The gasoline generator is a gasoline engine plus gasoline; diesel generator set is diesel engine plus diesel; the gasoline generator is small in size, light in weight and easy to move; has high power, sufficient power, wide range of power selection, and can For longer continuous work, etc., you can search for Daze Power Sun Wei
Gasoline Generator
Diesel Generator
Gasoline Power Generation How to use the generator
The gas damper of the generator must be open. The principle is that a large amount of fresh air enters the carburetor and mixes with gasoline to form a mixture of a certain proportion. Then, after entering the cylinder and being compressed by the piston, the mixture is ignited by the spark plug. The detonated mixture generates enormous energy to push the piston to continue working. Whenthe damper is closed, a large amount of air will not enter and a huge amount of energy will not be generated. Closing the damper simply serves to prevent a large amount of cold air from entering when the cold machine starts. A small amount of air will easily start the machine. After starting the machine, you need to open the damper and let the machine run continuously at high power.
Gasoline engines are widely used in low-power machines such as passenger cars, motorcycles and chainsaws due to their light weight, low manufacturing cost, low noise and their good starting performance at low temperatures. With the continuous and stable development of gasoline engines supporting engines (cars, motorcycles, small power generation equipment, garden machines, etc.) in the future. ), the gasoline engine industry still has a lot of marginand development.
One million car purchase subsidies
When you buy a new gasoline generator, you should check whether it has any defects in appearance, if there are certificates, instructions, tools and sheets.
First add the engine oil and gasoline. (The engine oil must be filled to the designated position, otherwise the machine will not operate if not filled.)
The gas tank switch must be turned to the position the power off switch must also be turned. to the start position and the power output switch should be turned off.
Turn the damper to the closed position (cold start, turn the damper to the closed position for easier starting).
Pull the starter pulley (first pull it several times to let the gasoline flow into the carburetor), and finally pull hard on the starter pulley (if it is of a delectric start, the engine can start directly).
After starting the machine, turn the damper to the opposite position (i.e. open the damper). Check whether the machine is operating normally, whether the voltage is within the normal range, whether there are any abnormal noises coming from the machine, etc.
Close the switch and send power.
Taiyuan Anji Lida Mechanical and Electrical Equipment Co., Ltd.