The installation method of the timing belt is as follows:
1. Align the mark on the camshaft timing gear with the mark on the valve cover.
2. Align the mark on the crankshaft timing gear with the mark on the front cover.
3. Install the timing belts in sequence.
4. Loosen the pulley and install the bolt 1/4 to 1/2 turn. Compress the automatic tensioner push rod to the lowest position and insert the steel needle into the hole. Use circlip pliers to adjust the pulley. Turn counterclockwise to make the two pulley adjustment holes parallel to the ground. and remove the steel needle.
5. Rotate the crankshaft 2 turns clockwise and check if the timing mark is correctly aligned.
6. Returnez to the engine, with your right finger on the lower outer timing belt cover and the upper outer timing belt cover.
7. Replace the generator and A/C compressor belts.
8. Check if there is any abnormality in the engine.