No, wind power generation converts wind kinetic energy into mechanical kinetic energy, and then converts mechanical energy into electrical kinetic energy. This is wind energy production. The principle of wind power generation is to use wind energy to rotate the blades of the wind turbine, then use a speed multiplier to increase the rotation speed to induce the generator to produce electricity. According to current wind turbine technology, electricity production can begin at a breeze speed of around three meters per second (the degree of breeze). Wind energy is becoming a craze worldwide because it does not require the use of fuel and does not produce radiation or air pollution.
The devices needed to produce wind energy are called wind turbines. This type of wind turbine can be roughly divided into three parts:the wind wheel (including tail rudder), generator and iron tower. (Large-scale wind power plants basically do not have tail rudders. Generally, only small power plants (including domestic types) have tail rudders.)
The wind wheel is a component important which converts the kinetic energy of the wind. in mechanical energy. It consists of two (or more) propeller-shaped wheels. When the wind blows toward the blades, an aerodynamic force is generated on the blades to rotate the wind wheel. The blade material requires high strength and light weight. Currently, it is mainly made of fiberglass or other composite materials (such as carbon fiber). (There are also vertical wind turbines, S-shaped rotating blades, etc., which have the same function as conventional propeller-type blades)
Since the speed of the wind turbine isrelatively weak and the magnitude and direction of the wind force often changes, making the speed unstable. Therefore, before operating the generator, a gearbox should be attached to increase the speed to the rated speed of the generator, and a speed regulating mechanism should be added; to keep the speed stable, then connected to the generator. In order to keep the wind rotor always aligned with the wind direction to achieve maximum power, a tail rudder similar to a weather vane must be installed behind the wind rotor.
Are all wind turbine inverters equipped with a single configuration?
Yes, absolutely ok, you have to understand the balance of power.
2000W wind power means that 2000W of electricity can be generated at the rated wind speed. Wind power changes all the time and the actual power output changes too. The chaThe main source of the generator is the battery. and it charges the battery.
The 5000W inverter means it has the highest efficiency at 5000W power. Of course, it can also support loads below 5 000 W. The power of the inverter depends on the battery power. The battery is powered, the inverter will have power output. The battery If the power is insufficient, the inverter will shut down. So don't load your load too big. If you need full power, please limit the power. full power time and check the battery voltage. Once the battery power is more than 15% lower than the rated voltage, stop powering the battery to avoid damage to the battery.
You adjust the inverter load according to the daily wind strength and the battery charge level, so that the battery is powered every day and cannot loseof power. If the battery loses power frequently, it will be easily damaged.
Generally speaking, it is equipped with a single inverter. There are specialist manufacturers for small power inverters, called high power wind inverters. are all converters
If you want to know more or need to purchase, please call us.
Tel;0531-88637095 Manager Li