The steps to disassemble and clean the fan are as follows:
Preparation of materials: screwdriver.
1. Remove the front fan cover. The housing sits on the edge of the fan and can be removed with a regular screwdriver. If you don't have a screwdriver, you can also use a fruit knife or wrench. There is a fixing screw on the edge, you can find it if you look closely.
2. Remove the fan blades. After disassembling the case, there is a fixing screw in the center of the fan blade. You can unscrew it by turning it clockwise with bare hands (note that it is clockwise), then the fan blade can be removed. Turn the plastic cap in the middle clockwise to unscrew the fan blades and remove them to remove the fan blades.
3. Removez the rear cover of the fan. The rear cover fixing screw is also in the middle. Note that this screw needs to be turned counterclockwise to unscrew it, then the back cover can be removed. Turn the middle screw counterclockwise to remove the screw, then remove the back cover.
4. Clean the removed parts. All removed parts can be cleaned with water and will not affect the use of the fan. Everything except the "stem" can be cleaned with water.
5. Follow the steps to install the fan to get cooler, cleaner air. When installing, pay attention to the groove on the back of the fan blade and the iron bump protruding from the center bearing.
The temperature gradually rises and the air conditioning seems a bit useless. It's time to remove the Smartmi fan at home. However, the bladesfan from some users have accumulated a lot of dust. Today we will tell you how to clean it.
Tools/Materials
more
Zhimi DC variable frequency floor fan, Smartmi natural wind fan, 349 yuan Mijia DC variable frequency floor fan , Smartmi DC variable frequency floor fan 2, Zhimi DC variable frequency floor fan 2S. Screwdriver, cloth, water
Method/steps
1/4 Step by step reading
In the first step, unscrew the fan cover bolts under the fan cover, then gently turn the front fan cover counterclockwise, and the front and rear fan covers will come off after a while.
2/4
The second step is to remove the fan blade knob by turning it clockwise in the direction indicated on the fan blade knob. Lfan blade.
3/4
The third step is to remove the fan blades. You can wipe them with a cloth or rinse them with water and dry them. It is not recommended to use a relatively hard brush and do not use excessive force when cleaning to damage the fan blades.
4/4
The fourth step is to remove the fan cover button according to the direction shown, and the fan cover can be easily removed. Users can clean the front and rear fan covers.
See the remaining photo
Notes
Before starting disassembly, be sure to turn off the power to avoid any accident. injury
The fan blades and fan cover are made of ABS material, please do not disassemble them vigorously
It is not recommended to use corrosive cleaners