistics show that if treatment starts 1 minute after electric shock, 90% of people can be saved; if treatment begins 6 minutes after the electric shock, there is only a 10% chance of recovery. survival; If you start resuscitation 12 minutes after the electric shock, the possibility of resuscitation is extremely low. Therefore, when you find someone being electrocuted, you must race against time and use all possible methods.

7. What steps can be taken to use electricity at home safely?

With the popularization of household appliances, it is crucial to correctly master the knowledge of usesafe electricity and ensure the safety of electricity use.

(1) Do not buy counterfeit and poor quality household products with the “Three Nos”.

(2) When using household appliances, there must be a complete and reliable power cord plug. Appliances with metal housings must be grounded for protection.

(3) Switches and fuses cannot be installed on the ground wire and neutral wire. It is prohibited to connect the ground wire to tap water or gas pipes.

(4) Do not touch live equipment with wet hands or wipe live equipment with a damp cloth.

(5) Do not connect wires indiscriminately or move live equipment casually.

(6) When inspecting and repairing household appliances, the power supplyique must first be unplugged.

(7) When the power cord of a household appliance is damaged, it should be replaced immediately or wrapped in an insulating cloth.

(8) When a fire occurs in household appliances or wires, the power supply should be disconnected before extinguishing the fire.

8. How to prevent appliances from burning?

The rated voltage of commonly used household appliances is 220 volts, and the normal supply voltage is around 220 volts. When the power voltage in the power line increases instantly due to natural disasters such as lightning and the three-phase load fails, If the balanced household line is in poor condition for a long time and the neutral line is broken, or if the voltage increases due to human improper wiring, etc., the voltage increases, which will increase the courant and will burn out appliances due to overheating. . To prevent household appliances from burning, we should start from the following aspects: first, try to disconnect the power supply when the electrical equipment is not in use; second, modify old and dilapidated household wiring; third, install a leakage switch with surge; protection.

9. How to choose fuses for residential use?

Fuses used in residential homes should be selected based on electrical capacity. For example, when using an electric meter with a capacity of 5 A, the fuse should be greater than 6 A and less than 10 A; if you use an electric meter with a capacity of 10A, the fuse should be greater than 12A and Less than 20A, that is, the selected fuse should be 1.2~ of the meter capacity electric 2 times. The selected fuse must comply with regulations, and multiple small capacity fuses cannot be used together, nor can copper wires be used instead of fuses.

10. What are the basic requirements for leak protection devices?

Technically, the following requirements must be met:

(1) The sensitivity of the protection against electric shock must be correct and reasonable. Generally, the starting current should be around 15. ~30 mA.

(2) The action time of protection against electric shock should generally not be more than 0.1 seconds.

(3) The protector must be equipped with the necessary monitoring equipment to prevent loss of protection when the operating state changes. For example, for voltage type electric shock protectors, a neutral grounding device must be installed.

11. How to predictener electrical fire accidents? What to do after a fire?

First of all, when installing electrical equipment, quality must be guaranteed and all safety and fire protection requirements must be observed. Qualified electrical equipment must be used. Damaged switches, lamp holders and wires cannot be used. The wire joints should be firmly connected according to the prescribed connection method and wrapped with insulating tape. Tighten the screws on the pile heads and wiring terminals to avoid poor contact due to loose wiring. Once the electrician has installed the equipment, it does not mean that it can be done once and for all. During use, if the user finds that the wiring of the lamp holder or socket is loose (especially the socket wiring of mobile electrical appliances is easy to install). loose), has a bad contact or overheating, he must find an electrician to take care of it quickly.

Second, do not place oil, cotton, sawdust, wood and other easy-to-stain items near low-voltage lines, switches, sockets and fuses .

Before an electrical fire, there is a precursor to which special attention should be paid. That is, the outer insulating coating of the wire will first be burned due to overheating, giving off an unpleasant smell of burning rubber and burning plastic. Therefore, when you smell this smell, you should first think that it may be caused by electrical reasons. If no other reason can be found, you should immediately turn off the power and turn off the power until the cause is discovered and properly treated. before turning off the power supply.

In the event of fire, whether caused by electricity oron, you must first find a way to quickly cut off the power supply to the fire area. Because, if the fire is caused by electrical aspects, cutting off the electrical supply will also cut off the source of the fire.Source of fire; if the fire is not caused by electrical aspects, the insulation of the wires will also be burned. If the power is not turned off, the burned wires will cause short circuits and cause a wider range of wires to catch fire. After an electrical fire occurs, cover it with earth, sand or a fire extinguisher, but foam extinguishers should not be used, so this extinguishing agent is conductive.

12. Common sense for safe use of electricity at home

(1) Every family should have some necessary electrical tools, such as electrical test pens, screwdrivers, glue pliers, etc. . ., and must also have various specificationsns of fuses and fuses suitable for use in household appliances.

(2). Each household must be equipped with a main fuse in front of the electric meter, and a main switch and a leakage protection switch behind the electric meter.

(3). It is strictly forbidden to use copper or iron wire in place of a fuse, under any circumstances. The size of the fuse must match the electrical capacity. When replacing the fuse, you need to remove the porcelain box cover and replace it. Do not connect the fuse directly into the porcelain box. Do not replace the fuse while the unit is powered on (without opening the knife switch).

(4) Once the fuse is blown or the leakage switch is tripped, the cause must be found before the switching power supply can be turned on again. Under no circumstances should a wire be used to yardT-circuit the fuse or press the trip mechanism of the leakage switch to force power transmission.

(5) When purchasing household appliances, you should carefully check whether the technical parameters (such as frequency, voltage, etc.) contained in the product manual meet local requirements regarding electricity. It is necessary to know how much energy is consumed and whether the existing power supply capacity of the house meets the requirements, particularly whether the wiring capacity, plugs, sockets, fuses and meters meet the requirements .

(6) When household power distribution equipment cannot meet the capacity requirements of household appliances, it must be replaced and modified, and improvised use is strictly prohibited. Otherwise, overload operation will damage electrical equipment and couldcause an electrical fire.

(7) When purchasing household appliances, you should also understand its insulation performance: whether it is general insulation, reinforced insulation or double insulation. If leak protection relies on grounding, a ground wire is essential. Even for electrical equipment with reinforced insulation or double insulation, it is also beneficial to have protective earthing or protective zero connection.

(8) For household appliances with electric motors (such as electric fans, etc.), you also need to know the thermal resistance level and whether they can work continuously for a long time . Pay attention to the heat dissipation conditions of household appliances.

(9) Before installing household appliances, you should check the product instructionsfor installation environment requirements. Take particular care, if possible, not to install household appliances in a hot, humid, dusty or flammable or explosive location. locations, corrosive gas environment.

(10). When laying indoor wiring, phase lines and neutral lines should be clearly marked and consistent with the wiring of household appliances, and should not be incorrectly connected.

(11) Household appliances must be connected to the power supply using switches or connectors that can be unplugged. Direct insertion of wires into socket holes is prohibited.

(12).All household appliances which require protective earthing or safety earthing shall not use three-prong plugs and three-prong sockets and sockets with two eyes.Replace, what enteredines a gap in the ground line (or zero).

(13). It is best not to have joints in the middle of household wiring. Where joints are required, they should be firmly contacted and wrapped with electrical tape, or use a porcelain junction box. It is recommended to use medical tape instead of electrical tape to wrap joints.

(14) The connection between wires and switches, knife switches, fuse boxes, lamp holders, etc. must be firm and reliable, with good contact. Multi-glue soft copper wire connectors should be twisted together then placed under the screw joint of the connector to prevent the thin strands from spreading out and hitting another connector and causing a short circuit.

(15) Household wiring should not be laid directly on flammable building materials. If you must wire to wood, you must useUse porcelain beads or porcelain clips to pass through wooden planks. Plastics and other flammable materials should not be used as decorative materials.

(16) Although the ground or neutral wire is not charged normally, if there is leakage after disconnection, the shell of the electrical appliance will charge in the event of a short circuit , a large current will flow through; the earth wire. For safety reasons, the size of the ground (neutral) wire should not be smaller than that of the phase conductor, and no switches or fuses should be installed in it, and there should be no connectors.

(17). The ground wire should not be connected to the water pipe (because the current water pipe joints are plugged with insulating tape, which has no grounding effect, it should not be connected gas); hose (to avoid sparks) It may cause a gas explosion); he must notnot be connected to the ground wire of the telephone line (to prevent strong electricity from channeling weak electricity); it must not be connected to the down conductor of a lightning rod); protective wire (to prevent counter-attacks during lightning).

(18). All switches, knife switches and fuse boxes must have covers. Aged or incomplete bakelite lids should be replaced. If it is dirty or wet, it should be wiped dry before use.

(19) Do not drag the power cord across the floor to avoid tripping over the power cord and damaging the insulation.

(20) Before trying any household appliances, you should refer to the instructions, place all switches and buttons in the original off position, then operate according to the start-up sequence and shutdown required by the instructions. If there are moving parts such as ventilatesWhen swinging, sufficient space for movement should be provided in advance.

(21) If an abnormality such as sparks, smoke or burning smell is detected after the household appliance is turned on, it should be stopped immediately, cut off the power supply and carry out an inspection.

(22). Be sure to turn off the power supply when moving household appliances to avoid electric shock.

(23). Flammable materials should be kept away from heating appliances. Electric stoves, heating pans, electric irons and other heating appliances should not be placed directly on wooden boards to avoid the risk of fire.

(24). It is prohibited to touch the live switch with wet hands; it is prohibited to remove or plug in the power plug with wet hands; remove or plug in thepower plug; nor use wet hands to replace electrical components or bulbs.

(25). For household appliances often used by hand (such as hair dryers, soldering irons, etc.), do not wrap the wire around your hand.

(26). For household appliances that come into contact with the human body, such as electric blankets, electric oil caps, electric heating shoes, etc., use Before contacting the human body, a power test should be carried out to s make sure there are no leaks.

(27) It is prohibited to move household appliances by pulling wires; It is prohibited to remove plugs by pulling wires.

(28) When using household appliances, plug in the socket on the non-powered side first, and finally turn off the switch or plug in the socket on the powered side, do the reverse; , first open the sockete on the powered side knife switch or unplug the live side plug, then unplug the non-powered side plug (if necessary).

(29). When it is necessary to cut the power wire in an emergency, insulated electrician's pliers or tools with insulated handles should be used.

(30) When rescuing an electric shock victim, first disconnect the power supply or use a wooden board or insulating rod to open the power cord. Do not drag the electric shock victim directly with your hands to avoid the chain. electric shocks.

(31). Except for appliances such as refrigerators, household appliances should be turned off easily, especially electric heaters, to avoid long-term heating and fires.

(32). It is strictly prohibited to use the bed switch. Except for coverss heated, do not bring live electrical equipment to bed or near the sleeping human body. Even if you use an electric blanket, if it is not necessary to keep warm all night, it is recommended to turn off the power after heating to ensure safety.

(33) If household appliances are burned, smoking or on fire, the power supply must be immediately cut off and water or foam extinguishers must not be sprayed.

(34) Inspection of the insulation of indoor wiring and electrical equipment should be carried out regularly, and any damage should be wrapped with insulating tape in time.

(35). For household appliances that have been reused before the rainy season or have not been used for a long time, the insulation resistance measured with a 500V megger should not be less than 1MΩ before it can be used.considered well insulated and can be used normally. If a megger is not available, at least use an electrical test pen to regularly check for leaks.

(36). Keep frequently used appliances dry and clean. Do not wipe the surface of household appliances with corrosive or conductive liquids such as gasoline, alcohol, soapy water and detergent powder.

(37). If a household appliance is damaged, please take it to professionals or send it to a repair shop for repair; non-professionals are strictly prohibited from opening the casing of household appliances when the power is off; on.

5. Principles of safe use of electricity

(1) Do not approach or touch objects charged with high voltage (outdoors, high-voltage lines, next to transformers). objects charged at low voltage. ?

(2) Does not turnz Do not operate the switch with wet hands to insert or remove the plug. ?

(3) When installing and repairing electrical appliances, you must wear insulated shoes, stand on the insulation, and turn off the power supply. ?

(4) It is prohibited to use copper wire instead of a fuse, and it is prohibited to use rubber glue instead of electrical insulating tape. ?

(5) Install an electric shock protector in the circuit and check its sensitivity regularly. ?

(6) During thunderstorms, do not use radios, VCRs and televisions, and unplug the power plugs and TV antenna plugs. Do not use the phone temporarily. If you must use it, use the hands-free function. ?

(7) It is strictly prohibited to connect electrical wires indiscriminately without permission, and students are prohibited from using electric cableselectric heaters, “heaters” and other electrical appliances in the dormitory. ?

(8) Do not fly kites or play ball games under baskets or electrical wires.

1. Other precautions

The safe voltage for humans is not more than 36 volts

Do not touch the metal rod of the pen tip when using the test. pen

< p>High-power electrical appliances must be grounded

Do not use your body to connect the live wire and ground wire

The total power of the electrical appliance used cannot be too high, otherwise it will cause excessive current and cause fire.

When someone receives an electric shock, do not use your body to pull it. You must immediately turn off the main switch and then. use a dry wooden stick to separate the person from the wire

  • Popular Focus
  • Where is the cheapest battery wholesale?

    Where is the cheapest battery wholesale in Tangxia, Sanyuanli, Baiyun District? There is an enterprise specializing in the independent production of electric vehicles in Tangxia, Sanyuanli, Baiyun District, Baiyun Sanyuanli Avenue, Baiyun Sanyuanli Street
    08-02
  • Four 3.7V lithium batteries in series and parallel produce 7.4V/4.4A. How to reduce it to 4.8V/4.4A?

    Four 3.7V lithium batteries in series and parallel produce 7.4V/4.4A. I personally think it is impossible to reduce it to 4.8V/4.4A. Because the discharge platform of lithium batteries is generally set
    08-10
  • What are the materials of the negative electrodes of lithium batteries?

    What are the materials of the negative electrodes of lithium batteries? The main commercial applications of lithium batteries include graphite, which is a sheet of copper used to guide current and which does not react. another safe
    08-02
  • The difference between 18500 and 26500 batteries

    What is the difference between 18500 and 26500 batteries? The answer above is 18650. The person asking the question should ask what is the difference between 18505 and 26500 batteries. In the case of Fuant ER1
    08-02
  • What does 3.7V 80mAh written on a lithium battery mean?

    What does 3.7V 80mAh written on a lithium battery mean? 3.7 V, 80 mA = 0.08 A, H means 1 hour, or 3600 seconds. Taken together, it is
    08-02
  • How long does a lithium battery (cell phone battery) last?

    How long does a lithium battery (cell phone battery) last? The lifespan of mobile phone batteries, under normal conditions of use and without serious impact, the lifespan set by the manufacturer must be 5 years.
    08-02
  • Will lithium batteries explode when charging?

    Will lithium batteries explode when charged? Will lithium batteries explode when charged? Lithium battery explosions usually occur during the charging process, because the negative electrode material of lithium batteries is graphite or other carbon materi
    08-02
  • Parameters of lgdas31865 lithium battery

    Parameters of lgdas31865 lithium battery The parameters of lgdas31865 lithium battery are as follows: LGDAS31865 is a model 18650 lithium battery with a capacity of
    08-02
  • What are the main components of lithium battery electrolyte?

    What are the main components of lithium battery electrolyte? The composition of lithium battery electrolyte is shown below. 1. Ethylene carbonate: molecular formula C3H4O3. Colorless transparent liquid (>35℃), room temperature
    08-02
  • Who are the lithium battery manufacturers in Shandong?

    What are the lithium battery manufacturers in Shandong? Shandong Shengyang Power Supply Co., Ltd. and Shandong Weineng Environmental Protection Power Technology Co., Ltd. 1. Shandong Shengyang Power Supply Co., Ltd. is located in Shengyang, Qufu City.
    08-02
  • Types of drone batteries available in 2024

    Part 1. Types of drone batteries available in 2024In 2024, drone batteries have advanced significantly, offering a range of options to cater to various needs in
    07-30
  • How long does it take to charge 26650 battery?

    How long does it take to charge a 26650 battery? The charging time for a 26650 battery is generally between 3 and 6 hours, but the precise time depends on the power of the charger and the capacity of the battery. in general
    08-02
  • For what?Sure, here's an article based on the phrase "For what?

    The simple yet profound question, "For what?" often serves as a gateway to deeper reflections on purpose and intention. It is a query that invites us to delve into the reasons behind actions, decisions, and circumstances that shape our lives and the wor
    08-02
  • Choosing the Right Cart Battery

    This comprehensive guide will walk you through everything you need about cart batteries, from understanding different types to making an informed purchase decision.
    08-02
  • 30mAh~500mAh 3.7 V Li-ion Battery

    Welcome to Ufine's collection of 3.7V lithium-ion batteries ranging from 30mAh to 500mAh. Explore a diverse range of compact and lightweight batteries suitable for various electronic devices,
    08-02
  • Here are 10 essential facts about drone batteries for 2024.

    10 Key Facts About Drone Battery for 2024 In 2024, drone batteries have advanced significantly, offering a range of options to cater to various needs in the consumer, commercial, and industrial sectors. Below are the primary types of drone batteries avai
    08-02
  • Could you please explain the difference among IMR, ICR, INR, and IFR 18650 batteries?

    What is the Difference Between IMR, ICR, INR, and IFR 18650 Battery?In 18650 batteries, discerning the differences among IMR, ICR, INR, and IFR types is fundamental for tailored and efficient battery usage. These distinct
    08-02
  • Safety considerations for cart batteries

    Selecting the ideal cart battery is crucial for ensuring optimal performance and longevity of your electric vehicle or vaping device. This comprehensive guide w
    08-01