If you are not a repairer, it is not recommended to disassemble it yourself. It is easy to disassemble and improper installation will result in larger gaps.
1. Open the engine hood completely.
2. Remove the retaining clip (A) on the top of the front bumper decorative panel.
3. Remove the front bumper decorative panel retaining screws (A) and clips (B) from under the front bumper decorative panel.
4. Disconnect the front fog light harness connector (left/right).
5. Remove the headlight washer nozzle hose connector. See Hydraulic Arrangement
6. Remove the fender retaining clip to access the front bumper trim retaining screw (A), then remove the front bumper trim retaining screw (left/right).
7. Pull the bumper trim panel toward the side of the car to separate the trim panelbumper structure of the bumper side supports (left/right).
8. Separate the front bumper trim panel from the bumper bracket (A) (left/right).
9. Remove the bumper decorative panel assembly.
■ Note ■When removing the bumper trim, two operators are required to avoid falling.
10. After removing the bumper decorative panel, remove the following parts.
License plate bracket
Front bumper side bracket (left/right)
Front bumper mounting bracket
Front bumper molding (left/right)
Bumper trim A
Bumper trim B
Nozzle headlight washers (left/right). See Removal and Installation.
For the front fog light (left/right), please refer to the Removal and Installation section.
Front fog light bezel (left/right) 11. Remove the deviceenergy absorption function of the bumper.
12. Use a power tool to remove the bumper brace nut, then remove the bumper brace. 13. Remove the bumper bracket mounting bolts (left/right), then remove the bumper bracket (left/right).
The importance of the wind gun bracket is to improve the efficiency and stability of the wind turbine. According to relevant public information, the wind cannon bracket is placed at a high place to avoid the interference of wind power by tiny obstacles in the air at ground level, which allows the wind turbine to absorb more stable and stable wind energy more easily. Continuous wind energy. The wind cannon bracket is a bracket used to fix wind turbines. It can place the wind turbine at a high location to better capture wind energy and convert it into electrical energy.