Coal Mine Safety Regulations Distance Requirements Between Dryers

Introduction Coal mine safety regulations require that the distance between air ducts should not exceed 5 meters. According to the official website of the Coal Mine Safety Production Network, the "Coal Mine Safety Regulations" stipulate the distance between the outl

Coal Mine Safety Regulations Distance Requirements Between Dryers

No more than 5 meters.

According to the official website of the Coal Mine Safety Production Network, we learned that the "Coal Mine Safety Regulations" stipulates that the distance between the conduit outlet air and the working face of the excavation is clearly stipulated in the operating procedures according to the specific circumstances, but the maximum should not exceed 5 meters. The air duct is anti-static and flame retardant. The distance between the mouth of the air duct and the excavation work surface as well as the installation of local fans and air ducts for mixed ventilation are clearly stipulated in the operating procedures.

What must be used underground must be made of fireproof materials

Calculate. Flame retardant air duct fabric used in underground mines other than coal belongs to the category of safety protection installations.security of mining production and can be used as a security expense. Mines are a high-risk production environment. In order to protect the lives and property of miners, a series of safety protection measures should be taken, including the installation of flame-retardant air duct fabrics and other protective facilities to reduce the occurrence of mines. fires, explosions and other safety accidents. Therefore, flame-retardant air duct fabric is a necessary equipment for mining production safety, and its cost can be included in the cost of mining production safety to ensure the safety of people's lives and property. minors.

Features of air ducts

Cables, air ducts and conveyor belts.

The underground environment is complex, with adverse factors such as high temperature, high humidity, corrosion, etc., and the use of maflammable materials. Once an accident occurs, it will not only endanger people's safety, but also. also cause serious damage to equipment and increase maintenance costs. Cables, air ducts and conveyor belts are all made from flame retardant materials. The use of flame retardant materials can effectively reduce the risk of fire and ensure the safety of underground operations.

The latest standard in double strength wind cylinders in coal mines

It is made of seamless cylinder blanks and steel wires to carbon spiral springs, using advanced heat sealing technology. It has the characteristics of good suction effect, easy turning, convenient transportation and storage (can be folded) and long service life. As shown in the picture above: Usage: Flexible pipes used in mcoal mines, tunnels, subway projects and underground to locally guide air flow in a certain direction.

Classification: positive pressure air duct, air duct negative pressure; three ventilation duct

Variety and material: According to the covering material, the hair dryer is divided into rubber coated cloth hair dryer, plastic coated cloth hair dryer and plastic coated cloth hair dryer in rubber-plastic coated fabric. It is anti-static and heat resistant.

Production execution standards: Standard number: MT164-2007 Huai Standard, Standard number: MT165-2007 Huai Standard. "Rubber or plastic coated fabric dryer" specifies the classification, structure, technical requirements, testing methods, inspection rules, packaging, marking, transportation and storage of air ducts. air in fabric coated with rubber or plastic.

Packaging, storage and translogo port 1. Compress the hair dryer in axial direction to less than 700mm in length, fix it in 3-4 places with ropes or cloth strips, then pack it with good materials quality. wear resistance.

2. During transportation, the hair dryer must be protected from mechanical shock and friction, as well as from sun and rain. 3. Products should be stored in a well-ventilated warehouse, and the stacking should not be too high to avoid affecting the quality of use. Used air guides should first be rinsed and dried, then folded and stored. Avoid contact with substances that may damage the quality of rubber and plastic. Avoid direct sunlight and rain. The storage temperature should be between -15℃ and 35℃, the relative temperature should be between 45-75%, and it should be 1m away. of the heat source.

4. Under the conditions of transport and storage specified, the flame retardant and antistatic properties of the product must comply with the provisions of this standard within one year from the date of production.

5. The air guide duct must have appropriate specifications according to the tunnel requirements and fan air volume, as well as special shape specifications such as elbows and tees. Pay attention to the direction of the air. flow rate when connected.

6. It should be hung in the tunnel straight and straight, tightened and hung tightly, hung at each turn, repaired when damaged, rotated slowly, and removed from the water to help reduce resistance. (Repair method: wash the damaged area, dry it and treat it with glue) Usage: Used in kitchen and bathroom, home and small household appliances

Category: Regulation of temperature and speede, induction motor.

Points to note when using the hair dryer:

1 The hair dryer can only be used at home and not for other industrial purposes!

2 Make sure your hands are dry when using! Never immerse the hair dryer in water!

3 Make sure the product is kept away from water. Do not use the hair dryer in the bathroom or near other containers of water!

4 The hair dryer turns off automatically when the overheating protection device works and can be used again after a few minutes of cooling!

5 Do not block the air inlet or outlet of the hair dryer. Keep the air intake grille clean and don't let it be blocked by hair!

6 After each use, the power supply should be disconnected immediately. After cooling, store it in a well-ventilated, dry place, away from sunlight.

1. According to the latest coal mine standards, the air duct should not be more than 5 m from the coal tunnel working face and 7 m from the rock tunnel working face, and there should be no break in the air duct.

2. Use a fireproof air duct: the air duct joint is tight (no air leakage is felt at a distance of 0.1 m from the joint) and there is no breakage (except at the end). 20 m). There is no reverse seal. The soft air duct joint should be counter-pressed, the hard air duct joint should be padded, and the screws should be tightened.

3. The hair dryer should be hung straight and straight, and should be hung wherever there is a ring.

  • Popular Focus
  • Where is the cheapest battery wholesale?

    Where is the cheapest battery wholesale in Tangxia, Sanyuanli, Baiyun District? There is an enterprise specializing in the independent production of electric vehicles in Tangxia, Sanyuanli, Baiyun District, Baiyun Sanyuanli Avenue, Baiyun Sanyuanli Street
    08-02
  • Four 3.7V lithium batteries in series and parallel produce 7.4V/4.4A. How to reduce it to 4.8V/4.4A?

    Four 3.7V lithium batteries in series and parallel produce 7.4V/4.4A. I personally think it is impossible to reduce it to 4.8V/4.4A. Because the discharge platform of lithium batteries is generally set
    08-10
  • What are the materials of the negative electrodes of lithium batteries?

    What are the materials of the negative electrodes of lithium batteries? The main commercial applications of lithium batteries include graphite, which is a sheet of copper used to guide current and which does not react. another safe
    08-02
  • The difference between 18500 and 26500 batteries

    What is the difference between 18500 and 26500 batteries? The answer above is 18650. The person asking the question should ask what is the difference between 18505 and 26500 batteries. In the case of Fuant ER1
    08-02
  • What does 3.7V 80mAh written on a lithium battery mean?

    What does 3.7V 80mAh written on a lithium battery mean? 3.7 V, 80 mA = 0.08 A, H means 1 hour, or 3600 seconds. Taken together, it is
    08-02
  • How long does a lithium battery (cell phone battery) last?

    How long does a lithium battery (cell phone battery) last? The lifespan of mobile phone batteries, under normal conditions of use and without serious impact, the lifespan set by the manufacturer must be 5 years.
    08-02
  • Will lithium batteries explode when charging?

    Will lithium batteries explode when charged? Will lithium batteries explode when charged? Lithium battery explosions usually occur during the charging process, because the negative electrode material of lithium batteries is graphite or other carbon materi
    08-02
  • Parameters of lgdas31865 lithium battery

    Parameters of lgdas31865 lithium battery The parameters of lgdas31865 lithium battery are as follows: LGDAS31865 is a model 18650 lithium battery with a capacity of
    08-02
  • What are the main components of lithium battery electrolyte?

    What are the main components of lithium battery electrolyte? The composition of lithium battery electrolyte is shown below. 1. Ethylene carbonate: molecular formula C3H4O3. Colorless transparent liquid (>35℃), room temperature
    08-02
  • Who are the lithium battery manufacturers in Shandong?

    What are the lithium battery manufacturers in Shandong? Shandong Shengyang Power Supply Co., Ltd. and Shandong Weineng Environmental Protection Power Technology Co., Ltd. 1. Shandong Shengyang Power Supply Co., Ltd. is located in Shengyang, Qufu City.
    08-02
  • Types of drone batteries available in 2024

    Part 1. Types of drone batteries available in 2024In 2024, drone batteries have advanced significantly, offering a range of options to cater to various needs in
    07-30
  • How long does it take to charge 26650 battery?

    How long does it take to charge a 26650 battery? The charging time for a 26650 battery is generally between 3 and 6 hours, but the precise time depends on the power of the charger and the capacity of the battery. in general
    08-02
  • For what?Sure, here's an article based on the phrase "For what?

    The simple yet profound question, "For what?" often serves as a gateway to deeper reflections on purpose and intention. It is a query that invites us to delve into the reasons behind actions, decisions, and circumstances that shape our lives and the wor
    08-02
  • Choosing the Right Cart Battery

    This comprehensive guide will walk you through everything you need about cart batteries, from understanding different types to making an informed purchase decision.
    08-02
  • 30mAh~500mAh 3.7 V Li-ion Battery

    Welcome to Ufine's collection of 3.7V lithium-ion batteries ranging from 30mAh to 500mAh. Explore a diverse range of compact and lightweight batteries suitable for various electronic devices,
    08-02
  • Here are 10 essential facts about drone batteries for 2024.

    10 Key Facts About Drone Battery for 2024 In 2024, drone batteries have advanced significantly, offering a range of options to cater to various needs in the consumer, commercial, and industrial sectors. Below are the primary types of drone batteries avai
    08-02
  • Could you please explain the difference among IMR, ICR, INR, and IFR 18650 batteries?

    What is the Difference Between IMR, ICR, INR, and IFR 18650 Battery?In 18650 batteries, discerning the differences among IMR, ICR, INR, and IFR types is fundamental for tailored and efficient battery usage. These distinct
    08-02
  • Safety considerations for cart batteries

    Selecting the ideal cart battery is crucial for ensuring optimal performance and longevity of your electric vehicle or vaping device. This comprehensive guide w
    08-01