1. Diesel generators must have air inlet and exhaust to prevent poor generator heat dissipation from causing generator set failure. If ventilation is poor, a water tower or enclosed type can be used (the generator supplier does this) <. /p>
2. The generator must be connected to the fire emergency line.
3. In case of power failure, the generator starts, the ATS cabinet automatically closes and connects the fire pump, emergency lighting, fire elevator, etc. These must be routed separately from residents' electricity. Turn on the generator close indicator light, voltage, frequency, current, etc.
ATSE (Automatic Transfer Switching Equipment) is an automatic transfer switching device; it is composed of one (or more) transfer switching devices and other necessary devices, and is used to monitor circuits(voltage loss, overvoltage, undervoltage, phase failure, frequency deviation, etc.) and automatically converts one or more load circuits from one power supply to another. Like the conversion of mains power and power generation, the conversion of two mains power supplies is mainly suitable for low-voltage power systems, that is, the rated AC voltage does not exceed 1000V or DC does not exceed 1500 V, and the power supply. to the load is interrupted during the power conversion period.