The first step is to purchase a plug. The power of the socket depends on the power of the device you want to carry. First, use a razor blade to open the plug cover that came with the generator. Remove the cover again and you will see that there are three pillars inside the generator plug. Two of the pillars are the same length and one pillar is much longer than the other two pillars.
The second step is to connect the wiring to two pillars of the same length. Since the outlet has two wires, one is the neutral wire and the other is the live wire. At this point, you just need to replace the plug in the regular outlet with the special generator plug. At this point, simply connect the wire from the outlet you purchased to the generator plug. The two wires are connected to the two pillars circled in red.
The last step is to use the two screws on the pillar tosecure the wire. If you want to connect the generator power to the mains, you need to connect the generator plug wire. mains and you do not need to buy a socket at the moment.