Legal analysis: "Technical Regulations for Wind Farms Connected to Electric Power Systems" (GB/T 19963-2011 replaces GB/Z 19963-2005) by the General Administration of Quality Supervision , inspection and quarantine of the people. Republic of China and National Standards Administration of China Published on December 30, 2011 and implemented on June 1, 2012. This standard specifies the technical requirements for wind farms to be connected to the power system.
“Technical regulations for wind farms connected to electric power systems, part 1: Onshore wind power” (GB/T 19963.1-2021 replaces GB/T 19963-2011) by the Administration of State for Market Regulation and the National Standardization Administration Published on August 20, 2021, implemented on March 1, 2022 and drafted in accordance with the provisions of GB/T1.1-2020 “Guidelines for standardization work, part 1 : Structure and rules ofdrafting standardization documents”. This document focuses on the technical requirements for onshore wind grid connection and clarifies the basic technical requirements that power grid companies and power generation companies must meet during the onshore wind grid connection operation1 for guarantee the security and stability of the electrical and terrestrial network. wind farms are operating.
Legal basis: Article 1 of the “Technical regulations for wind farms connected to electrical systems” This standard specifies the technical requirements for wind farms connected to electrical systems. This standard applies to newly built or expanded wind farms connected to the electrical system via voltage lines of 110 (66) kV and above. For wind farms connected to the electricity system via other voltage levels, we can refer to the implementation.
"Technical regulationsfor wind farms to be connected to power systems Part 1: Onshore wind energy" Article 1 This standard specifies the technical requirements for onshore wind farms to be connected to power systems. This standard applies to newly built or renovated (expanded) onshore wind farms ) connected to the power system via voltage lines of 110 (66) kV and above For onshore wind farms connected to the power system via other voltage levels, reference can be made to the implementation
.