Introduction to Car Engine Compartment Cleaning Methods

Introduction An introduction to the method of cleaning the car engine compartment. Proper cleaning of the car engine can be divided into four stages. 1. Park the car in a place with a drain outlet. After cleaning, the engine compartment of the vehicle will be closed.

Introduction to Car Engine Compartment Cleaning Methods

Properly cleaning a car engine can be divided into four stages, let's take a look.

First, park the car in a place with a drainage outlet

After cleaning the engine compartment of the vehicle, the sewage will flow to the road . Environmental pollution is not acceptable, therefore it is recommended. Have everyone park the car where there is an outlet before cleaning the engine.

Second, remove the decorative engine cover

In order to enhance the beauty of the engine compartment, many car models are now designed with plastic decorative covers. Generally speaking, this plastic cover. the cover is fully secured with buckles. You can directly hold the edge of the cover and pull it up to remove it.

Third, clean the sludge

Cleaning products have adverse effects on the body and odeur is very irritating. It is best to wear rubber gloves and a protective mask when cleaning the engine. Spray cleaning product on each component of the engine compartment. Mainly treat areas with a lot of sludge, but be aware that some parts of the engine compartment should be protected from water or cleaning fluid. Pay attention to the fuse box, sparks. plugs, generator and ECU. Do not splash water or cleaning agents into the car computer. It is better to take anti-humidity measures (cover it with plastic wrap).

Use a small brush to clean the areas where the cleaning agent has been sprayed. After removing it with the brush, wait about 2-5 minutes to allow the cleaning agent to continue to "eat" the sludge. they are completely broken and cleaned. Once the agent has broken down the sludge, clean it with water fstiff. Once all the water has been washed away, the water on the engine compartment parts will be cleaned off, if any, with a cleaner drying. is a better method.

Four. Engine Compartment Maintenance

After cleaning, we need to use the vehicle wiring harness maintenance agent for maintenance. It is commonly used on the engine compartment and can be easily used. in the automotive parts market. You can buy it easily and the price is around 20-50 yuan. After the clean engine has completely dried, spray the vehicle wiring harness maintainer evenly on each component in the engine compartment, close the engine hood. firmly and start the module for approximately 3-5 minutes to allow the engine components to fully absorb the protective agent.

The content above is only my personal opinion. If you have different opinions and ideas, youcan leave a message to discuss it together and look forward to your response.

The main things you can see are the following. 1. Engine It goes without saying that the engine is the heart of the car and the source of energy necessary for driving. 2. Engine oil dipstick. The engine oil dipstick is the only input to detect the quality and quantity of engine oil. By removing the engine oil dipstick, you can roughly determine whether the engine oil is dirty or accurately determine the remaining amount of engine oil. oil. 3. The engine oil filler port should be unscrewed and filled with oil when the vehicle is stopped and the engine is off. 4. Air filter box, open the air filter box cover and you can see the air filter element inside. The air filter element is different from the air conditioning filter element. The function of the air filter element is to filter the air aspiped into the intake system to ensure that clean air enters the cylinder for combustion. The air conditioning filter element is responsible for filtering the air blown into the car by the fan. The air filter housing in the engine compartment contains the air filter element and the air conditioning filter element. The replacement location is usually behind the glove box of the car. 5. Battery When the vehicle is started, the battery provides electricity for the starter, ignition system, electronic fuel injection and vehicle lighting. 6. The ABS pump is the anti-lock braking system. 7. Brake fluid filling port. Brake fluid is the liquid medium that transmits braking pressure in the hydraulic brake system. Brake fluid is also called brake oil or forced oil. 8. Glass water filling port, glass water is a liquid ofcar windshield cleaning. 9. Antifreeze fill port Antifreeze can prevent the coolant from freezing and cracking the radiator and freezing the engine cylinder when parking in cold seasons. When you need to fill fluid, it is best not to fill it yourself to avoid accidentally adding it and damaging the car. Call a professional to handle it!

I hope it can help you and I hope you adopt it

  • Popular Focus
  • Where is the cheapest battery wholesale?

    Where is the cheapest battery wholesale in Tangxia, Sanyuanli, Baiyun District? There is an enterprise specializing in the independent production of electric vehicles in Tangxia, Sanyuanli, Baiyun District, Baiyun Sanyuanli Avenue, Baiyun Sanyuanli Street
    08-02
  • Four 3.7V lithium batteries in series and parallel produce 7.4V/4.4A. How to reduce it to 4.8V/4.4A?

    Four 3.7V lithium batteries in series and parallel produce 7.4V/4.4A. I personally think it is impossible to reduce it to 4.8V/4.4A. Because the discharge platform of lithium batteries is generally set
    08-10
  • What are the materials of the negative electrodes of lithium batteries?

    What are the materials of the negative electrodes of lithium batteries? The main commercial applications of lithium batteries include graphite, which is a sheet of copper used to guide current and which does not react. another safe
    08-02
  • The difference between 18500 and 26500 batteries

    What is the difference between 18500 and 26500 batteries? The answer above is 18650. The person asking the question should ask what is the difference between 18505 and 26500 batteries. In the case of Fuant ER1
    08-02
  • What does 3.7V 80mAh written on a lithium battery mean?

    What does 3.7V 80mAh written on a lithium battery mean? 3.7 V, 80 mA = 0.08 A, H means 1 hour, or 3600 seconds. Taken together, it is
    08-02
  • How long does a lithium battery (cell phone battery) last?

    How long does a lithium battery (cell phone battery) last? The lifespan of mobile phone batteries, under normal conditions of use and without serious impact, the lifespan set by the manufacturer must be 5 years.
    08-02
  • Will lithium batteries explode when charging?

    Will lithium batteries explode when charged? Will lithium batteries explode when charged? Lithium battery explosions usually occur during the charging process, because the negative electrode material of lithium batteries is graphite or other carbon materi
    08-02
  • Parameters of lgdas31865 lithium battery

    Parameters of lgdas31865 lithium battery The parameters of lgdas31865 lithium battery are as follows: LGDAS31865 is a model 18650 lithium battery with a capacity of
    08-02
  • What are the main components of lithium battery electrolyte?

    What are the main components of lithium battery electrolyte? The composition of lithium battery electrolyte is shown below. 1. Ethylene carbonate: molecular formula C3H4O3. Colorless transparent liquid (>35℃), room temperature
    08-02
  • Who are the lithium battery manufacturers in Shandong?

    What are the lithium battery manufacturers in Shandong? Shandong Shengyang Power Supply Co., Ltd. and Shandong Weineng Environmental Protection Power Technology Co., Ltd. 1. Shandong Shengyang Power Supply Co., Ltd. is located in Shengyang, Qufu City.
    08-02
  • Types of drone batteries available in 2024

    Part 1. Types of drone batteries available in 2024In 2024, drone batteries have advanced significantly, offering a range of options to cater to various needs in
    07-30
  • How long does it take to charge 26650 battery?

    How long does it take to charge a 26650 battery? The charging time for a 26650 battery is generally between 3 and 6 hours, but the precise time depends on the power of the charger and the capacity of the battery. in general
    08-02
  • For what?Sure, here's an article based on the phrase "For what?

    The simple yet profound question, "For what?" often serves as a gateway to deeper reflections on purpose and intention. It is a query that invites us to delve into the reasons behind actions, decisions, and circumstances that shape our lives and the wor
    08-02
  • Choosing the Right Cart Battery

    This comprehensive guide will walk you through everything you need about cart batteries, from understanding different types to making an informed purchase decision.
    08-02
  • 30mAh~500mAh 3.7 V Li-ion Battery

    Welcome to Ufine's collection of 3.7V lithium-ion batteries ranging from 30mAh to 500mAh. Explore a diverse range of compact and lightweight batteries suitable for various electronic devices,
    08-02
  • Here are 10 essential facts about drone batteries for 2024.

    10 Key Facts About Drone Battery for 2024 In 2024, drone batteries have advanced significantly, offering a range of options to cater to various needs in the consumer, commercial, and industrial sectors. Below are the primary types of drone batteries avai
    08-02
  • Could you please explain the difference among IMR, ICR, INR, and IFR 18650 batteries?

    What is the Difference Between IMR, ICR, INR, and IFR 18650 Battery?In 18650 batteries, discerning the differences among IMR, ICR, INR, and IFR types is fundamental for tailored and efficient battery usage. These distinct
    08-02
  • Safety considerations for cart batteries

    Selecting the ideal cart battery is crucial for ensuring optimal performance and longevity of your electric vehicle or vaping device. This comprehensive guide w
    08-01