1. The quality of the belt is poor. The pulley is deformed or the bearing is badly worn, or the two pulleys are not in a horizontal line when rotating, causing the belt to fall off.
2. The plane of the generator pulley (driven pulley) is not on the same plane as the plane of the generator pulley driven by the engine (driving pulley). If the plane is misaligned, the belt will wear. quickly.
3. Adjust the generator position and calibrate the pulley plane to resolve the problem. Both wheels are tested with a standard ruler and there should be no tilt angle up, down, left or right. It cannot be misaligned front to back.
1. Loosen the generator mounting screw and belt tension adjustment screw, push the generator against the engine to minimize the distance between the pulleys, then straighten the belt sleeve.
2. Adjust the tightness of thea belt to the appropriate level, then tighten the motor mounting screws and adjustment screws.
3. The motor is suitable not only for power generation devices, but also for complete machines, including power units.