The details are as follows:
1. Dams Most hydroelectric plants rely on dams to hold back water, forming a huge reservoir.
2. When the water inlet opens the dam gate, the water will pass through a water channel called a tunnel under the action of gravity, which will guide the water flow to the turbine. Water pressure increases as it flows through a stream.
3. The water flow from the hydraulic turbine impacts and rotates the huge blades of the hydraulic turbine, and the hydraulic turbine is connected to the generator above by a transmission shaft. The most common turbine in hydroelectric power plants is the Francis turbine, which resembles a large plate with curved blades. According to data provided by the Foundation for Water and Energy Education (FWEE), the turbine can weigh up to 172 tons and rotate at a speed of 90 revolutions per minute.
4. DuringAs the generator's turbine blades rotate, a series of magnets in the generator also rotate together. Huge magnets spin through copper coils, moving electrons to create an alternating current.
5. The water present in the drive shaft reservoir that connects the turbine and the generator is considered stored energy. When the door is opened, the water flowing through the tunnel is converted into kinetic energy because it is in motion.
6. The amount of electrical energy that can be generated depends on several factors, two of which are the size of the water flow and the height of the water. Water height refers to the distance between the water surface and the turbine blades. The higher the water height and water flow, the more electrical energy is generated. The water height generally depends on the storage capacity of the tank.
The basic principle of h productionHydroelectricity in hydroelectric power stations is to use the difference in water level to produce electricity in conjunction with a hydroelectric generator.
The principle of hydropower generation is: hydropower uses hydraulic energy to drive hydraulic machinery (water turbine) to rotate, converting the energy from the water into rotating mechanical energy if another type of machinery (generator) is used. is connected to the water turbine), electricity can be generated when the turbine rotates, and the mechanical energy is converted into electrical energy.