Electrolyzed water generally refers to the product generated after electrolysis of water containing salt (such as sodium sulfate, table salt is not allowed and chlorine gas will be generated) . The electrolyzed water itself is neutral and other ions can be added, or it can be separated by a semi-permeable membrane to generate water with two properties. One of them is alkaline ionized water and the other is acidic ionized water. Electrolyzed water using sodium chloride as the electrolyte contained in water will contain sodium hydroxide, hypochlorous acid and sodium hypochlorite after electrolysis (if pure water undergoes electrolysis, only the hydroxide ions, hydrogen gas, oxygen and hydrogen ions will be produced).
Preparation of electrolytic water:
1. Lemonade
Lemonade is a common electrolyte water. There are many ways to prepare it. use lemon slicesn dried. Drink directly after infusion with hot water. At this time, the water temperature is preferably boiling water around 95 degrees, otherwise the nutrients in the lemon slices will be difficult to separate and the taste will be quite strong. bland and strange, because the degree of water loss in dried lemon slices is relatively large.
When using fresh lemons to make lemonade, you need to wash the lemons with salt, rinse them with water and cut them into thin slices. The thickness should be 0.2-0.3cm, then put them in a cup. and crush them after adding honey or syrup, pour warm water at 40-50 degrees Celsius, stir and leave for 30 minutes before drinking.
2. Light Salt Water
Light salt water is the simplest electrolytic water. Its preparation is extremely simple. Just add a small amount of salt to the cup to dissolve it.The amount of salt is related to the capacity. Additionally, sugar and salt can be used to make electrolytes, which are very helpful in relieving vomiting and discomfort caused by severe dehydration. cup in a ratio of 6:1. Then dissolve it with warm water. Note that if the amount of salt is too much, the taste will be relatively salty.
3. Proportion method
Put 1000 grams of glucose, 175 grams of sodium chloride, 125 grams of sodium bicarbonate and 75 grams of potassium chloride in a cup, then pour 1000 ml. of clean water or hot water and it can be made. This type of electrolytic water is generally not used for drinking, but is used as industrial electrolytic water. As the water content increases or decreases, the content of other substances must also change.
4. Mung bean soup
Mung bean soup is also a kind of elelectrolytic. When making mung bean soup, all you need to do is wash the mung beans and add them to the pot. , and add water for cooking. After cooking, add salt or rock sugar to enhance the flavor. It contains flavor-enhancing ingredients and is tied to personal taste preferences. If you want the mung bean soup to be sandy, you can wash it and. put it in clean water, place it in the freezer and keep it for 30-60 minutes. Then move on to cooking.
5. Orange Water
There are many ways to prepare orange water, but common orange water involves using orange peels to soak in water. infuse with dried orange peels as they are fresh. Orange peels are rich in volatile substances, which are very irritating to the intestinal tract. Therefore, it is easy to causeinternal heat and stomach upset after drinking dried orange peel. water, first use Rinse the oranges in water. Then put it in water and cook for 5 to 10 minutes. At this point, boil over high heat for 1-2 minutes, then cook over low heat.
First of all, it may be because the time is too long, because if you put salt water in the cup, chemical changes will occur. If the time is too long, chemical changes will occur. Will become more intense, some substances, even some toxic substances, will be produced, and the green color means that some substances are produced, so the cup will turn green when salt water is put into it.