When choosing bottled water equipment, you should first consider the following aspects:
1. The overall factory investment budget and factory planning should not be less than 600 square meters. You can make a water quality test report of the water source and check the conductivity of raw water quality.
2. When choosing a manufacturer, choose a company with comprehensive qualifications, including water-related approval documents, environmental impact assessment qualifications, test reports, permits sanitary facilities, etc. On-site inspection of the manufacturer's production capacity, shipment volume, whether there are many successful cases and whether the after-sales system is complete.
3. When selecting equipment, consider the equipment process. You can refer to the “Technology Parameter Tableie Zhengzhou AIA Water Treatment” to choose a production line that suits you. The process is as follows: Raw water treatment equipment includes: raw water tank - booster pump - quartz sand filter - activated carbon filter - dosing device - safety filter - water filter system reverse osmosis - ultraviolet sterilizer - ozone sterilization
The fully automatic bottled water filling line includes: a fully automatic capping machine - a fully automatic barrel brushing machine - a machine Fully Automatic Drum Loading Machine - Fully Automatic Filling Machine - Fully Automatic Light Inspection Film Closing Machine ---- Fully Automatic Bucket Bagging Machine
4. Regarding technical training, it is necessary to communicate in advance with the manufacturer. Technical engineers in water treatment mustwind guarantee stable water flow of the production line according to production needs, and training is in place, mainly for operation and operation. use of equipment, daily maintenance and execution of equipment maintenance parameter sheets.
I want to create a small bottled water production line in rural areas, with a daily production of around 100 barrels. Could you please give me some advice on what equipment is needed and where can I purchase it? Thank you
First of all, an important principle is that you must have water resources. If you don't have resources, you can't build a water plant. So the first step is to detect the water. source
The second factory The area is not less than 100 square meters, which is the minimum
Third, a complete set of equipment is required for manufacturingmineral water ion, filling machine, inkjet printer, labeling machine, packaging machine and other equipment are needed. What other equipment is ozone wind? A shower room air purifier, light inspection bottle cap sterilizer.
Fourth, if you make small water bottles, the price should be around 200,000 , or about 2,000 per hour, so making small bottles is not that simple. To contact me, please click on my avatar.
If you want 100 barrels per day, the volume is very small. 100 barrels make 1900 L, or less than two tonnes of water. Your 0.5 ton/h equipment can operate 4 hours per day. No matter how small it is, it will not be standardized
The process is ultrafiltration (reverse osmosis) → filling line (automatic/semi-automatic available, semi-automatic recommended)
< p>What is the quality of the water there?down ? If it's good, use the mineral water equipment, it's very cheap and the water is good. Ultrafiltration is very cheap, it costs between 40,000 and 50,000 RMB depending on the quality of the equipment.If your water quality is average, you can buy pure water equipment and use reverse osmosis, which is much more expensive, 40,000 RMB to 80,000 RMB
p>
In fact, the equipment is secondary and there is not much 'employees. The cost of a bucket of water is 3 to 5 cents, and including water delivery, it only costs 1.5 yuan. But the license is difficult to obtain, and if there is no relationship, it is difficult to operate it. You can ask me for details