After replacing the antifreeze, discharge the gases from the thin tube of the small kettle into the water tank. The specific steps are as follows:
1. Run the Geely Emgrand engine until there is water. the temperature rises to 90° After that, stop the engine.
2. Let the Geely Emgrand engine sit until the temperature drops to normal.
3. Pull the hood switch of the Geely Emgrand.
4. Lift the hood of Geely Emgrand.
5. Slowly lift the kettle lid from the water tank to release the high pressure gas inside.
6. Add antifreeze to the MAX position and you're done.
1. Jiusi Civic has 60,000 kilometers of antifreeze and a replacement capacity of 6 L. Its antifreeze tank is located on the right side of the engine.
2. The replacement method is as follows: 1. Park the vehicle for a period of time untiluntil the antifreeze cools, find the antifreeze drain valve at the bottom of the water tank and loosen it. 2. Keep the car idling and pour clean water into the antifreeze reservoir. no longer flows, close the drain valve and the motor. 4. Add new antifreeze to the fill port until the fill port is between the lowest mark and the highest mark;
The length, width and height of the 3rd and 9th generation Civic are 4,535 mm, 1,755 mm and 1,450 mm respectively, and the wheelbase is 2,670 mm. Equipped with a 5-speed manual transmission, the top speed is 199 km/h.