Depending on the shape of the tent selected, one end of the windproof rope is generally tied to the tent, and the other end is nailed to the ground with ground nails and tightened in four directions to prevent the tent from being blown away by the wind. At the same time, use floor nails to secure the four corners to the ground. Some floor nails are not easy to insert and must be hit with something. This can easily damage the floor nails. easy place to insert.
What is the correct way to use the tent wind rope buckle?
The method of tying the tent windproof rope is as follows:
Material preparation: tent windproof rope .
Step One: Remove the ring rope near the end of the rope in the sliding piece and cover the nails with soil. Regardless of the type of tent stake used, it is used to tighten it. The tied end isthe sliding end and the other end which is not knotted is the non-split end.
Step 2: Select the location of the floor nails based on the soil conditions. Generally speaking, the smaller the angle between the windproof rope and the ground, the better the wind resistance of the tent. Insert the floor nails into the ground at a 45 to 60 degree angle to maximize stress.
Step 3: Tighten the front end of the windproof rope with one hand, hold the three-hole slide with the other hand and push it closer to the end of the tent . Tighten firmly, the tighter the better.
Step 4: Let go of your hands. If the entire tent rope is still very tight, it means that the windproof rope is installed. If you notice any play, simply follow the method above and continue to tighten it.
The functions of the tent windproof ropes:
1 To hold the tent
It is necessarybe sure to use the power of windproof ropes and ground nails. Only then can the tent be completely pitched.
2. Provides more stability
Once the tent is set up, it can move away when the wind blows. If you want the tent to be more stable, you should always use it. windproof ropes. With windproof ropes, the tent can withstand any wind and rain. It will provide support to the tent, increasing the stability and support of the tent, allowing it to remain stable in windy environments and able to withstand snow or rain.
3. Maintain ventilation
The windproof rope also plays a very important role, that is, separating the outer tent and separating the outer tent from the inner tent. only improves air circulation inside the tent and also prevents condensation from dripping onto your sleeping bag.
Usually, the tentsBetter quality s will have two layers: inner and outer. The inner layer will be supported by tent poles, and the outer layer will be set up outside (there are other construction methods of course). , and it will be secured by windproof ropes and ground nails, maintaining a separation distance with the inner tent, which is essential for air circulation and to avoid condensation.
4. More space
Stretching outward the windproof ropes and ground nails will make the tent completely open, like the corners, providing more space.
5. Complete the construction of the front part of the tent
Most tents have a front part, and this part needs the support of the windproof rope to complete the construction.
1. First, center the tent wind rope slider. Remove the ring rope near the end of the rope as shown ins the image below:
2. Then use it to cover the nails with soil, as shown in the image below:
>3. Then select the soil based on the soil conditions. Regarding the position of the nails, generally speaking, the smaller the angle between the windproof rope and the ground, the better the wind resistance of the tent. Insert the floor nails into the ground. at an angle of 45 to 60 degrees, so that the force is greatest, as shown in the figure below:
4. Then adjust the tightness of the wind rope, as shown in the figure below:
p>
5. Release your hands. If the entire tent rope is still very tight, it means that the wind rope adjustment is complete: