The Dyson Sphere project has been officially released on the Steam platform. Some players are not familiar with the basic gameplay of the opening of the game. Here we will share with you how to add the first points and building ideas to the beginning of the Dyson. Sphere Project
Opening the Dyson Sphere Project Add points from the start of the game and share construction ideas
First we disassemble the seat at the beginning, immediately dig iron and copper, search for electromagnetism, then tap the planet in the lower left corner to enter the star map mode
p>Drag with the middle key to find the area rich in copper and iron ( copper ore and iron ore should be relatively close)
Create a mining machine and a wind power plant
Ore next to the Ji'an iron mine, then install a wind turbine
You can see that the power supply is 70%, but that's okay, as long as you can dig it
After digging 50, take it down and install it next to the copper mine, the same way , take it apart after digging 50
Turn off another 4 mining machines and 10 wind generators (you can do less, I have OCD)
Put in each copper ore and 2 iron mining machines and wind turbines form an electrical network. At the same time, search in order: logistics, furnace.
After collecting the ore, find a coal mine, install the mining machine in the bag next to the coal mine, and install a wind turbine Power supply
Just burn coal to power the mecha at the start. Before that, if the mecha runs out of energy, burn oxygen rods
Research all technologies from step #1 (except extraction of thewater)
Remove the iron ore machine to the production line to feed 8 furnaces, 5 iron ingots and 3 magnets
The extraction machine production line copper is removed to feed 4 furnaces, all copper ingots
The iron ingot production line is used to make gears for a production machine and is stored in the second floor warehouse . The remaining iron ingots and copper are used for 2 productions. The machine removes the chip.
The magnetic wire is removed and the copper is used for the two production machines to remove the coil
The chip wire and the coil wire are removed for backup
Search machine manufacturing 9 They are arranged in a row, and the bobbin line and chip line pass through the two sides of the search machine respectively. The first 6 machines are making blue sugar and the other three are waiting.
Build a co-directional conveyor line outside the coil line. backup
p>
All blue sugar making machines are connected with filters to the backup line apart from the coil line
The backup line s 'extends to the last search machine,< /p>
The last three Put the standby machine into search mode and connect it to the blue sugar line
The end of The blue sugar line is connected to the warehouse to prevent the blue sugar from overflowing and reducing efficiency during standby
Blue sugar searches for graphite and steel
p>
Try to fly as soon as possible 2
How fast can the wind turbine reach 220V
The resistance of the blades to drive the rotor to rotate is greater than the cutting reaction force of magnetic lines of force, and the difference between the two The proportion is not very clear. The reaction force mmagnetic should only represent a very small proportion. The rotor of the Goldwind direct drive unit is made of magnetic steel and the stator is a coil. The specific weight is unclear. According to my estimation, the stator has a greater mass. . Copper
It depends on the number of poles of your generator.
2-pole generator, 3000 rpm
4-pole generator, 1500 rpm
6-pole generator, 1000 rpm
< p>8 10-pole generator, 750 rpm10-pole generator, 600 rpm
12-pole generator, 500 rpm
Generator generator 20 poles, 300 rpm
30 pole generator, 200 rpm
40 pole generator, 150 rpm
60 pole generator, 100 rpm /min
100 pole generator, 60 rpm
200 pole generator, 30 rpm