This reason is a bit broad. Discontinuation is a possibility. The variable pitch system may cause the blade angle to reach 90 degrees, which refers to the minimum upwind surface area of the blade, so the blade cannot fully reach. face the wind, which makes the wind speed still cannot rotate after reaching the rated wind speed, it is also possible that the yaw system prevents the blades from facing the wind and the wind speed in winter is the same as the wind speed; in summer, but the blades can rotate in winter, but they cannot rotate in summer, because in winter, the temperature is low and the air density is high. In summer, the temperature is high and the air density is low. what we Northeasterners often say: the wind in winter is strong, but the wind in summer is not strong.
How to use the wind turbine in Minecraft Industry 2
I remembercome that there are two things, one is kinetic energy and the other is a wind turbine. put together. Otherwise, try to see if a wind turbine can produce electricity. There must be a rotor inside, like a fan page. Then place the wind turbine at a higher location and place the rotor. If the rotor moves, it means it is spinning.
The higher the place, the faster it spins and the more electricity it emits.
If you want ic2 wind power, you need to prepare it
Wind kinetic power generator, kinetic power generator and polyester yarn (it is recommended to use gold or glass, but you can use copper at the beginning (top), a rotor (actually iron is enough at the beginning, but carbon can be used at a later stage, around 36 coal blocks, and you can actually get it quickly. Don't use refined wood or iron, it's wasteful.)
First, open F3 in the j.had and check the contact details. The Y axis points to 160 and start building the wind power generation system at your feet.
I suggest you make a powerful jetpack then go up there, otherwise it will be really troublesome. .
Don't forget to place the generator then the wind turbine facing the wire. Otherwise it won't work and I don't know if it will explode. If you have installed an electrical network, be careful when installing it, as there may be an electricity leak. .