Electricity consumption is 0.567 kWh per hour.
The question asks about energy consumption per ton of water per 100 meters, that is, the energy consumed to discharge 1 ton of water 100 meters height. Now combined with the formula of energy consumption per ton of water per 100 meters, we will analyze how to better save energy and reduce the consumption of the drainage system used in coal mines. Wt·100=13.673·ηηcηdηg (kW·h/t)·100 In the formula: η is the efficiency of the water pump; etac is the transmission efficiency etad is the engine efficiency; It can be seen from the formula that for a drainage system with a certain measuring height, since the transmission efficiency of the water pump mainly depends on the transmission mode and transmission method of the water pump, the Motor efficiency mainly depends on the power factor. These two yields do not changenot much and are approximately constant values. Electricity consumption per ton of water per 100 meters is only inversely proportional to the product of the pump duty point efficiency and the pipeline efficiency.
Unit electricity consumption is generally calculated by dividing electricity consumption per unit time by product production per unit time. For example, 100 tons of cement are produced in August and the electricity consumption is 100 kWh. the unit consumption of cement products during this month is 1 kWh/ton. Generally speaking, the unit consumption of each month is different and is also affected by load characteristics, production process, weather conditions, production line equipment and other related factors. be evaluated in a region. For example, the GDP of a certain region is 100 billion yuan, the conelectricity consumption is 50 billion kWh, then the unit consumption in this area is 0.5 kWh/yuan.