Wind lamp is a kind of lighting equipment that uses wind energy to generate electricity. It can adjust energy production and lighting duration based on wind strength. The following explains how to set the timing function of the wind lamp.
First of all, wind lamps are usually equipped with wind speed sensors that can monitor wind strength in real time. Through the wind speed sensor, we can get the current wind speed data.
Second, based on wind speed data, we can set different wind speed thresholds. When the wind speed is lower than the set threshold, the wind power generation light will stop generating electricity and enter sleep state to save energy. When the wind speed is higher than the set threshold, the wind lamp starts to produce energy.electricity and adjusts the amount of power generation based on wind speed.
Then, depending on the amount of energy generated, we can set different lighting durations. When energy production is low, the lighting duration can be shortened accordingly to ensure efficient energy use. When the power output is high, the lighting duration can be extended accordingly to meet the lighting needs.
In addition, the timing function of the wind lamp can also be adjusted according to different seasons and weather conditions. For example, in summer and sunny weather, the wind is strong and the lighting duration can be extended appropriately, while in winter and rainy weather, the wind is weak and the lighting duration can be shortened appropriately.
Finally, in order to ensure the normal operation of the wind lamps, aRegular inspection and maintenance of equipment is necessary. For example, cleaning wind turbine blades, checking battery charge and performance, and maintaining the accuracy of wind speed sensors.
In short, by setting thresholds based on wind speed data, adjusting power output and lighting duration, as well as adjusting based on seasons and conditions weather, the timing function of wind lamps can be adjusted effectively to achieve efficient use. energy and satisfying lighting needs.
Install a 36V voltage stabilizing charging circuit in front of the lithium battery and connect it to a 36V or higher solar panel.
Connect the two positive and negative wires to the battery, connect the switch, connect it to the 36V LED light and turn it on at night (or connect it to a timer circuit to achieve a communicationautomatic utation).