How to disassemble and assemble the Refeng S7 generator belt?

The disassembly and assembly method of the Refeng S7 generator belt is as follows: 1. Lift the vehicle and remove the right front wheel blade liner 2. Remove the generator belt and belt tensioner of the generator 3. Loosen and unscrew the crankshaft pulley screw; ; 4. Open the engine compartment cover and remove the kettle; 5. Remove the protective cover on the motor fixed bracket belt. 6. Unscrew the generator mounting screw and remove the generator. 7. Remove the cylinder block bracket; the crankshaft pulley; 8. Turn the crankshaft to the cylinder top dead center position and mark it. 9. Remove the old belt, replace it with a new one and install it in sequence; The generator belt is an important part of the engine's gas distribution system. It is connected to the crankshaft and associated with a certain transmission ratio to guarantee precision.n intake and exhaust times. The upper part is connected to the engine timing wheel. cylinder head, and the lower part is connected to the crankshaft timing wheel.