Installation methods and steps of electric floor fan:
1. Chassis Installation
First remove the elbow screw and pressure plate from the column, insert the column into the base. , and place the pressure plate on the bottom of the chassis, use the angle lock screw to tighten it clockwise.
2. Overall installation
(1) First loosen the lifting lock nut, remove the lifting pipe from the column, and then use the lifting lock nut to lock the goods.
(2) Loosen the clamping nut at the bottom of the fuselage, insert the fuselage into the riser tube and tighten the clamping nut.
(3) Loosen the lifting lock nut, adjust to the required height and tighten the nut.
3. Install the rear grille
Unscrew the fan fixing nut from the motor shaft, then unscrew the triangular nut, then install the rear grille.
4. Install the fan blades
When installing the fan blades, the groove on the back of the fan blades should be stuck on the motor limit pin, and then tighten the nut. fastening counterclockwise.